PEDAL KITS RaceTrim for Beetle Convertible 1954

Hydraulic pedal assembly with roller pedal 3/4 inches clutch 3/4 inches brake. Recommended for 2 wheel brakes. USE DOT 3 BRAKE FLUID ONLY.

Pedal height: 9 inches
Pedal width: 11 1/4 inches
Bolt pattern: 4 inches x 2 3/8 inches
Fitting size: 1/8th NPT
NOTE: Slave Cylinder Sold Seperate

Overall Length: 12 1/2 inches
Width (At M/C): 4 7/8 inches
Height (At M/C): 5 inches

Hydraulic pedal assembly with roller pedal 5/8 inches clutch 3/4 inches brake. Recommended for 2 wheel brakes. USE DOT 3 BRAKE FLUID ONLY.

Pedal height: 9 inches
Pedal width: 11 1/4 inches
Bolt pattern: 4 inches x 2 3/8 inches
Fitting size: 1/8th NPT
NOTE: Slave Cylinder Sold Seperate

Overall Length: 12 1/2 inches
Width (At M/C): 4 7/8 inches
Height (At M/C): 5 inches

Chrome hydraulic clutch and brake pedals. The threaded holes in the master cylinders are 1/8 NPT. They will require brake line adapters to connect you lines properly. Does not include gas pedal. Note: Slave Cylinder Sold Seperate Clutch: 5/8 Bore Brake: 3/4 Bore Material: Steel

Replacment pedal pad for empi, latest rage, cnc & neal pedal kits. Fits all clutch and brake pedal packages. Made of high quality rubber

Large pedal pad for empi, latest rage and cnc single pedal systems. Replace your worn out pad with a new high quality unit

NOTE: These replace the pads on the larger single pedal units. These will not work on the multi pedal brake kits. Those take the smaller pad.

Race trim dual pedal assembly without throttle pedal, fully polished with aluminum mounting bracket and high square reservoirs with easy fill cap. 3/4 inches clutch - 7/8 inches brake, fitting size is 1/8 inches npt and does require adapters to connect the lines. USE DOT 3 BRAKE FLUID ONLY.
Slave cylinder sold separately

Clutch: 3/4 Bore
Brake: 7/8 Bore
Material: Aluminum

Gas pedals can be pulled back if throttle binds or return spring fails. Side mount pedals are available as standard or roller design for smoother throttle control. Firewall mount pedal is used on race cars with flat or stock type firewalls.

Race trim dual pedal assembly without throttle pedal, fully polished with aluminum mounting bracket and high square reservoirs with easy fill cap. 3/4 inches clutch - 7/8 inches brake, fitting size is 1/8 inches npt and does require adapters to connect the lines. USE DOT 3 BRAKE FLUID ONLY.
Slave cylinder sold separately

Clutch: 3/4 Bore
Brake: 7/8 Bore
Material: Aluminum

Polished Hydraulic pedal assembly with roller pedal 5/8 inches clutch 3/4 inches brake. Recommended for 2 wheel brakes. USE DOT 3 BRAKE FLUID ONLY.

Pedal height: 9 inches
Pedal width: 11 1/4 inches
Bolt pattern: 4 inches x 2 3/8 inches
Fitting size: 1/8th NPT
NOTE: Slave Cylinder Sold Seperate

Overall Length: 12 1/2 inches
Width (At M/C): 4 7/8 inches
Height (At M/C): 5 inches

Hydraulic pedal assembly with roller pedal 3/4 inches clutch 3/4 inches brake. Recommended for 2 wheel brakes. USE DOT 3 BRAKE FLUID ONLY.

Pedal height: 9 inches
Pedal width: 11 1/4 inches
Bolt pattern: 4 inches x 2 3/8 inches
Fitting size: 1/8th NPT
NOTE: Slave Cylinder Sold Seperate

Overall Length: 12 1/2 inches
Width (At M/C): 4 7/8 inches
Height (At M/C): 5 inches

Hydraulic pedal assembly
Brake Master: 3/4
Clutch Master: 5/8
Recommended for 2 wheel brakes. USE DOT 3 BRAKE FLUID ONLY.

Pedal height: 9 inches
Pedal width: 11 1/4 inches
Bolt pattern: 4 inches x 2 3/8 inches
Fitting size: 1/8th NPT
NOTE: Slave Cylinder Sold Seperate

Overall Length: 12 1/2 inches
Width (At M/C): 4 7/8 inches
Height (At M/C): 5 inches

Hydraulic pedal assembly
Brake Master: 3/4
Clutch Master: 5/8
Recommended for 2 wheel brakes. USE DOT 3 BRAKE FLUID ONLY.

Pedal height: 9 inches
Pedal width: 11 1/4 inches
Bolt pattern: 4 inches x 2 3/8 inches
Fitting size: 1/8th NPT
NOTE: Slave Cylinder Sold Seperate

Overall Length: 12 1/2 inches
Width (At M/C): 4 7/8 inches
Height (At M/C): 5 inches

Hydraulic pedal assembly
Brake Master: 7/8
Clutch Master: 3/4
Recommended for 2 wheel brakes. USE DOT 3 BRAKE FLUID ONLY.

Pedal height: 9 inches
Pedal width: 11 1/4 inches
Bolt pattern: 4 inches x 2 3/8 inches
Fitting size: 1/8th NPT
NOTE: Slave Cylinder Sold Seperate

Overall Length: 12 1/2 inches
Width (At M/C): 4 7/8 inches
Height (At M/C): 5 inches