CYLINDER COOLING TINS

These Black Single Port Cylinder Tin shrouds are built out of stamped steel and made to the exact specs of the original style so that no gaps exist. Sitting between the push rod tubes and cylinders, it forces air directly to the cylinder making sure it stays at perfect running temperature. Fits most 1300cc-1600cc Air-Cooled Volkswagen Engines and comes in pairs.
113-119-303B/4G

These Chrome Single Port Cylinder Tin shrouds are built out of stamped steel and made to the exact specs of the original style so that no gaps exist. Sitting between the push rod tubes and cylinders, it forces air directly to the cylinder making sure it stays at perfect running temperature. Fits most 1300cc-1600cc Air-Cooled Volkswagen Engines and comes in pairs.

These brand new dual port cylinder shrouds are just the thing needed to finish off your motor. They come in either custom chrome or stock black.
113-119-303J/4H

These brand new dual port cylinder shrouds are just the thing needed to finish off your motor. They come in either custom chrome or stock black.
113-119-303J/4H

These brand new dual port cylinder shrouds are just the thing needed to finish off your motor. They come in either custom chrome or stock black.
113-119-303J/4H

These brand new dual port cylinder shrouds are just the thing needed to finish off your motor. They come in either custom chrome or stock black

Off Road cut, Dual port cylinder tin set. These tins have been trimmed for a nice clean look. Also allows easier access to spark plugs. Great for any open engine VW project.

Off Road cut, Dual port cylinder tin. These tins have been trimmed for a nice clean look. Also allows easier access to spark plugs. Great for any open engine VW project.

Type 1 and 3 cooling tins. By design the Type 3 had a habit of running higher head temperatures and this was the cure. Sold in pairs. Use these is place of the smaller stock deflector plates for berrer cooling on your Type 1 Engine. WILL NOT FIT Type 4 Engines.
113-119-451D

Type 1 and 3 cooling tins. By design the Type 3 had a habit of running higher head temperatures and this was the cure. Sold in pairs. Use these is place of the smaller stock deflector plates for berrer cooling on your Type 1 Engine. WILL NOT FIT Type 4 Engines.

Air deflectors. These are a required deflector plate that snap up under your cylinders to deflect air around the cylinder for proper cooling. A must on air cooled vw motors. SOLD EACH need 2 per engine. You may choose the larger, wrap around cooling tins, 4526-15 chrome or 4526 black, instead.

High quality shroud screw hardware to complete your engine. Has all the screws to hold your tins in place.
This kit will allow you to bolt your cylinder covers to the head as well as the Alternator/Generator backing plate to the fan shroud
Drive Type: Flat Head
Coating: None
Quantity: 12 Pieces

Cool looking stainless steel button head allen shroud screws with stainless steel washers to finish off your shroud and tins. Includes 34 screws, 34 washers and an allen wrench

These are the short pieces that fit under the big cylinder tin towards the crank pulley. They hold the large cylinder tins in place as well as deflecting air down and around the #2 and #4 cylinders

These are the short pieces that fit under the big cylinder tin towards the crank pulley. They hold the large cylinder tins in place as well as deflecting air down and around the #2 and #4 cylinders.

Stainless engine tin hardware hit. For Type 1 Beetle

Black engine tin hardware hit. For Type 1 Beetle