NOSE CONES

Replacement nose cone for Type 1 VW transmissions. This bolts to the end of the trans and the shift selector comes through the end. These are easily broken on offroad cars when the transmission isn't properly strapped into the chassis and the shock loads get transfered into the 2 bolt mount at the front. The mounts will break off leaving the rear to hold everything up
Beetle Type 1: 61-7/72
Ghia: 61-7/72
Type 3: 62-7/72

Nose cone to chassis boot. The is the transmission seal and will keep debris out of the pan around the nose cone. Sold each
Beetle Type 1: 52-1/2-79
Bus Type 2: 60-67
Ghia: 56-74

Type 1 nose cone gasket for your vw beetle
Ghia: 56-74

Replace your worn out shift bushing with this new one. Includes a new brass bushing to tap into the nose cone and a new rubber seal
Beetle: All Years
Transmission Type: All Type 1

Replacement bushing for late transmissions shift selector
Fitment:
Beetle: 69-75
Bus Type 2: 69-75

Replace your worn out shift bushing with this new one. Includes a new brass bushing to tap into the nose conel
Beetle: 61-68
Bus Type 2: 61-67

Replace your worn out shift bushing with this new one. Includes a new brass bushing to tap into the nose cone
NOTE: This is the brass bushing ONLY and does not include the seal. Use seal 001-301-209A
Beetle: 69-79
Bus Type 2: 69-75

This bushing allows you to no use a seal on the early nose cones. Includes a new brass bushing to tap into the nose conel
NOTE: This is the brass bushing ONLY and does not include the seal. Use seal 001-301-227
Beetle: 61-66
Bus Type 2: 61-66

Replacement seal holder. Includes a new brass bushing to tap into the nose conel
Beetle: 67-68
Bus Type 2: 67-68

Replacement nose cone seal. Presses into the brass housing at the end of your nose cone on type 1 applications
Beetle: All years
Transmission Type: All Type 1