Quickcar Sending Units

Quickcar 611-900 1/2 In -NPT Temperature Seat Bung This QuickCar fitting is an adapter for a mechanical temperature gauge probe. Features a 1/2 NPT outside thread and is made from high-quality brass material. Sold each.

Quickcar 611-901 Aluminum 1/2 In -NPT Temperature Seat Bung This QuickCar fitting is an adapter for a mechanical temperature gauge probe. Features a 1/2 NPT outside thread and is made from high-quality aluminum and now anodized black. Sold each.

Quickcar 611-902 Aluminum 3/8 In -NPT Temperature Seat Bung This QuickCar fitting is an adapter for a mechanical temperature gauge probe. Features a 3/8 In -NPT outside thread and is made from high-quality aluminum and now anodized black. Sold each.

Quickcar 611-903 Long 3/8 In -NPT Temperature Seat Bung 3/8 In NPT Long Temp adapter for when temperature probe is unable to be tightened because of interference inside the port. Aluminum.

Quickcar 61-724 Straight 1/8 In NPT Female to -4AN Male Steel fitting commonly used to attach on the back of a pressure gauge so a steel braided pressure line can be installed.

Quickcar 61-725 Straight 1/8 In NPT Male to -4AN Male Steel fitting commonly used to attach on the engine so a steel braided pressure line can be installed.

Quickcar 61-756 1 In Water Temperature/Pressure Sensor Adapter Black anodized aluminum adapter designed to splice into a 1 In upper radiator hose to allow a place to pick up water temperature or water pressure. Has a 1/8 In NPT port for sender/switch placement and comes with hose clamps to complete the install.

Quickcar 61-757 1-1/4 In Water Temperature/Pressure Sensor Adapter Black anodized aluminum adapter designed to splice into a 1-1/4 In upper radiator hose to allow a place to pick up water temperature or water pressure. Has a 1/2 In NPT port for sender/switch placement and comes with hose clamps to complete the install.

Firewall Grommet - 1 Hole - 3/4 / 1-1/8 / 1-5/8 in OD - Rubber - Black - Set of 3

Quickcar 57-810 Firewall Grommet 8-12 Gauge This QuickCar Firewall Grommet is designed to Fit 8-12 AWG Cable. Made from high-Quality Black Plastic. This grommet mounts securely to the firewall and locks onto the wire that passes through the bushing. Provides a waterproof seal and a vibration proof feed-through. Sold each. Inside Diameter:.300 In

Quickcar 57-820 Firewall Grommet 4 Gauge This QuickCar Firewall Grommet is designed to Fit 4 AWG Cable. Made from high-Quality Black Plastic. This grommet mounts securely to the firewall and locks onto the wire that passes through the bushing. Provides a waterproof seal and a vibration proof feed-through. Sold each. Inside Diameter:.625 In

Quickcar 57-830 Firewall Grommet 2-1 Gauge This QuickCar Firewall Grommet is designed to Fit 2-1 AWG Cable. Made from high-Quality Black Plastic. This grommet mounts securely to the firewall and locks onto the wire that passes through the bushing. Provides a waterproof seal and a vibration proof feed-through. Sold each. Inside Diameter:.725 In

Quickcar 61-717 Sprint Oil Pressure Warning Light Kit QuickCar s standard Sprint Car/Midget Oil Pressure Warning Light Kit. Features one red warning light, one switch, one sending unit, one brass 1/8 NPT T-Fitting, and one 9V Battery. Sender is pre-set for 20 PSI or lower Activation. Sold as one complete kit.

Quickcar 61-719 Quick-Light Fuel Pressure Kit This QuickCar Fuel Pressure Warning Light Kit features a Green Lens and a Sending Unit that is pre-set to activate at 4 PSI and lower. All wiring included. Sold as one complete kit.

Quickcar 63-225 Two Wire Electric Temp Sender Temperature Sending Unit, 2 Wire, Electric, 0-320 Degrees, 1/8 in NPT Male, Each Accurately measure oil or water temperatures with the two wire internally grounded temperature sender meant to work with Digital or Redline Stepper gauges. This durable sender features 1/8 NPT thread for maximum longevity and accuracy. Key Features of 63-225 Two Wire Electric Temp Sender Measures oil and water temperature Works in conjunction with Digital or Redline Stepper gauges Two wire internally grounded temperature sounder features 1/8 NPT thread *Please contact QuickCar sales/tech team to assure proper sending unit and gauge compatibility.*

Quickcar 61-706 4 Warning Light Set Warning lights when used with correct sending units alert drivers of problems such as low oil pressure or overheating. QuickCar s warning lights install by snapping into place in a 3/4 In hole in.040 In -.063 In of material. Designed for 12V systems, they can easily be converted to 16V with LED light bulbs (PT.# 61-698). Female spade connectors are needed to slide wires onto the back of the light for positive and negative power connections. Colors included are: Red, Blue, Amber, and Green

Mechanical Gauge Senders - Oil Pressure / Fuel Pressure / Water Temperature - Kit

Quickcar 61-722 Pressure Switch Aluminum Tee The best way to mount a pressure sender to a mechanical gauge. QuickCar s light weight Aluminum Tee has 2 1/8 In -NPT ports and 1 -4AN port so no extra adapter is needed in plumbing a fluid line to a gauge. To request these on your QuickCar mechanical gauge panel, call 1-800-997-7333.

Quickcar 60-040 200F Temperature Sending Unit Commonly used as a water temperature sending unit, these senders are generally used to activate a overheating warning light or to supply a ground to a relay controlling an electric fan. Pre-set to 200F, this is a NON-ADJUSTABLE sending unit that has a male spade for a ground wire and 3/4 In NPT threads.

Quickcar 61-730 4 PSI Fuel/Water Pressure Switch This switch is commonly used to activate warning lights on QuickCar gauge panels and Quick-Light kits. It has a 4 PSI pre-set activation point. Unit has 1/8 In NPT threads to install in fuel /water system where desired. Sold each. *Please contact QuickCar sales/tech team to assure proper sending unit and gauge compatibility.*

Quickcar 61-733 30 PSI Oil Pressure Switch This switch is commonly used to activate warning lights on QuickCar gauge panels and Quick-Light kits. It has a 30 PSI pre-set activation point. Unit has 1/8 In NPT threads to install in the oil system where desired. Sold each. *Please contact QuickCar sales/tech team to assure proper sending unit and gauge compatibility.*

Quickcar 61-735 20 PSI Oil Pressure Switch This switch is commonly used to activate warning lights on QuickCar gauge panels and Quick-Light kits. It has a 20 PSI pre-set activation point. Unit has 1/8 In NPT threads to install in the oil system where desired. Sold each. *Please contact QuickCar sales/tech team to assure proper sending unit and gauge compatibility.*

Quickcar 61-750 280 Oil Temperature Switch This switch is commonly used to activate warning lights on QuickCar gauge panels and Quick-Light kits. It has a 280F pre-set activation point. Unit has 1/2 In NPT threads to install in the oil pan on a wet-sump and typically before the hottest oil goes into the cooler on a dry-sump. Sold each. *Please contact QuickCar sales/tech team to assure proper sending unit and gauge compatibility.*

Quickcar 61-718 Sprint Car Deluxe Oil Pressure Warning Kit This QuickCar Oil Pressure Warning Light Kit is the best offered for Sprint Cars/Midgets. It Features a one Red Lens, one waterproof micro Switch, one Sending Unit, one Aluminum 1/8 In NPT T-Fitting and one 9V Battery. Sender is pre-set for 20 PSI or lower Activation. Sold as one complete kit.

Mechanical Gauge Senders - Oil Pressure / Oil Temperature / Fuel Pressure / Water Temperature - Kit

Oil Gallery Manifold - Straight - Dual 10 AN Female O-Ring Inlet - 10 AN Female O-Ring Outlet - 3/8 in NPT Female Port - Aluminum - Black Anodize - Each

Quickcar 63-230 Electric Pressure Sender 0-100psi Oil Pressure/Water Pressure sender/transducer. Reads 0-100 PSI. 1/8 In NPT thread

Quickcar 63-240 Electric Pressure Sender 0-15psi Fuel Pressure Sender/transducer, reads 0-15 psi. 1/8 In NPT thread