MSD PARTS

RPM module kits include five modules in 200 RPM increments. Each kit is within a 1,000 RPM range. RPM range is 6000-6800
RPM Range: 6000-6800
Module Increment: 200 RPM
Quantity: 5 Modules

These rotors are standard on most MSD Pro-Billet distributors. Rotors are injection molded from Rynite material for incredible strength and high dielectric properties. Plus the stainless steel/brass rotor tip is also screwed in place so it can handle extreme RPM and high heat conditions. The rotors also feature deep molded vanes to stir up the air inside the cap to prevent spark ionization. The rotor screws are set deep in the housing to prevent spark scatter
MSD Distributor Cap: 8433, 8431
MSD Distributor:
Quantity: Sold Each

MSD distributor rotors are molded from high quality, voltage insulating material to resist carbon tracking while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage carrying capabilities the rotor tips are made from low resistance brass for maximum voltage transfer
MSD Distributor: 8485 and 8473
Quantity: Sold Each

For use with an MSD blaster coil when connected to a stock points ignition system
Resistance: 0.8 Ohm
Quantity: Sold Each

RPM module kits include five modules in 200 RPM increments. Each kit is within a 1,000 RPM range. RPM range is 7000-7800
RPM Range: 7000-7800
Quantity: 5 Modules

RPM module kits include five modules in 200 RPM increments. Each kit is within a 1,000 RPM range. RPM range is 8000-8800
RPM Range: 8000-8800
Quantity: 5 Modules

RPM module kits include five modules in 200 RPM increments. Each kit is within a 1,000 RPM range. RPM range is 9000-9800
RPM Range: 9000-9800
Quantity: 5 Modules

The RPM module selector plugs directly into the RPM module socket on all MSD Soft Touch rev controls and accessories that use plug-in modules. The user can then select between twelve different RPM limits by simply turning the knob. RPM range is 7600-9800 in 200 RPM increments
RPM Range: 7600-9800
Selector Increment: 200 RPM
MSD Series: Soft Touch

These vibration mounts are a must for offroad cars. Provides shock dampening for the Pro Power Coil, PN 8201. Includes 3 rubber mounts
Quantity: 4 Pack

The MSD distributor advance kits are the same kits that come with your MSD distributor. The kit contains an assortment of springs, advance limit bushings, and a mechanical advance lockout screw
Quantity: Kit
Advance Bushings: 4
Advance Springs: 6

Distributor boots for HEI systems
Quantity: 9 Boots

Quickcar 50-442 MSD Box Quick Release Plate This QuickCar MSD box mount kit provides a quick release method for replacing most popular MSD ignition boxes. Kit includes aluminum box mount, (4) quick turn fasteners with springs and (8) 1/8 In aluminum rivets. Sold as one complete kit.