BATTERY CABLES

Stock style braided battery ground strap for reliable grounding of your chassis and battery
Length: 9 Inches

Stock style braided battery ground strap for reliable grounding of your chassis and battery
Length: 12 Inches

Replace your stock fiberboard cover with this durable abs plastic wire cover. Features black crinkle finish. Can be painted if desired

Stock style braided battery ground strap for reliable grounding of your chassis and battery.
Length: 14 Inches

Spark Plug Wire Holder snaps into the fan shroud on your VW Beetle and bus engine, and allows you to clip in the 7mm plug wires to keep them from moving around and getting damaged on hot or moving engine part.



Fits 7mm wires


Beetle Type 1: 61-79

Bus Type 2: 61-79

Type 3: 62-74

Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection.

Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection.

Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection.

Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection.

Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection.

Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection.

Covers slip over battery cables and cover battery terminals to prevent accidental shorting. Fit most top post mount batteries. Required by many sanctioning racing bodies. Package of two includes one black and one red cover.

Pre-made black cables are built using PVC insulated 4ga copper stranded wire and include ring terminals on each end with 3/8 In mounting holes. Cables are ideal for adding additional ground connections or installing remote starter solenoids. Dimensions listed are approximate center to center of terminal ends.

Pre-made black cables are built using PVC insulated 4ga copper stranded wire and include ring terminals on each end with 3/8 In mounting holes. Cables are ideal for adding additional ground connections or installing remote starter solenoids. Dimensions listed are approximate center to center of terminal ends.

Pre-made black cables are built using PVC insulated 4ga copper stranded wire and include ring terminals on each end with 3/8 In mounting holes. Cables are ideal for adding additional ground connections or installing remote starter solenoids. Dimensions listed are approximate center to center of terminal ends.

Pre-made black cables are built using PVC insulated 4ga copper stranded wire and include ring terminals on each end with 3/8 In mounting holes. Cables are ideal for adding additional ground connections or installing remote starter solenoids. Dimensions listed are approximate center to center of terminal ends.

Pre-made black cables are built using PVC insulated 4ga copper stranded wire and include ring terminals on each end with 3/8 In mounting holes. Cables are ideal for adding additional ground connections or installing remote starter solenoids. Dimensions listed are approximate center to center of terminal ends.

Pre-made black cables are built using PVC insulated 4ga copper stranded wire and include ring terminals on each end with 3/8 In mounting holes. Cables are ideal for adding additional ground connections or installing remote starter solenoids. Dimensions listed are approximate center to center of terminal ends.

Terminals are machined from solid brass stock, 24k gold plated for maximum conductivity and feature 5/16 In fasteners to secure battery cables with ring terminal ends. Top post terminals have additional provisions for attaching accessory or ground wires for a clean appearance. Sold in pairs.

Terminals are machined from solid brass stock, 24k gold plated for maximum conductivity and feature 5/16 In fasteners to secure battery cables with ring terminal ends. Top post terminals have additional provisions for attaching accessory or ground wires for a clean appearance. Sold in pairs.

Kits have everything needed to connect a top post style battery to starter and include fine stranded, rope-lay copper cable for best current carrying capabilities. Kits are offered with traditional red and black cables or all black cables.

Kits have everything needed to connect a top post style battery to starter and include fine stranded, rope lay copper cable for best current carrying capabilities. Also available, ALL76110, 76112, and 76114 red and black cable kits.

Kits have everything needed to connect a top post style battery to starter and include fine stranded, rope-lay copper cable for best current carrying capabilities. Kits are offered with traditional red and black cables or all black cables.

Kits have everything needed to connect a top post style battery to starter and include fine stranded, rope-lay copper cable for best current carrying capabilities. Kits are offered with traditional red and black cables or all black cables.

Kits have everything needed to connect a top post style battery to starter and include fine stranded, rope lay copper cable for best current carrying capabilities. Also available, ALL76110, 76112, and 76114 red and black cable kits.

Battery Box - Side Mount Window - Aluminum - Natural - XS Power S680 Batteries - Each

Battery Terminal Adapter - Top Post to Side Post - Universal XS Power Batteries - Kit

Battery Terminal Adapter - Ring Terminal to Tall Top Post - Brass - Natural - XS Power Batteries - Kit

Battery Terminal Adapter - Ring Terminal to Short Top Post - Brass - Natural - XS Power Batteries - Kit

Battery Terminal Adapter - 6 mm to 3/8 in Stud - Steel - Zinc - XS Power 12 Volt Batteries - Kit

Quickcar 57-1809 4-Gauge 18 In Ground Cable QuickCar s 4-Gauge Ground Cable uses premium cable to provide a ground from the battery/motor to the chassis. Comes with pre-crimped/heat shrunk 3/8 In gold-plated ring terminals.

Quickcar 57-601 Red Battery Cable Boots Red Battery Cable Boots are a lightweight/efficient way of protecting the main electrical system from an accidental short circuit and protect from most debris that may contact a battery connection. They accommodate up to 2-gauge wire and 1/2 In battery cable power rings. Sold in pairs (2).

Quickcar 57-602 Black Battery Cable Boots B lack Battery Cable Boots are a lightweight/efficient way of protecting the main electrical system from an accidental short circuit and protect from most debris that may contact a battery connection. They accommodate up to 2-gauge wire and 1/2 In battery cable power rings. Sold in pairs (2).

Quickcar 57-604 Battery Cable Boots Battery Cable Boots are a lightweight/efficient way of protecting the main electrical system from an accidental short circuit and protect from most debris that may contact a battery connection, working well with QuickCar pt.# 57-660. They accommodate up to 2-gauge wire and 1/2 In battery cable power rings. Sold in pairs of (1) red and (1) black.

Quickcar 57-607 Battery Terminal Cover Battery Terminal Covers work well with #57-610 battery terminals. Covering battery terminals entirely to help prevent any damage or short circuits. These boots are able to accept uo to 2 AWG wire and 1/2 In eyelets. Sold as a pair of (1) red and (1) black.

Battery Terminal Boot - Top Post Cover - Rubber - Black / Red - Pair

Quickcar 57-540 2 AWG 5/16 In Power Rings These QuickCar Power Rings are designed to fit 2 Gauge Cable and have a 5/16 In eyelet. They create a waterproof wire end (when used with shrink tubing). Sold as a pair of 2.

Quickcar 57-550 2 AWG 3/8 In Power Rings These QuickCar Power Rings are designed to fit 2 Gauge Cable and have a 3/8 In eyelet. They create a waterproof wire end (when used with shrink tubing). Sold as a pair of 2.

Quickcar 57-610 Battery Top Posts, Nickel Plated These QuickCar Battery Terminals are made from solid brass stock and Nickel Plated for optimum conductivity. Top mount terminals allow user to attach battery cables to top mount batteries on the battery posts. Sold as one pair, accepts 5/16 In ring terminals and come with wing-nuts for easily connecting/disconnecting the battery. Works well with #57-607 battery terminal covers.

Quickcar 57-620 Battery Top Posts, Gold Plated These QuickCar Battery Terminals are made from solid brass stock and Gold Plated for optimum conductivity. Top mount terminals allow user to attached battery cables to top mount batteries on the battery posts. Sold as one pair, accepts 5/16 In ring terminals. Works well with #57-627 battery terminal covers.

Battery Terminal - Top Post - Bolt On - Brass - Nickel Plated - Pair

Battery Terminal - Top Post - Solder On - Brass - Nickel Plated - Pair

Quickcar 57-701 Red Battery Charging Post This QuickCar Remote Battery Charger Jumper Post is Red is and meant to be used as the positive (+) connection for charging the battery. This post provides remote access to the battery when installed and wired. Terminals have insulated covers to prevent accidental contact from parts with opposing polarity. Installation may require drilling a 1-1/4 In hole to accommodate the post. The red charging Post accepts a 3/8 In ring terminal and QuickCar offers a black negative (-) charger post, both sold separately.

Quickcar Black Battery Charging Post 57-702 This QuickCar Remote Battery Charger Jumper Post is Black and meant to be used as the negative (-) connection for charging the battery. This post provides remote access to the battery when installed and wired. Terminals have insulated covers to prevent accidental contact from parts with opposing polarity. Installation may require drilling a 1-1/4 In hole to accommodate the post. The black charging Post accepts a 3/8 In ring terminal and QuickCar offers a red positive (+) charger post (57-701), both sold separately.

Quickcar 57-703 Battery Charging Posts These QuickCar Remote Battery Charger Jumper Posts come together as a pair and are red and black, meant to be used as the positive (+) and negative (-) connection for charging the battery. These posts provide remote access to the battery for charging when installed and wired correctly. Posts have insulated covers to prevent accidental contact from parts with opposing polarity. Charging Posts may require drilling 1-1/4 In holes for installation and accept 3/8 In ring terminals for wiring. Additional mounting brackets are sold separately.

Quickcar 57-708 Flat Charge Post Bracket Machined Aluminum bracket is anodized black and provides a mounting place for pt.# 57-703 remote charging posts. Charging posts sold separately, can be purchased as 1 kit (see pt.# 57-718)

Quickcar 57-709 90 Charge Post Bracket Machined Aluminum bracket is anodized black and provides a mounting place for pt.# 57-703 remote charging posts, which are sold separately. Bracket is bent 90 degrees and comes with pre-drilled mounting holes. May be purchased as a whole kit (see pt.# 57-719).

Quickcar 57-1810 2-Gauge 18 In Ground Cable QuickCar s 2-Gauge Ground Cable uses premium cable to provide a ground from the battery/motor to the chassis. Comes with pre-crimped/heat shrunk 3/8 In gold-plated ring terminals.

Quickcar 57-660 Battery Side Posts, Gold Plated These QuickCar Battery Side Posts are machined from solid brass stock and 24K Gold Plated for optimum conductivity. Side mount terminals allow user to attach cable to GM style side mount batteries. Terminals come with hardware needed to attach a 5/16 In eyelet power ring terminal. Long stud collar allows use of multiple or thick power ring connectors. Sold as one pair.

Quickcar 57-700 Black Feed-Through Junction Block This QuickCar Firewall Battery Feed-Thru Stud is used where a 12V-16V power source has to pass through a panel such as a firewall. Designed to be mounted in a 1.275 In hole and comes with all necessary mounting hardware for 5/16 In power ring terminals. Sold each.

Quickcar 57-710 Recessed Male Outlet This QuickCar Male Recessed Power Outlet is designed for a 110 Volt female cord end. When mounted on the race car it can be used to plug into oil tank heaters, engine heaters, etc. Sold each.

Quickcar 57-718 Charging Posts with Flat Bracket QuickCar s brass Battery Charging Posts have the option to come with a black bracket. CNC precut holes for the charging posts and #10 mounting holes for the bracket make installation simple. QuickCar charging posts accept 3/8 In ring terminals and include nuts and locking washers. PVC insulated caps for the Charging Posts prevent accidentally touching a post to the opposite polarity. Hardware for mounting the bracket is not included.

Quickcar 57-719 Charging Posts with 90 Bracket QuickCar s Battery Charging Posts have the option to come with a black anodized aluminum 90 bent bracket. CNC precut holes for the charging posts and 1/4 In mounting holes for the bracket make installation simple. QuickCar charging posts accept 3/8 In ring terminals and include nuts and locking washers. PVC insulated caps for the Charging Posts prevent accidentally touching a post to the opposite polarity. Hardware for mounting the bracket is not included.

Quickcar 57-008 Side Mount 4 AWG Battery Cable Kit Kit includes QuickCars premium 4-AWG battery cable. Included is 15 feet of red cable, 2 feet of black cable, a pair of side mounts to bolt onto the side of a battery, (4) 5/16 ring terminals, (4) 3/8 ring terminals with heat shrink tubing. Sold as one complete kit, all heavy-duty ring terminals come gold plated to provide maximum current and prevent corrosion.

Quickcar 57-009 Top Mount 4 AWG Battery Cable Kit QuickCars premium 4-AWG battery cable kit. Included is 15 feet of red cable, 2 feet of black cable, a pair of nickel-plated top mounts to bolt onto the top of a battery, (4) 5/16 ring terminals, (4) 3/8 ring terminals with heat shrink tubing. Sold as one complete kit, all heavy-duty ring terminals come gold plated to provide maximum current and prevent corrosion.

Quickcar 57-010 Top Mount 2 AWG Battery Cable Kit QuickCars premium 2-AWG battery cable kit. Included is 15 feet of red cable, 2 feet of black cable, a pair of nickel-plated top mounts to bolt onto the top of a battery, (4) 5/16 ring terminals, (4) 3/8 ring terminals with heat shrink tubing. Sold as one complete kit, all heavy-duty ring terminals come gold plated to provide maximum current and prevent corrosion.

Quickcar 57-011 Side Mount 2 AWG Battery Cable Kit QuickCars premium 2-AWG battery cable kit. Included is 15 feet of red cable, 2 feet of black cable, a pair of gold-plated side mounts to bolt onto the side of a battery, (4) 5/16 ring terminals, (4) 3/8 ring terminals with heat shrink tubing. Sold as one complete kit, all heavy-duty ring terminals come gold plated to provide maximum current and prevent corrosion.

Quickcar 57-012 Drag Battery Cable Kit 2 AWG QuickCars premium 2-AWG battery cable kit designed for drag racing. Included is 25 feet of red cable, 8 feet of black cable, 4 nickel-plated top mounts to bolt onto the battery, (7) 5/16 ring terminals, (7) 3/8 ring terminals with heat shrink tubing. Sold as one complete kit, all heavy-duty ring terminals come gold plated to provide maximum current and prevent corrosion.

Quickcar 57-014 Battery Cable Kit with Master Disconnect Switch A combo of both QuickCar s popular Master Disconnect Switch (55-009) and Battery Cable Kit (57-009). QuickCars premium 4-AWG battery cable kit designed for drag racing. Included is 15 feet of red cable, 2 feet of black cable, 2 nickel-plated top mounts to bolt onto the battery, (4) 5/16 ring terminals, (4) 3/8 ring terminals with heat shrink tubing. Sold as one complete kit, all heavy-duty ring terminals come gold plated to provide maximum current and prevent corrosion. Master Disconnect Switch comes with a checkered flag square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals.

Quickcar 57-092 4 AWG Red Cable 125ft Roll This QuickCar Racewire Cable is 4 Gauge and features a Red outer shielding. Ships in one 125 Foot Roll. Racewire is used by many NASCAR Cup teams and chassis builders. It is constructed with very fine stranded wire for high flexibility and superior power flow with insulation capable of withstanding extreme temperatures. Sold a one single spool of 125 Feet.

Quickcar 57-094 4 AWG Black Cable 125ft. Roll This QuickCar Racewire Cable is 4 Gauge and features a Black outer shielding. Ships in one 125 Foot Roll. Racewire is used by many NASCAR Cup teams and chassis builders. It is constructed with very fine stranded wire for high flexibility and superior power flow with insulation capable of withstanding extreme temperatures. Sold a one single spool of 125 Feet.

Quickcar 57-102 2 AWG Red Cable 125 Roll This QuickCar Racewire Cable is 2 Gauge and features a Red outer shielding. Ships in one 125 Foot Roll. Racewire is used by many NASCAR Cup teams and chassis builders. It is constructed with very fine stranded wire for high flexibility and superior power flow with insulation capable of withstanding extreme temperatures. Sold a one single spool of 125 Feet.

Quickcar 57-104 2 AWG Black Cable 125 Roll This QuickCar Racewire Cable is 2 Gauge and features a Black outer shielding. Ships in one 125 Foot Roll. Racewire is used by many NASCAR Cup teams and chassis builders. It is constructed with very fine stranded wire for high flexibility and superior power flow with insulation capable of withstanding extreme temperatures. Sold a one single spool of 125 Feet.

Quickcar 57-1521 Power Cable 2 Gauge Red 15Ft Battery Cable - 2 Gauge - 15 ft - Copper - Red - Each

Quickcar 57-1523 2 AWG Black Battery Cable 15Ft. Battery Cable - 2 Gauge - 15 ft - Copper - Black - Each

Quickcar 57-321 2-Gauge Red Battery Cable 5Ft. QuickCar s red battery cable sold in 5 Ft. length. 2-Gauge cable is perfect for circle track, drag racing, or any battery relocation on a car.

Quickcar 57-323 2-Gauge Black Battery Cable 5Ft. QuickCar s black battery cable sold in 5 Ft. lengths. 2-Gauge cable is perfect for circle track, drag racing, or any battery relocation on a car.

Quickcar 57-341 4-Gauge Red Battery Cable 5Ft. QuickCar s red battery cable sold in 5 Ft. lengths. 4-Gauge cable is perfect for circle track, drag racing, or any battery relocation on a car.

Quickcar 57-343 4-Gauge Black Battery Cable 5Ft. QuickCar s black battery cable sold in 5 Ft. lengths. 4-Gauge cable is perfect for circle track, drag racing, or any battery relocation on a car.

Quickcar 57-1541 4 AWG Red Battery Cable 15Ft Battery Cable - 4 Gauge - 15 ft - Copper - Red - Each

Quickcar 57-1543 4 AWG Battery Cable Black 15Ft Battery Cable - 4 Gauge - 15 ft - Copper - Black - Each

Quickcar 57-520 4-AWG 5/16 In Power Rings These QuickCar Power Rings are designed to fit 4 Gauge Cable and have a 5/16 In eyelet. They create a waterproof wire end (when used with shrink tubing). Sold as a pair of 2.

Quickcar 57-525 4 AWG 1/4 In Power Rings These QuickCar Power Rings are designed to fit 4 Gauge Cable and have a 1/4 In eyelet. They create a waterproof wire end (when used with shrink tubing). Sold as a pair of 2.

Quickcar 57-530 4 AWG 3/8 In Power Rings These QuickCar Power Rings are designed to fit 4 Gauge Cable and have a 3/8 In eyelet. They create a waterproof wire end (when used with shrink tubing). Sold as a pair of 2.

Accessory Plug-In - 110V - Flange Mount - 3-Prong Male Socket - Terminals / Wires Included - Kit