HEIM JOINTS for Beetle Sedan 1960

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Thread: 7/16 inches -20
Hole Diameter: 7/16 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 1/2 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Thread: 5/8 inches
Hole Diameter: 5/8 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Thread: 3/4 inches
Hole Diameter: 5/8 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 3/4 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 7/16 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 1/2 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 1/2 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 5/8 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 5/8 inches

Endura inches 2000 inches rod ends have increased cross sectional thickness for greater tensile strength. Self-lubricating, self-sealing Teflon/Kevlar bearing races are used
Hole Diameter: 3/4 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chrome plated
Hole Diameter: 1/2 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chrome plated
Hole Diameter: 1/2 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chrome plated
Hole Diameter: 5/8 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chrome plated
Hole Diameter: 3/4 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chrome plated
Hole Diameter: 1/2 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chrome plated
Hole Diameter: 1/2 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chome plated
Hole Diameter: 5/8 inches

PCM Series chrome moly rod end. The ultimate rod end for performance needs. Chrome moly steel, heat-treated body is black oxide coated and delivers the highest load rating of any 2-piece rod end. Balls are made from 52100 bearing steel, machined, heat treated and hard chrome plated
Hole Diameter: 3/4 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 3/8 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 1/2 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 5/8 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 5/8 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 3/4 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 3/8 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 1/2 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 1/2 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 5/8 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 5/8 inches

XM Series chrome moly rod end. Two-piece rod ends feature heat-treated balls and bodies, and increased cross-sectional area for greater tensile strength
Hole Diameter: 3/4 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Thread: 10-3
Hole Diameter: 3/16 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 1/4 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Thread: 5/16 inches -24
Hole Diameter: 5/16 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 3/8 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 7/16 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 5/8 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 3/4 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 3/16 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 1/4 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 5/16 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 3/8 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 7/16 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 1/2 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Thread: 5/8'
Hole Diameter: 5/8 inches

CM Series carbon steel rod end. QA1's two-piece CM Series rod ends are made of 52100 carbon steel, heat treated, hard chrome plated, treated for corrosion resistance and precisely ground
Hole Diameter: 3/4 inches