TUBE CONNECTORS for Beetle Sedan 1958

NON INTERLOCKING WITH BOLTS ON SAME SIDE.
Tubing connector for 1-1/2 inches tubing with a .120 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable.. Provides a nice streamline look
Material: Steel

Tubing connector for 1-1/2 inches tubing with a .120 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable.. Provides a nice streamline look. INTERLOCKING WITH BOLTS ON OPPOSITE SIDES.
Material: Steel

Tubing connector for 1-1/2 inches tubing with a .095 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. INTERLOCKING WITH BOLTS ON OPPOSITE SIDES.
Tubing Diameter: 1-1/2 inches
Material: Steel

NON INTERLOCKING
Tubing connector for 1 inches tubing with a .065 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look.
Length: 1.720 inches
Length (center section): 1.056 inches
Diameter: 1 inches .
Diameter (insert section): .854 inches
Tubing Diameter: 1 inches
Tubing Wall Thickness: .065 inches
Material: Steel.

NON INTERLOCKING
Tubing connector for 1 inches tubing with a .095 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look.
Length: 1.707 inches
Length (center section): 1.06 inches
Diameter (insert section): .803 inches
Tubing Wall Thickness: .095 inches
Material: Steel.

NON INTERLOCKING
Tubing connector for 1-1/4 inches tubing with a .095 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look.
Length: 1.70 inches
Length (center section): 1.043 inches
Diameter: 1 1/4 inches .
Diameter (insert section): 1.056 inches
Tubing Diameter: 1-1/4 inches
Material: Steel.

Tubing connector for 1-1/4 inches tubing with a .120 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. NON INTERLOCKING WITH BOLT ON ONE SIDE.
Length: 1.700 inches
Length (center section): 1.050 inches
Diameter: 1.236 inches .
Diameter (insert section): 1 inches
Tubing Wall Thickness: .120 inches
Material: Steel.

Tubing connector for 1-1/2 inches tubing with a .095 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. Made for rhino roll cages.
Material: Steel

Tubing connector for 1-1/2 inches tubing with a .120 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. Made for rhino roll cages.
Material: Steel

Tubing connector for 1-1/2 inches tubing with a .095 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. NON INTERLOCKING WITH BOLTS ON SAME SIDE.
Material: Steel

Tubing connector for 1-3/4 inches tubing with a .095 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. INTERLOCKING WITH BOLTS ON OPPOSITE SIDES.
Tubing Diameter: 1-3/4 inches
Material: Steel

Tubing connector for 1-3/4 inches tubing with a .120 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. Made for rhino roll cages..
Tubing Wall Thickness
Material: Steel

Chromoly Tubing connector for 2 inches tubing with a .120 wall thickness. Makes a super smooth way to fabricate rear cages or anything that needs to be removable. Provides a nice streamline look. INTERLOCKING WITH BOLTS ON OPPOSITE SIDES.
Length: 2 1/2 inches
Length (center section): 1 7/16 inches
Diameter: 2 inches .
Diameter (insert section): 1.750 inches
Tubing Diameter: 2 inches
Material: Chromoly