PUSHRODS for Beetle Sedan 1961

Heat treated of highest quality 5/16 inches steel tubing for use with vw adjustable rockers. Unique design insures no flex operation thru entire rpm range.
Quantity: 8 Pieces

JayCee pushrods are 3/8 inch and .095 thick wall. Our pushrods compliment the spring pressures your high revving motor requires. 11.500 long
Set of 8

Manton 4130 Chromoly push rods. Top shelf push rods for your HP motor.
11.50 long made of strong 3/8 035 moly.
Set of 8

Manton 4130 Chromoly push rods. Top shelf push rods for your HP motor.
11.50 long made of strong 3/8 058 moly.
Set of 8

Heat treated of highest quality 5/16 inches steel tubing for use with vw adjustable rockers. Unique design insures no flex operation thru entire rpm range.
Stock length (11.078 inches ) with pre-installed ends, fits 1300-1600cc engines
OEM NUMBER: 311-109-301A
Length: 11.078 inches
Quantity: 1 Pieces

This pushrod measuring tool will allow your accurately setup your valve train geometery without the old fashion trial and error method. Simply put the pushrod in the tube and bolt the rockers down. Turn the pushrod nuts to expand the rod until desired valve lift is achieved. Then pull the rod out, measure it and cut your new pushrods to length
Engine Type: All Years VW
Quantity: 1 Piece.

Made from 4130 .080 wall 3/8 Chromoly tubing with 60 Rockwell hardened tips. These pushrods are designed to withstand the demands of dual spring loads and high RPM. 11.060 Overall length
Cut to desired length

Made from 4130 .080 wall 3/8 Chromoly tubing with 60 Rockwell hardened tips. These pushrods are designed to withstand the demands of dual spring loads and high RPM. 11.060 Overall length with both tips installed