BODY TRIM & MOLDING KITS for Beetle Sedan 1958

The EMPI Aluminum Door Handle Guards install behind the door handles in 1968 through 1970 VW Beetles. The door handle guards help protect the cup behind the handle from getting scratched by finger nails and fingers reaching in to open the door and are sold as a pair.
Beetle Type 1: 68-70
Quantity: 2 Pieces

The EMPI Aluminum Door Handle Guards install behind the door handles in 1971 through 1977 VW Standard Beetles and 1971 through 1979 Super Beetles. The door handle guards help protect the cup behind the handle from getting scratched by finger nails and fingers reaching in to open the door and are sold as a pair.

Sunroof crank handle
Grey
Beetle Type 1: 68-77

The EMPI Stainless Steel Door Handle Guards install behind the door handles in 1956 through 1959 VW Beetles. The door handle guards help protect the cup behind the handle from getting scratched by finger nails and fingers reaching in to open the door and are sold as a pair. As the early handles do not have a front mount, a dab of silicone at the front edge can help in securing the guards to the door.

The EMPI Stainless Steel Door Handle Guards install behind the door handles in 1960 through 1967 VW Beetles. The door handle guards help protect the cup behind the handle from getting scratched by finger nails and fingers reaching in to open the door and are sold as a pair.

The EMPI Stainless Steel Door Handle Guards install behind the door handles in 1968 through 1970 VW Beetles. The door handle guards help protect the cup behind the handle from getting scratched by finger nails and fingers reaching in to open the door and are sold as a pair.

The EMPI Stainless Steel Hood Handle Guard installs behind the hood handle on 1968 through 1977 VW Standard Beetles and 1971 through 1979 Super Beetles. The hood handle guard helps protect the paint next to the handle from getting scratched by finger nails and fingers reaching in to open up the hood. A gasket is included to help prevent the guard from scratching the paint.

The EMPI Stainless Steel Hood Handle Guard installs behind the hood handle on 1954 through 1967 VW Beetles. The hood handle guard helps protect the paint next to the handle from getting scratched by finger nails and fingers reaching in to open up the hood. A gasket is included to help prevent the guard from scratching the paint.
Beetle Type 1: 56-67
Quantity: Sold Each

Stainless steel vent shades and rain deflectors allow you to roll down your window slightly without the effects of rain and wind.
Fits type 1, 53-64. Sold as a pair
Easy to install, they are held in place with the two trim screws that secure the outside scraper trim. All you need to do is remove the screw, match the hole in the shade up with the hole in the trim piece, and re-thread it back into place.

Stainless steel vent shades and rain deflectors allow you to roll down your window slightly without the effects of rain and wind.
Fits type 1, 65-77. Sold as a pair
Easy to install, they are held in place with the two trim screws that secure the outside scraper trim. All you need to do is remove the screw, match the hole in the shade up with the hole in the trim piece, and re-thread it back into place.

Stainless steel vent shades and rain deflectors allow you to roll down your windows slightly without the effects of wind and rain
Fits Bus 68-79, Sold as Pair
Easy to install, they are held in place with the two trim screws that secure the outside scraper trim. All you need to do is remove the screw, match the hole in the shade up with the hole in the trim piece, and re-thread it back into place.

2 piece grille set, aluminum, type 1

4 piece grille set, aluminum, type 1

Front hood grille, aluminum for type 1, 68-77, 71-72 super beetle. Polished custom look

Mirror finished chromed plastic vent grills for your 71 and later beetle
Type 1, 71-on, pair.
Beetle Type 1: 71 & Up
Quantity: Sold as a Pair

Type 1, 71-on, pair.
113-819-447A/8A

Rear air intake grille, aluminum. Fits type 1 72-77

Replace those old and dull moldings with our high quality bright anodized aluminum 7 piece molding kits. Fits type 1, except super beetle.
111-898-111
Quantity: 7 Pieces

REPLACE THOSE OLD AND DULL MOLDINGS WITH OUR HIGH QUALITY BRIGHT ANODIZED ALUMINUM 7 PIECE MOLDING KITS. FITS TYPE 1, EXCEPT SUPER BEETLE.
Quantity: 7 Pieces

REPLACE THOSE OLD AND DULL MOLDINGS WITH OUR HIGH QUALITY Stainless Steel 7 PIECE MOLDING KITS. FITS TYPE 1, EXCEPT SUPER BEETLE.
CLIPS NOT INCLUDED.
111-898-111A
Beetle Type 1: 64-66
Length: 37-1/4 inches Hood Strip
Quantity: 7 Pieces

REPLACE THOSE OLD AND DULL MOLDINGS WITH OUR HIGH QUALITY Stainless Steel 7 PIECE MOLDING KITS. FITS TYPE 1, EXCEPT SUPER BEETLE.
Beetle Type 1: 53-62
Quantity: 7 Pieces

REPLACE THOSE OLD AND DULL MOLDINGS WITH OUR HIGH QUALITY BRIGHT ANODIZED STAINLESS MOLDING KITS. FITS TYPE 1, EXCEPT SUPER BEETLE.
Quantity: 7 Pieces

REPLACE THOSE OLD AND DULL MOLDINGS WITH OUR HIGH QUALITY Stainless Steel 7 PIECE MOLDING KITS. FITS TYPE 1, EXCEPT SUPER BEETLE.
Beetle Type 1: 71-78
Quantity: 7 Pieces

REPLACE THOSE OLD AND DULL MOLDINGS WITH OUR HIGH QUALITY Stainless Steel 7 PIECE MOLDING KITS.
Super Beetle Type 1: 71-79
Quantity: 7 Pieces

Replace those old and dull moldings with our high quality Stainless Steel 7 piece molding kits. Fits type 1, except super beetle.
Clips not included.
111-898-111c
Beetle Type 1: 68-72
Length: 36-3/4 inches
Quantity: 7 Pieces

Replace those old and dull moldings with our high quality bright anodized aluminum 7 piece molding kits. Fits type 1, except super beetle.
Quantity: 7 Pieces

EMPI's White Fender Beading is sold as a 25 foot roll and can be used on Beetles, Baja Bugs, Type 3s and Things. The fender beading is not cut or notched for fender bolts allowing for custom fitment as needed. The fender bead or welting has a round bead at the edge and a thin flap that is sandwiched between two body panels to provide a finished edge at the seam.

EMPI's Black Fender Beading is sold as a 25 foot roll and can be used on Beetles, Baja Bugs, Type 3s and Things. The fender beading is not cut or notched for fender bolts allowing for custom fitment as needed. The fender bead or welting has a round bead at the edge and a thin flap that is sandwiched between two body panels to provide a finished edge at the seam.

Black fender beading. 25 feet long. Enough to replace all your beading on your type 1 vw
Special high quality copolymer. It is precision extruded in a new tooling..

With notches for bolts,
finish off your new paint job with new fender beading. This is for 1 fender.
OEM Number: 111-821-715A
Beetle Type 1: All Years

Set of 4
With notches for bolts.
Finish off your new paint job with new fender beading. Available in colors to match or offset your color scheme
Quantity: 4 Pieces

With notches for bolts
finish off your new paint job with new fender beading. Available in colors to match or offset your color scheme

Chome Molding Clip, 1952-66 Beetle. These are the clips which hold the chrome body molding onto your 1952-1966 VW Beetle. They slip into the rubber boot that protects the body from metal to metal contact
These are roughly 5/8 inches long and 50 are required per car.
Pack of 50.
113-853-585B
Type 3: 62-66
Quantity: 50 Pieces

Chome Molding Clip, 1967-79 Beetle. These are the clips which hold the chrome body molding onto your 1967-79 VW Beetle. They slip into the rubber boot that protects the body from metal to metal contact
113-853-585C
Type 3: 67-74
Quantity: 50 Pieces

Convertible 50-64, ghia 56-71, pack of 50. This clip holds the chrome and the rubber strip on the top edge of the doors.
151-898-235

Air vent for your 71-77 type 1 beetle. These will fit both the left and right sides.
Sold Each

Kits include two each: 4 In long x 1/2 In dia. chrome steel pins, chrome steel scuff plates, clips, and four nuts. Available with flip-over or hairpin-style clips.

This is a great idea for hanging your lantern when your out camping. It sits in your rain gutter and will mount on any aircooled beetle, bus or Type 3.

This is a great idea for hanging your lantern when your out camping. It sits in your rain gutter and will mount on any aircooled beetle, bus or Type 3.

This is a great idea for hanging your lantern when your out camping. It sits in your rain gutter and will mount on any aircooled beetle, bus or Type 3.

This is a great idea for hanging your lantern when your out camping. It sits in your rain gutter and will mount on any aircooled beetle, bus or Type 3.