FLYWHEELS for Beetle Convertible 1954

Stock style replacement flywheel manufactured from high grade steel and balanced. Drilled for stock 4 dowell pin pattern. 12-volt 200mm (130 teeth) O-ring style. O-ring part number 311-105-295A sold separatley

Dowels: 4
Size: 200mm
Material: Steel

Lightened flywheel is manufactured from high grade steel and balanced. Lightened to aproximatly 13 lbs. and drilled with the 8 dowell pattern. 12-volt 200mm, O-ring style.

O-ring part number 311-105-295A sold seperatly

Fits all Type 1 Engines
Dowels: 8
Material: Lightened Steel

One piece chromoly construction and offset 8-dowel hole pattern along with a weight of aproximatly 13 lbs.

12-volt 200mm (130 teeth) O-ring style.

O-ring part number 311-105-295A sold separately.

Material: Chromoly
Diameter: 200mm
Lightened: Yes

Arp bolt set for flanged cranks

Set of 6

One piece chromoly construction and 6 hole bolt pattern along with a weight of aproximatly 13 lbs.

Fot J&G clutches
12-volt 200mm (130 teeth) O-ring style.

O-ring part number 311-105-295A sold separately.

Material: Chromoly
Diameter: 200mm
Lightened: Yes

One piece chromoly construction and 6 hole bolt pattern along with a weight of aproximatly 13 lbs.

Fot J&G clutches
12-volt 200mm (130 teeth) O-ring style.

O-ring part number 311-105-295A sold separately.

Material: Chromoly
Diameter: 200mm
Lightened: Yes

New forged 12 volt 1piece 8 dowel 200mm chromoly flywheel scat chromoly 12.5 lbs

Size: 200mm
Dowel: 8
Material: Chromoly

10 pack of the 8 dowel flywheel to crank gaskets.

Will also work on 4 dowel

Hole Size: 8mm
Material: Paper
Quantity: 10 Pieces

Flywheel O-Ring, 1300-1600cc Engines, 311-105-295A is a graphite impregnated o-ring which installs in the groove depression in the flywheel where it mates to the crankshaft.

Replace this if you are replacing the crankshaft front main seal

Engine: All VW Aircooled
Material: Rubber
Quantity: Sold Each

Type 4 flywheel o-ring
Replace this if you are replacing the crankshaft front main seal

Engine:Type 4 1700-2000
Material: Rubber
Quantity: Sold Each

Use these shims to set proper end play on vw crank shafts. You will need a variety of sizes to get your desired end play

Engine: 1300cc-1600cc VW
Thickness: .24mm .00094 inches
Quantity: Sold Each

Use these shims to set proper end play on vw crank shafts. You will need a variety of these shims when trying to get the correct end play

Engine: 1300cc-1600cc VW
Thickness: .30mm .0118 inches
Quantity: Sold Each

Use these shims to set proper end play on vw crank shafts. You will need a variety of these shims to get your desired end play

Engine: 1300cc-1600cc VW
Thickness: .32mm .0126 inches
Quantity: Sold Each

Use these shims to set proper end play on vw crank shafts. You will need a variety of these shims to get your desired end play

Engine: 1300cc-1600cc
Thickness: .34mm .013 inches
Quantity: Sold Each

Use these shims to set proper end play on vw crank shafts. You will need a variety of these shims to get your desired end play

Engine: 1300cc-1600cc VW
Thickness: .36mm .0142 inches
Quantity: Sold Each.

Use these shims to set proper end play on vw crank shafts. You will need a variety of these shims to get your desired end play

Engine: 1300cc-1600cc VW
Thickness: .38mm .0142 inches
Quantity: Sold Each.