TRANSMISSION DRIVE FLANGES for Beetle Sedan 1963
Items:
1–8 of 8
Sort by:
Recommended
-
Convert your type 1 transmission to accept type 2 cv joints with these heavy duty chromoly flange. Tapped for 8mm thread cv bolts. Sold as a pair. Uses beetle flange plugs
Transmission: Type 1 Beetle
Quantity: 2 Pieces -
Convert your type 1 irs transmission to strong 930 cv joints using these adapter drive flanges. Made of heavy duty chromoly. Tapped for 3/8 inches fine thread. Sold as a pair. Uses part number 98-5140-b flange plugs
Transmission: Type 1
Quantity: 2 Pieces -
This is a stock replacement Type 1 beetle drive flange.
OEM Number: 113-517-283
Sold Each -
Convert your 6 rib 091 bus transmission to 930 cv joints using these heavy duty chromoly flanges. Tapped for 3/8 inches fine thread cv bolts. Sold as a pair. Uses part number 98-5140-b flange plugs
Transmission: 091 Type 2 Bus
Quantity: 2 Pieces -
These are the seals that tap into the drive flanges on type 1 vw IRS transmissions. Behind these seals is the snap ring to hold the drive flange to the output shaft on the transmission. Over time these can become dislodged or begin leaving. They are pressed in and should be replaced whenever you have a CV joint off
Type 3: 69-74 -
These special urethane seals fit right into the cv joint flanges to prevent the axles from beating the transmissions. Tough urethane will not tear or flatten like stock seals. For use with T1 to T2 conversion drive flanges and T1 stock drive flanges. Sold in pairs
-
These special urethane seals fit right into the CV joint flanges to prevent the axles from beating the transmissions. Tough urethane will not tear or flatten like stock seals. Sold in pairs
-
Type 2 replacement drive flange plug, fits 69-79
Bus Type 2: 68-79
Vanagon: 80-92
Transmission Type: Bus 002.