FUEL REGULATORS for Beetle Convertible 1967

Chrome fuel pressure regulator with 1/8 inch NPT hose fittings. Use this unit to restrict fuel flow to your carbs. Most electric pumps can pump more fuel then your carbs need. Use this simple screw designed regulator to cut it back



Fuel Pressure Range: 1.5 to 8.5 PSI

Fitting Size: 1/8 inch NPT

Adjustment Type: Screw

This high quality adjustable unit provides the correct fuel pressure your engine set-up demands. A must for all weber carb settings. Recommend using 1538 mounting bracket, sold separately

Pressure High: 7 lb
Pressure Low: 1 lb
Adjustment Type: Dial

Holley low pressure regulator

Mounting bracket for part number 1540 fuel pressure regulator

EMPI's Chrome VW Fuel Pressure Regulator Mounting Bracket is designed to accommodate both 2- and 3-bolt mounted fuel pressure regulators.

The bracket comes with all hardware needed to mount the regulator to the bracket and it to the car.

Straight barbed fittings which complete the installation of either our fuel pressure regulator or our electric fuel pump. Uses 1/4 inches line

Gauges are 1-1/2 In diameter with stainless steel cases and bezels. Available glycerin-filled, dry, or engine turned with brass internal parts and 1/8 InNPT connections on back.

Place regulator between fuel pump and carburetor to regulate fuel pressure when using mechanical and electric performance fuel pumps. Two piece aluminum body has a single 3/8 InNPT inlet port on the bottom and two 3/8 InNPT side outlet ports. InDead Head In style regulator does not require a return line back to fuel tank or cell. 1/8 In NPT port for mounting a fuel pressure gauge or sender line. Regulator also includes steel mounting bracket.

Quickcar 61-300 Fuel Pressure Isolator Specialized isolator eliminates the hazards associated with driver s compartment mounted fuel pressure gauges. Typically mounted to the engine side firewall, isolator is plumbed with the pressure source on the inlet side and a water & antifreeze 50/50 mix on the opposing drivers side connecting to the gauge. Compatible with gasoline, alcohol, or methanol fuels, isolator is manufactured from black anodized 6061-t6 aluminum. Capable of monitoring up to 80 PSI, unit is sold complete with -4AN adapter fittings, mounting bracket, and installation hardware.