BRAKE ROTORS for Beetle Convertible 1968

Use this hub to bolt on 5 bolt vw pattern rims to a king pin spindle.

Use this when front brakes are not required.

Made out of billet aluminum for high strength.

Uses stock king pin bearings and sealsl

Sold each

Spindle: King Pin
Bolt Pattern: 5 on 205mm
Quantity: Sold Each

Use this hub to bolt on 5 bolt vw pattern rims to a combo spindle.

Use this when front brakes are not required.

Made out of billet aluminum for high strength.

NOTE: These will not fit any other spindle. These will not fit king pin or ball joint.

Sold each

Spindle: Combo Spindle
Bolt Pattern: 5 on 205mm
Quantity: Sold Each

Replacement front rotor for kit number 22-2880-0. Fits king pin thru 65.

Vented for cooling and cleaning.
NOTE: All bearings must be pressed in.

Diameter: 11-1/16 inches
Suspension: King Pin
Bolt Pattern: 5 on 205mm

High strength steel brake rotor for 5/205, ball joint 66 on.

Sold each

Diameter: 10-7/8 inches
Spindle Type: Ball Joint
Pattern: 5 on 205mm

Convert your Porsche 356 from drum to disc brakes with our conversion rotors.

5 on 205mm Pattern
14mm x 1.5mm threaded holes.

Sold Each

NOTE: These kits will only work with stock style, drum brake spindles.

Replacement king pin brake rotor. This is the rotor we use in all our 4 bolt economy brake kits.

If using on a king pin front end, the king pin conversion bearings must be used. If using on a ball joint front end, stock ball joint bearings will work.

Vw 4 Lug X 130mm Bolt Pattern With 14mm X 1.5 Lug Bolt Holes

OEM NUMBER: 113-407-075

Diameter: 11 inches
Front End: King Pin & Ball Joint
Bolt Pattern: 4 on 130mm VW

Replacement brake rotor 4 on 130 pattern.

Works on swing axle, thru 68 (short spline) and also can be used on irs 68 and up with the use of spacer number 22-5281-7.

OEM NUMBER:
113-615-601S

Diameter: 11 inches
Depth: 3-1/2 inches
Pattern: 4 on 130mm

Rear long spline hubs for type 3. Also used if brakes are not needed.

Sold each

Type 3 VW: 66-74
Bolt Patter: 4 on 130mm
Quantity: Sold Each

High quality front brake rotor for 71-72 Type 2 Bus

High quality front brake rotor for 73-79 Type 2 Bus or disc brake conversion for 68-79 Bus

Front hub assembly for replacement for 71-79 bus or disc brake conversion for 68-79 BUS

Bus Type 2: 71-79
Bus Conversion: 68-79

Grade 8 socket head 8x20mm bolt for rotor to hub. Replacement for 73-79 or for disc brake conversion 68-79.

Replacement spacer for IRS rotor, sold each.

This spacer conversts swing axle rotors to fit the long spline IRS

Rear End: Swing Axle to IRS
Thickness: 5/8 inches
Quantity: Sold Each

Required on front disc brake kits this bearing and seal kit comes with everythng required to mount hubs onto your spindle.

Includes:
2 Inner Bearing
2 Outer Bearings
2 Seals

Front Beam: Ball Joint
Beetle Type 1: 66-74
Quantity: 6 Pieces

Replacement brake rotor, no holes.

Works on swing axle, thru 68 (short spline) and also can be used on irs 68 and up with the use of spacer number 22-5281-7

Diameter: 11 inches
Depth: 3-1/2 inches
Pattern: None, no holes

Replacement brake rotor 4 on 130 pattern.
Rear Right, Drilled and Slotted, 11” Dia., 4 1/8” Depth
14x1.5mm Mounting Holes

Works on swing axle, thru 68 (short spline) and also can be used on irs 68 and up with the use of spacer number 22-5281-7.



Diameter: 11 inches
Depth: 3-1/2 inches
Pattern: 4 on 130mm

Replacement brake rotor 4 on 130 pattern.
Rear Left, Drilled and Slotted, 11” Dia., 4 1/8” Depth
14x1.5mm Mounting Holes

Works on swing axle, thru 68 (short spline) and also can be used on irs 68 and up with the use of spacer number 22-5281-7.



Diameter: 11 inches
Depth: 3-1/2 inches
Pattern: 4 on 130mm

feature a cross drilled and slotted design along with zinc plating to resist corrosion. Double drilled for the Porsche 5x130mm pattern or Chevy 5x4.75

Fits Long spline IRS and Swing Axle

feature a cross drilled and slotted design along with zinc plating to resist corrosion. Double drilled for the Porsche 5x130mm pattern or Chevy 5x4.75

Fits Long spline IRS and Swing Axle