FRONT DISC BRAKE KITS for Beetle Sedan 1957

These brake kits for vw king pin front ends allow the easy installation of newer disc style brakes on your old aircooled vw. This kit uses ball joint rotors with a special bearing to adapt them to king pin.
NOTE: BEARINGS MUST BE PRESSED INTO THE ROTOR
Caliper: 2 Piston

ZERO OFFSET WIDE 5 KITS
This special brake rotor and caliper kit creates a near zero offset so you won't lose any tire to fender clearance.
The most complete front 5 bolt kit available.
-5 bolt brake rotors
-special brackets
-wheel bearings & seals,
-brake lines and a new master cylinder.
NOTE:
Must use stock style drum brake spindles.
Must Use 15 inches Rims
Fits to 65
Bolt Pattern: 5 on 205mm VW
Beetle Type 1: 59-65

These brake kits for vw king pin front ends allow the easy installation of newer disc style brakes on your old aircooled vw. This kit uses special made chevy pattern rotors with a special bearing to adapt them to king pin.

-2 spindle nuts
-2 inner bearings
-2 outer bearings
-2 seals
-2 spacers.
NOTE: BEARINGS MUST BE PRESSED INTO THE ROTORS
Pattern: 5 on 4-3/4
Caliper: 2 Piston
NOTE: THESE TAKE A BALL JOINT STYLE DUST CAP ARE ARE NOT INCLUDED

Front disc brake kit 4 on 130 for ball joint ends.
The stopping power of safety of disc brakes in a bolt-on kit.
INCLUDES:
-Calipers
-Rotors
-Backing plates
-Spindles.
PLEASE READ: You must purchase bearings and seals 22-2851-0
NOTE: Must use with 15 inches diameter wheels
Bolt Pattern: 4 on 130mm VW
Beetle Type 1: 68-77

ZERO OFFSET WIDE 5 KITS
66-67, 5/205
a special rotor and caliper mount bracket combined to give you a premium disc brake upgrade using your existing front spindles.
Now you can have the stopping power of disc brakes and have the early 5 on 205 rim of your choice, and no adapters!
-5 Bolt Rotors
-Dual Master cylinder
-Brake lines
-Floating calipers & pads
-Wheel bearings
-Grease seals and all necessary hardware
NOTE: Will not work with drop spindles. Must use stock style drum brake spindles.
Caliper guide pins pre-installed
Bolt Pattern: 5 on 205
Beetle Type 1: 66-67

ZERO OFFSET WIDE 5 VW KIT
Now you can have the stopping power of disc brakes and have the early 5 on 205 rim of your choice, and no adapters! Zero offsets help maintain tire clearance.
-Master cylinder
-Floating calipers & Brake pads
-Wheel bearings grease seals and all necessary hardware.
Caliper guide pins pre-installed.
Beetle Type 1: 68-74

Vented Rotor Kit
Beetle Type 1: 59-65

The stopping power and safety of disc brakes in a bolt on kit.
Includes
Mounting Brackets
Calipers & Pads
Rotors
Brake Lines 10 inches
USE 22-2851-0 BEARING KIT SOLD SEPERATELY
NOTE: Must use 15 inches Wheels
Lug holes are drilled 14x1.5mm
Front Beam: Super Beetle
Super Beetle Type 1: All Years

Wilwood disc brake kit with Silver billet wilwood calipers and vented rotors.
Brake Lines
Super Beetle Type 1: All Years

Super Beetle Front Brake Kit
The stopping power and safety of disc brakes in a bolt on kit.
Brake Like 10 inches
Lug holes are drilled 14x1.5mm & 12mm for Chevy Pattern
Super Beetle Type 1: All Years

Converting your 1968 and later from drum to disc has never been easier. No need to replace spindles. Easy to bolt on kit comes complete with everything you need.
Double drilled rotors for both 5-130mm pattern and 5 on 4.75 chevy pattern
Thread Size: 12mm 1.5

Vented Rotor Kit
These brake kits for vw king pin front ends allow the easy installation of newer disc style brakes on your old aircooled vw. This kit uses special made chevy pattern rotors with a special bearing to adapt them to king pin.
NOTE: THESE TAKE A BALL JOINT STYLE DUST CAP ARE ARE NOT INCLUDED

Converting your 1968 and later from drum to disc has never been easier. No need to replace spindles. Easy to bolt on kit comes complete with everything you need.
Does not include bearings or seals
Thread Size: 14mm 1.5

Vented Rotor Kit
Front disc brake kit 4 on 130 for ball joint ends.
Beetle Type 1: 68-77

2.5 inch drop spindle kit. Wilwood disc brake kit with billet wilwood calipers and vented rotors.
Drop Spingles
Beetle Type 1: 66-79

2.5 inch drop spindle kit. BLACK Wilwood disc brake kit with billet wilwood calipers and vented rotors.
Beetle Type 1: 66-79

2.5 inch drop spindle kit. RED Wilwood disc brake kit with billet wilwood calipers and vented rotors.
Beetle Type 1: 66-79

Front disc brake kit 5 on 4-3/4 for ball joint front ends.
PLEASE READ: You must purchase bearings and seals for a 66-68 Type 1. They are not included
Beetle Type 1: 66-74

Drop spindle brake kit. Drop your front stance 2-1/2 inches and add the benefits of disc brakes all in one package.
-4 Bolt rotors
-Wheel bearings, seals and hardware.
-Brake hoses
-Grease caps
-Thrust washers
-Spindle nuts
Spindles are offset 1/4 inches which widens your track a total of about 5/8 inches
Beetle Type 1: 59-65

Vented Brake Kit
Beetle Type 1: 66-74

2 1/2 inches inches drop spindle kit. A dropped front stance and classic 5/205 wheels combined with modern brake technology. Requires the use of 1966 and later Ball Joint dust caps.
-Spindles
-Brake Hoses
-Bearings & grease seals
-Cllamp nuts and hardware.
Note:
Widens your track roughly 5/8 inches total.
These spindles not sold separately
Beetle Type 1: 59-65
NOTE: Does not include dust caps

2.5 inch drop spindle kit. SILVER Wilwood disc brake kit with billet wilwood calipers and vented rotors.
Bolt Pattern:Chevy & 5 on 130
Beetle Type 1: 66-79

2.5 inch drop spindle kit. BLACK Wilwood disc brake kit with billet wilwood calipers and vented rotors.
Beetle Type 1: 66-79

Drop spindle brake kit. Drop your front stance 2-1/2 inches and add the benefits of disc brakes all in one package.
Must use 69 and later ball joint tie rods ends.
Beetle Type 1: 66-74

Vented Rotor Kit
Drop spindle brake kit. Drop your front stance 2-1/2 inches and add the benefits of disc brakes all in one package.
Beetle Type 1: 66-74

Wilwood Chevy 5 on 4-3/4 and 5/130 pattern
Complete kit includes:
High Performance Wilwood Calipers / Black
Caliper Bolts

Wilwood Chevy 5 on 4-3/4 and 5/130 pattern
High Performance Wilwood Calipers /Red
Caliper Bolts

Drop spindle brake kit. Drop your front stance 2-1/2 inches and add the benefits of disc brakes all in one package.
Beetle Type 1: 66-74

Drop spindle brake kit. Drop your front stance 2-1/2 inches and add the benefits of disc brakes all in one package.
-Chevy 5 on 4-3/4 Bolt pattern rotors
Bolt Pattern: 5 on 4-3/4 Chevy
Beetle Type 1: 59-65

Front Disc Brake Kit For Bus.

Front Disc Brake Kit For Bus.

Convert your Porsche 356 from drum to disc brakes with our disc brake conversion kit. Featuring heavy duty brackets that bolt directly onto your stock spindle, then calipers to the brackets. The kit comes complete with rotors, calipers, brackets, master cylinder, bearings, seals, brake pads, and hoses. These kits will only work with stock style drum brake spindles.

For 2 inches inches hollow spindles
utilizes the best of the best in both components and materials used. 4 piston calipers and pads, 5/205 bolt pattern. Polished aluminum center caps. Bearing races are pressed into hubs.
Spindle Type: 2 inches Hollow
Calipers: 4 Piston

Front Disc Brake Kit For Bus. 68-69
Kits are supplied with virtually everything needed to convert the front brakes on your Type 2 disc to brakes. See instructions (P/N 99-4439-0) supplied in the brake kit for details including the change in the vehicles track width. These kits will not work with P/N 22-2948 EMPI Drop Spindles. See our website for complete detailed instructions.

ZERO OFFSET WIDE 5 VW KIT
Includes Spindles.
Beetle Type 1: 68-74

Disc Brake Conversion Kit engineered in partnership with Wilwood for maximum stopping power and easy bolt on installation. This kit features Wilwood calipers and brake pads. Comes in Red (P/N: 22-6149-R), Black (P/N: 22-6149-B) or Silver (22-6149-0).
Complete Kit Includes:
High Performance Wilwood Calipers
High Performance Wilwood Brake Pads
SKF Bearings
Caliper Bolts
Double-Drilled 5x130 with 14x1.5mm threads/5x4.75 with 12mm threads
Brake Lines & Dust Caps

Disc Brake Conversion Kit engineered in partnership with Wilwood for maximum stopping power and easy bolt on installation. This kit features Wilwood calipers and brake pads. Comes in Red (P/N: 22-6149-R), Black (P/N: 22-6149-B) or Silver (22-6149-0).
Brake Lines & Dust Caps
Brake Lines & Dust Caps

feature a cross drilled and slotted design along with zinc plating to resist corrosion. Double drilled for the Porsche 5x130mm pattern or Chevy 5x4.75
Fits Ball Joint Spindles

feature a cross drilled and slotted design along with zinc plating to resist corrosion. Double drilled for the Porsche 5x130mm pattern or Chevy 5x4.75
Fits Ball Joint Spindles

Add the benefits of disc brakes all in one package. Kit includes: Double Drilled Brake Discs with 5x130 Bolt Pattern and 14x1.5mm Threaded Bolt Holes 5/4.75 Bolt Pattern and 12x1.5mm Threaded Bolt Holes Calipers Pads Wheel Bearings and Seals Hardware Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetle

Add the benefits of disc brakes all in one package. Kit includes: Brake Discs with 4/130 Bolt Pattern w/ 14x1.5mm Threaded Bolt Holes Calipers Pads Wheel Bearings and Seals Hardware Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetle NOTE: Your spindle must be setup for disc brakes.

Classic 5/205 wheels combined with modern brake technology. Thats what youll get with EMPIs 5/205 brake kit. Kit includes: Double Drilled Discs with 5x130 Bolt Pattern and 14x1.5mm Threaded Bolt Holes 5x205 Bolt Pattern and 12x1.5mm Threaded Bolt Holes Calipers Pads Brake Hoses Wheel Bearings and Seals Clamp Nuts and Hardware This kit may widen your track about 5/8. Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetle NOTE: Your spindle must be setup for disc brakes.

The stopping power and safety of Disc Brakes in a bolt-on kit! Add the benefits of disc brakes all in one package. Kit includes: Brake Discs with 4/130 Bolt Pattern w/ 14x1.5mm Threaded Bolt Holes Calipers Pads Backing Plates Hardware Use with Wheel Bearing Kit 22-2851-0 Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetles w/o Holes. NOTE: Your spindle must be setup for disc brakes.

The stopping power and safety of Disc Brakes in a bolt-on kit! Converting your 1966 Thru 1977 VW Bug Or Ghia from Drum to Disc Brakes is made simple with this conversion kit. Kit includes: Double Drilled Brake Discs with 5x130 Bolt Pattern and 14x1.5mm Threaded Bolt Holes 5/4.75 Bolt Pattern and 12x1.5mm Threaded Bolt Holes Calipers Pads Backing Plates Hardware Use with Wheel Bearing Kit 22-2851-0 Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetle NOTE: Your spindle must be setup for disc brakes.

Add the benefits of disc brakes all in one package. Kit includes: Drilled and Slotted Brake Discs with 4/130 Bolt Pattern w/ 14x1.5mm Threaded Bolt Holes Calipers Pads Backing Plates Dust Caps and Hardware Use with Wheel Bearing Kit 22-2851-0 Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetle NOTE: Your spindle must be setup for disc brakes.

Kit includes: Drilled Brake Discs with 4/130 Bolt Pattern w/ 14x1.5mm Threaded Bolt Holes High Performance Wilwood Calipers / Silver High Performance Wilwood Brake Pads Wheel Bearings and Seals Dust Caps and Hardware Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetles NOTE: Your spindle must be setup for disc brakes.

Kit includes: Drilled Brake Discs with 4/130 Bolt Pattern w/ 14x1.5mm Threaded Bolt Holes High Performance Wilwood Calipers / Black High Performance Wilwood Brake Pads Wheel Bearings and Seals Dust Caps and Hardware Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetles NOTE: Your spindle must be setup for disc brakes.

Kit includes: Drilled Brake Discs with 4/130 Bolt Pattern w/ 14x1.5mm Threaded Bolt Holes High Performance Wilwood Calipers / Red High Performance Wilwood Brake Pads Wheel Bearings and Seals Dust Caps and Hardware Requires 69 and Later Style Tie Rod Ends. Must use with minimum 15 wheels. Fits 1966-1977 Standard Beetles NOTE: Your spindle must be setup for disc brakes.