STEEL BRAKE LINES For VW for Beetle Convertible 1957

Replace all your brake lines with this brake line kit. For 56-66 Beetle. All the hard lines for a complete redo.
Type 1 56-66
111-698-700
Beetle Type 1: 56-66
Pieces: 7
Ends: Metric 10mm Bubble Flare

Complete metal brake line kit for your 67-68 vw beetle. Why guess at all the sizes or try to flare your own lines when you can get this ready to go kit
Beetle Type 1: 67-68
Line Type: Metric Bubble Flare

Steel Brake Line Kit, 1968-78 Standard Beetle and Ghia, 7 Piece Kit,113-698-723 or 131-698-700 all the steel brake lines you need to replace those rusty old brake lines.
This kit fits Type 1s with Ball Joint Front and IRS rear suspensions
Line Type: Metric Bubble Flare

11 Piece brake line kit for your 71-79 type 1 Super Beetle
Metric 10mm Bubble Flair.
Super Beetle: Type 1: 71-79
Quantity: 11 Pieces

7 Piece Stainless Steel brake line kit for your 58-66 type 1 vw
Metric 10mm Bubble Flair
Beetle: Type 1: 58-66
Quantity: 7 Pieces

7 Piece Stainless Steel brake line kit for your 67-68 type 1 vw
Beetle: Type 1: 67-68
Quantity: 7 Pieces

7 Piece Stainless Steel brake line kit for your 69-78 type 1 vw
Beetle: Type 1: 69-78
Quantity: 7 Pieces

11 Piece Stainless Steel brake line kit for your 71-79 type 1 Super Beetle
Quantity: 11 Pieces

Replace all your brake lines with this brake line kit. For Bus 56-67. All the hard lines for a complete redo.
Bus Type 2: 56-67
Ends: Metric 10mm Bubble Flare

Stainless Steel
Replace all your brake lines with this brake line kit. For Bus 56-67. All the hard lines for a complete redo.
Ends: Metric 10mm Bubble Flare

Metric bubble flare brake line. 2794mm long with ends
Bus Type 2: 50-70

Stainless Steel Metric bubble flare brake line. 2794mm long with ends
Bus Type 2: 50-70

Stainless Metric bubble flare brake line. 2180mm (85.8 inches ) long with ends
Ghia: 56-74

Metric bubble flare brake line. 2180mm (85.8 inches ) long with ends
Ghia: 56-74

7.50 inches long metric brake line. Can be used for replacement or repair
Length: 7.50 inches
Quantity: Sold Each

Metal Brake Line, 7.9 inches (200mm), Master Cylinder to Left Front Brake Hose, 1953-66 Type 1
Length: 200mm 7.9 in
Beetle Type 1: 53-66
Line Type: Metric Bubble Flare

8 inches long metric brake line. Can be used for replacement or repair
Length: 8 inches
Quantity: Sold Each

Metal Brake Line, 9.5 inches (241mm), Master Cylinder to Left Front Brake Hose,
FITMENT
1967-77 Standard Beetle, Karmann Ghia, and THING
Length: 241mm
Line Type: Metric Bubble Flare

10.25 inches long metric brake line. Can be used for replacement or repair
Length: 10.25 inches
Quantity: Sold Each

12 inches long metric brake line. Can be used for replacement or repair
Length: 12 inches
Fitting: 10mm x 1.0 Bubble
Quantity: Sold Each

13 inches long metric brake line. Can be used for replacement or repair
Length: 13 inches
Quantity: Sold Each

Metal Brake Line, 15.25 inches (400mm),
Master Cylinder to Right Front Brake Hose, 1953-66 Type 1
Length: 450mm
Beetle Type 1: 50-66
Line Type: Metric Bubble Flare

25 inches long metric brake line. Can be used for replacement or repair
Length: 25 inches
Quantity: Sold Each

17 inches long metric brake line. Can be used for replacement or repair
Length: 17 inches
Quantity: Sold Each

20 inches long metric brake line. Can be used for replacement or repair
Length: 20 inches
Quantity: Sold Each

22 inches long metric brake line. Can be used for replacement or repair
Length: 22 inches
Quantity: Sold Each

28 inches long metric brake line. Can be used for replacement or repair. Sold each. The is intended for the left front side of vw type 2 bus but can work anywere this length is needed
Location: Left Front
Length: 28 inches 720mm

31 inches long metric brake line. Can be used for replacement or repair
Length: 31 inches
Quantity: Sold Each

304 Grade stainless steel line has been double annealed for easier bending and flaring. Pre-made lines exceed SAE and DOT requirements and include standard size stainless flare nuts for years of service and show quality finish. 3/16 In Line With 3/8 In-24 Ends

Two-piece aluminum line clamps secure wiring or hard line providing a finished look. Clamps include stainless steel fasteners and lock nuts or may be installed in pre-threaded holes for hard to reach areas. Package of 4.

Steel brake line is available in lengths from 8 In to 72 In for plumbing brake systems. Standard galvanized zinc coating. 3/16 In Line With 3/8 In-24 Ends

304 Grade stainless steel line has been double annealed for easier bending and flaring. Pre-made lines exceed SAE and DOT requirements and include standard size stainless flare nuts for years of service and show quality finish. 3/16 In Line With 3/8 In-24 Ends

Steel brake line is available in lengths from 8 In to 72 In for plumbing brake systems. Standard galvanized zinc coating. 3/16 In Line With 3/8 In-24 Ends

Steel brake line is available in lengths from 8 In to 72 In for plumbing brake systems. Standard galvanized zinc coating. 3/16 In Line With 3/8 In-24 Ends

304 Grade stainless steel line has been double annealed for easier bending and flaring. Pre-made lines exceed SAE and DOT requirements and include standard size stainless flare nuts for years of service and show quality finish 3/16 In Line With 3/8 In-24 Ends

304 Grade stainless steel line has been double annealed for easier bending and flaring. Pre-made lines exceed SAE and DOT requirements and include standard size stainless flare nuts for years of service and show quality finish 3/16 In Line With 3/8 In-24 Ends

49 inches long metric brake line. Can be used for replacement or repair
Length: 49 inches
Quantity: Sold Each

Black nylon clamps have a 3/16 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Black nylon clamps have a 3/16 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Two-piece aluminum line clamps secure wiring or hard line providing a finished look. Clamps include stainless steel fasteners and lock nuts or may be installed in pre-threaded holes for hard to reach areas. Package of 4.

These polished stainless steel clamps puts the finishing touch on those clutch and brake line installations.
Fits 1/4 inches line. Set of 4
Line Size: 1/4 inches
Quantity: 4 Pieces

These polished stainless steel clamps puts the finishing touch on those clutch and brake line installations.
Fits 3/16 inches line.
Line Size: 3-16 inches
Quantity: 4 Pieces

Use this billet bracket to attach your brake line to a 3/4 inches tube.
This bracket adds a secure and custom look to your brake system.
Clamp will hold 10mm and 3/16 inches brake line
Tubing Size: 3/4 inches
Line Size: 3/16 inches
Quantity: Sold Each

Use this billet bracket to attach your brake line to a 1 inches tube.
Adds a secure and custom look to your brake system.
Tubing Size: 1 inches
Quantity: Sold Each

Use this billet bracket to attach your brake line to a 1 inches tube.
Quantity: Sold Each

Use this billet bracket to attach your brake line to a 1-1/4 inches tube.
Adds a secure and custom look to your brake system....
Quantity: Sold Each

Use this billet bracket to attach your brake line to a 1-1/4 inches tube.
Will hold both 3/16 inches SAE as well as 10mm x 1.0
Tubing Size: 1-1/4 inches
Quantity: Sold Each

Use this billet bracket to attach your brake line to a 1-1/2 inches tube.
Line Size: 3/16 inches SAE
Quantity: Sold Each

Use this billet bracket to attach your brake line to a 1-1/2 inches tube.
Tubing Size: 1-1/2 inches
Quantity: Sold Each

Use this billet bracket to attach your brake line to a stock swing axle tube.
Adds a secure and custom look to your brake system.
Tube Size: Swing Axle Tube
Quantity: Sold Each