BAFFLES & MUFFLERS for Beetle Sedan 1960
Items:
1–51 of 51
Sort by:
Recommended
-
Stainless muffler clamps on any 2 inches pipe. Adds a nice tone to your car without a performance loss 2 Inlet 4 Outlet 14 Long
-
HIDEAWAY MUFFLER- FITS P/N:3699 & 7320, WITH J-TUBES
CERAMIC COATED
TYPE 1 ONLY -
Replacement 3 bolt muffler. Single quiet in Ceramic Coated. Fits type 3 vw. Fits out 00-3661-7 header..
Coating: None, Raw Steel -
Replacement dual quiet muffler for the dual quiet exhaust system. Muffler only.. Fits type 1 & ghia, 66-73, type 2 63-71.
Bus Type 2: 63-71 -
Replacement dual quiet muffler, black w/ chrome tips and small 3 bolt flange. Fits type 2, 63-71..
Coating: None, Raw Steel. -
This muffler kit replaces the collector on typical bobcat style exhausts and converts it into a u-bend dual chambered muffler. Comes with collector and muffler. Fits 1-1/2 inches exhaust. Black is for protective purposes only and will burn off once run
Collector Type: U-Bend
Coating: None, Raw Steel -
This is the replacement muffler only, header not included. Replacement dual muffler only for the 00-3602-0 Tuck away Dual system. Black is for storage and not meant to be a finished coating
The EMPI Dual Tuck-Away Muffler fits Standard and Super Beetles, as well as Karmann Ghias with 1300cc to 1600cc based engines. This EMPI VW Muffler is to be used with the header part number 3602-7. The dual glass pack muffler mounts to the flange with the included gaskets and hardware. This exhaust is higher off the ground compared to the standard single or dual quiet pack muffler systems.
Coating: None, Raw Steel -
Replacement dual quiet muffler, black with chrome tips and small 3 bolt flange. Fits type 3.....
Coating: None, Raw Steel. -
These bad phat boys provide maximum flow and power with a distinctive turbo hush. Stainless steel for durability
The EMPI Stainless Steel PHAT Boy Muffler fits 1300cc to 1600cc based engines in Standard and Super Beetles, as well as Karmann Ghias.
This VW Muffler mounts in the 1 o'clock position on a small 3 bolt flange and can be used with J-Tubes or stock heater boxes
Coating: Stainless
Fits: All Premium Extractors -
The phat boy muffler offers great sound, good looks and most of all, performance you can feel. For type 1 standard and merged header exhaust systems.
This VW Muffler can be used with J-Tubes or stock heater boxes
Stainless Steel -
Stainless steel phat boy muffler for the 00-3767-0 extractor..
Comes complete with gasket and hardware
Flange: 1:00 position
Material: Stainless Steel -
These bad phat boys provide maximum flow and power with a distinctive turbo hush.
The EMPI stainless PHAT Boy Muffler fits 1300cc to 1600cc based engines in Standard and Super Beetles, as well as Karmann Ghias.
Must Use 00-3100-0 and 00-3102-0 Extractors
Engine: Type 2 63-71
Coating: Stainless Steel
Fits: All Premium Extractors -
Replacement sideflow muffler for our 00-3448-0 exhaust system.
Type 2 Bus 63-67
Made from high quaility stainless steel -
Replacement sideflow muffler for our 00-3255-0 exhaust system.
Type 2 Bus 68-71
Made from high quaility stainless steel -
Replacement sideflow muffler for our 00-3762-0 exhaust system.
Made from high quaility stainless steel -
Replacement dual quiet muffler w/ chrome tips and small 3 bolt flange. Fits type 1 & ghia, 66-73.
Coating: None, Raw Steel -
Replacement sideflow muffler for our 00-3448-0 exhaust system.
Black with a stainless Tip. -
Replacement sideflow muffler for our 00-3256-0 and 00-3257-0 exhaust system.Only 4 left in stock
Black with a stainless Tip.
One left then discontinued -
Single quiet exhaust system. These precision designed systems feature 1-1/2 inches tubing and large 3 bolt muffler flange. Mufflers feature black tips. All systems include aluminum flex hose and installation kit.
Beetle Type 1: 66-73
Ghia: 66-73. -
Looking for a high quality, european made replacement muffler? This is the one! With Attention to OEM Details, pre-heater boxes, muffler seam, exhaust tip supports, all OEM quality
1500-1600cc. -
Clamp for installing your tail pipe on a aircooled motor.
Beetle Type 1: 55-74
Ghia: 56-76
Super Beetle: 71-79 -
The heater box, J-tube or tail pipe clamp kit contains the 2 piece metal clamp, a sealing gasket and clamp ring along with the 2 nuts and 2 bolts. The clamp kit is used to hold your muffler to each heater box or J-tube or to hold a tail pipe to the muffler and is used on 1955-1974 Standard Beetles, 1971-1974 Super Beetles, 1956-1974 Karmann Ghias, 1955-1971 Type 2 models, 1962-1973 Type 3 models and 1974 Things.
Super Beetle: 71-74 -
Replacement quiet muffler for type 2 and type 4. Fits our 00-3439-0 3 bolt flange header. Quiet dual chamber design helps reduce noise. Black is a protective coating only. It will burn off once ran
Coating: None, Raw Steel. -
Chromed exhaust tips add a racy tone to your stock muffler system
-
The European made stock replacement muffler by EMPI has OEM quality and is the perfect exhaust system for a classic Volkswagen restoration. This VW muffler comes complete with stock pre-heater boxes, exhaust tip supports, and a perfect muffler seam. Compatible with Type 1 40 HP 1200cc based engines. Referenced OEM part number: 111 251 051H
-
Replacement gasket for your catalytic converter and the muffler.
Vanagon: 83-91
Westfalia Camper: 83-91
The 3 bolt flange exhaust gasket is the original steel sandwiched type used by VW. The exhaust gasket is used on 1975 through 1979 California Model Standard & Super Beetles between the exhaust cross over pipe and the catalytic converter. It is also used on 1975 through 1978 Type 2 Bus exhaust ports at the heater box. The gasket is sold individually. -
Installation kit for damper pipe on your Type 2 Bus 60-71
Bus Type 2: 60-71 -
This is a muffler installation kit for your VW. Don't try to reinstall your old rusted hardware. Use this new kit. Clamps the header to the heater box or J-Tubes
Bus Type 2: 60-71. -
Replacement Tail Pipe for your Type 2 Bus
The tail pipe will mount to the damper pipe number 147-251-157 and damper pipe bracket 211-251-301A
Bus Type 2: 60-71 -
Damper Pipe Bracket for Type 2 Bus. Each
Bus Type 2: 60-71 -
Replacement Damper Pipe for your Type 2 Bus
Bus Type 2: 60-71. -
These bad phat boys provide maximum flow and power with a distinctive turbo hush.
The EMPI PHAT Boy Muffler fits 1300cc to 1600cc based engines in Standard and Super Beetles, as well as Karmann Ghias.
This VW Muffler mounts in the 1 oclock position on a small 3 bolt flange and can be used with J-Tubes or stock heater boxes
Kit includes gaskets, stainless steel bolts, and copper nuts. Compatible with exhaust headers part numbered 3100, 3102, and 3767.
Engine: Type 1 1300-1600cc
Coating: None, Raw Steel
Fits: All Premium Extractors -
Replacement 3 bolt muffler. Single quiet in black with a chrome tip. Fits type 3 vw. Fits out 00-3661-7 header..
Coating: None, Raw Steel. -
Give your stock muffler a custom look and deeper sound with these inches step inches pipe exhaust tips. Angle cut extension features a baffled insert for a more throaty sound. Chrome plating adds a custom look. Simply remove the stock tip and install these in their place.
-
Replacement muffler for the 00-3714-0 exhaust kit. 3 bolt flange style. Black coating is for protection only. It will burn off when run.
works on 75-78 VW Bus
Coating: None, Raw Steel. -
This quiet muffler fits empi 3 bolt flange baja header and requires pipe 00-3468-0 to connect the muffler to the header.
Can be used with J-Tubes or stock heater boxes
Coating: None, Raw Steel -
Replacement quiet muffler for the single quiet exhaust system. Muffler only.. Fits type 1 & ghia, 66-73, type 2 63-71.
Ghia: 66-73
Bus Type 2: 63-71 -
Replacement single glasspack muffler with chrome tip and small 3 bolt flange. Fits type 1 & 2 only
Coating: None, Raw Steel -
Give your stock muffler a custom look and deeper sound with these inches step inches pipe exhaust tips. Angle cut extension features a baffled insert for a more throaty sound. Chrome plating adds a custom look. Simply remove the stock tip and install these in their place
-
Replacement muffler insert for our 4 pipe exhaust system Part Number 18-1047-0..
Length: 10-5/8 inches
Diameter: 2-3/8 inches
Quantity: Sold Each -
Inserts for our popular mega dual exhaust. These inserts will slip into the pipe and seat themselves into the taper. Requires a tap from a hammer and a 2x4. We also recommend either a tac weld or a self tapping screw to help hold it in. Sold each
-
Slip in baffle for stinger exhaust. 2 inches diameter and 7-1/4 inches long.
Fiberglass wrapped. -
Fukenbroken Decal for your VW
-
Baja stinger baffle. 13-1/2 inches long. Fiberglass wrapped with a serated inner core to help reduce sound. Fits the 00-3377-0 and 00-3382-0 stingers for the baja exhaust systemsOnly 2 left in stock
Length: 13-1/2 inches
Diameter: 2 inches
Quantity: Sold Each -
Replacement tail pipe
Beetle Type 1: 67-73
Sold Each -
BUGPACK
BUGPACK Dual Quiet Pack Muffler
Part Number: B2-5440-S
The BUGPACK Dual Quiet Pack Muffler is one of two options to be used in conjunction with the Street Header. Made from Stainless Steel with thick flanges for a solid seal and TIG Welded for a long life. The B2-5440-S Muffler is designed to fit the B2-0311-S Street Header. -
The BUGPACK Merged Mondo Muffler is one of 3 options available to install with the Merged Header. Made from Stainless Steel with thick flanges for a solid seal and TIG Welded for a long life. The B2-5602-S Muffler is designed to fit the B2-0081-S & B2-0111-S Merged Headers.
-
The BUGPACK Mondo Muffler is one of four options available to install with the Street Header. Made from Stainless Steel with thick flanges for a solid seal and TIG Welded for a long life. The B2-5601-S Muffler is designed to fit the B2-0311-S Street Header.
-
The BUGPACK Hide-Out Muffler is one of 3 options available to install with the Merged Header. Made from Stainless Steel with thick flanges for a solid seal and TIG Welded for a long life. The B2-5570-S Muffler is designed to fit the B2-0081-S & B2-0111-S Merged Headers.
-
The BUGPACK Single Quiet Pack Muffler is one of two options available to install with the Street Header. Made from Stainless Steel with thick flanges for a solid seal and TIG Welded for a long life. The B2-5420-S Muffler is designed to fit the B2-0311-S Street Header.