BILLET MOUNTING CLAMPS for Beetle Sedan 1966

Light mounts for small billet lights. Fits 1-1/2 inches tubing. Perfect solution to avoid welding when adding more lights

Light mounts for small billet lights. Fits 1-3/4 inches tubing. Perfect solution to avoid welding when adding more lights

Light mounts for small billet lights. Fits 1-1/2 inches tubing. Perfect solution to avoid welding when adding more lights.
Black Finish.

Light mounts for small billet lights. Fits 1-3/4 inches tubing. Perfect solution to avoid welding when adding more lights.
Black Finish.

Universal mounting bracket for 1 inches diameter tube. Combine function and beauty with these custom machined and fully polished aluminum billet mounts. 1/4-20 mounting screw thread with a 1 inches spacing in between

Universal mounting bracket for 1-1/4 inches diameter tube. Combine function and beauty with these custom machined and fully polished aluminum billet mounts. 1/4-20 mounting screw thread with a 1 inches spacing in between

Fits 1-1/2 inches tubing. Bolt together design with two threaded holes for attaching things. 1/2 inches wide. Highly polished. Sold each

Billet bracket clamps on 1-1/2 inches tubing
Hole Threads: 1/4-20

Thru bolt design. Made of billet aluminum and clamps on a 1-1/2 inches diameter tube. Bracket is 3-1/2 inches across. Highly polised

Billet side drilled bracket. Clamps on 1-1/2 inches tubing. Polished for great appearance. Holes are mounted sideways.
Hole spacing: 1.925 inches center-to-center
Thickness: 1/2 inches
Width: 2 3/4 inches
Hole Diameter: 1-1/2 inches

Shaped with a single post. Use to mount mirrors, lights etc. Available in 1-1/2 and 1-3/4 tubing
Thread Size: 3/8-16

Shaped with a single post. Use to mount mirrors, lights etc. Available in 1-1/2 and 1-3/4 tubing
Thickness: .660 inches
Hole Thread: 3/8-16

Shaped with a single post. Use to mount mirrors, lights etc. Available in 1-1/2 and 1-3/4 tubing
Hole Thread: 3/8-16

Shaped with a single post. Use to mount mirrors, lights etc. Available in 1-1/2 and 1-3/4 tubing
Hole Thread: 3/8-16

Billet universal bracket. Threaded holes allows attachment. 1-1/2 inches hole

Chrome Clamp on bracket for 1-1/2 inches tube. Mounts deluxe side view mirror AC857817
Width: 1.160 inches
Diameter (Outside): 2.860 inches
Bolt Thread: 10mm x 1.5

Black Clamp on bracket for 1-1/2 inches tube. Mounts deluxe side view mirror AC857817
Width: 1 3/16 inches
Diameter (Outside): 1 7/8 inches
Bolt Hole: 3/8 inches

Clamp on bracket for 1-3/4 inches tube. Mounts deluxe side view mirror

Attaches to the windshield frame groove. Our bolt on billet mirrors will screw right in.
EA.
Thickness (top): .766 inches
Thickness (bottom): .959 inches .
Height: 1.810 inches
Width: 1.300 inches
Hole Thread: 10mm x 1.25

Manx mirror mount in anodized black. Attaches to the windshield frame groove. Our bolt on billet mirrors will screw right in.
EA
Hole Thread: 10mm x 1.25

Bolt-on most any accessory - gps, coil...Anything that you can bolt-on to the flat billet bracket.
Length: 4-7/16 long,
Height: 2-3/8 tall
Width: 2-1/2

Bolt-on most any accessory - GPS, coil...Anything that you can bolt-on to the flat billet bracket
Length: 4-7/16
Height: 2-3/8
Width: 1-1/4

Set of 5
Bolt-on J hook support brackets - perfect installation of floor pan or mesh

Bolt-on most any accessory - GPS, coil...Anything that you can bolt-on to the flat billet bracket
Height: 3
Width: 2-1/2

Billet fire extinguisher clamp. Fits 1-1/2 inches tubing.
Clamp Size: 1-1/2 inches
Threaded Holes Size: 1/4 inches

Polished aluminim gps mount securely holds your hand held unit in clear view for quick reference. Features polished aluminum construction with adjustable thumb screws to fit most hand held gps units

Polished billet aluminum plate to mount your orv stickers. Bolt on our use a billet clamp number ac740114 for a quick easy mount to 1-1/2 inches tube. Clamp not included. Measures 2-3/4 inches x 4-1/4 inches

Billet aluminum clamp mounts your remote shock reservoir to your chassis. 1-1/2 to 2 inches holes. Sold each
Chassis Clamp Size: 1-1/2 inches
Shock Reservoir Size: 2 inches
Material: Aluminum

Billet tach mount attaches to a 1-1/2 inches tube. Swivel head design allows you to position the gauge to is best viewable angle
Clamp Width: 1/2 inches
Clamp Size: 1-1/2 inches

Mounts an autometer monster tack. Swivels to adjust visability. Use bracket ac740111-1.5 to convert to a clamp on.
3/4 inches center to center on the mounting holes and 1/4-20 bolt.
Length: 4-3/4 inches
Width: 1-1/4 inches
Material: Aluminum

Weld in tubing caps
Material: Aluminum

Fits the ends of rhino bumpers....
.081 inches inches wall thickness.
Wall Thickness: .082 inches
Material: Aluminum

Fits the ends of rhino bumpers...
.081 inches inches wall thickness..
Wall Thickness: .081 inches
Material: Aluminum

Fits the ends of rhino bumpers...
.081 inches inches wall thickness.....
Material: Aluminum

Fits the ends of 1.5 inches inches tubing. Adds a very nice finishing touch....
Fitment guide:
1-1/2 inches inches tubing
.086 inches inches wall thickness
Wall Thickness: .086 inches
Material: Aluminum

Fits the ends of 1.5 inches inches tubing. Adds a very nice finishing touch..
1-1/2 inches inches tubing.
Material: Aluminum

Fits the ends of 1.75 inches inches tubing. Adds a very nice finishing touch...
.120 inches inches wall thickness..
Material: Aluminum

Quickcar 66-908 Roll Bar Clamp Reducer 1-3/4 In to 1-1/2 In This QuickCar Roll Bar Clamp Reducer is designed to allow brackets to mount from 1-3/4 In round roll bar tubing down to 1-1/2 In round roll bar tubing. Made from high-quality aluminum material. Sold each.

Quickcar 66-920 Helmet Hook 1-3/4 In Helmet Hook to clamp on 1-3/4 In roll bar tubing. Comes anodized gray with stainless bolts.

Quickcar 66-936 Helmet Hook 1-1/2 In Helmet Hook to clamp on 1-1/2 In roll bar tubing. Comes anodized gray with stainless bolts.

Quickcar 66-939 1-1/2 In Roll Bar Mounting Bracket This QuickCar Panel Mounting Bracket is designed to be used with 1-1/2 In Roll Bar Tubing. These universal fit brackets fit most all racing types of switch and gauge panels. Made from high-quality aluminum. Sold as one pair. BRACKETS ONLY, does not include switch panel.

Quickcar 66-940 1-3/4 In Roll Bar Mounting Bracket This QuickCar Panel Mounting Bracket is designed to be used with 1-3/4 In Roll Bar Tubing. These universal fit brackets fit most all racing types of switch and gauge panels. Made from high-quality aluminum. Sold as one pair. BRACKETS ONLY! Does not include switch panel.

Quickcar 66-945 1-5/8 In Roll Bar Mounting Bracket This QuickCar Panel Mounting Bracket is designed to be used with 1-5/8 In Roll Bar Tubing. These universal fit brackets fit most all racing types of switch and gauge panels. Made from high-quality aluminum. Sold as one pair. BRACKETS ONLY! Does not include switch panel.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Universal 1/4 In thick aluminum brackets may be drilled, and tapped, to custom mount just about anything.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Universal 1/4 In thick aluminum brackets may be drilled, and tapped, to custom mount just about anything.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Universal 1/4 In thick aluminum brackets may be drilled, and tapped, to custom mount just about anything.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Clamp fastens around a 1-1/2 In door bar allowing a steel door plate to be mounted to the outside of the door bar area. Clamp eliminates the need to weld mounting tabs or door plate directly to a finished chassis. Sold each and includes 1/2 In mounting hardware.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. Clamps are 1/2 In wide and include two 1/4 In button head fasteners.

Bracket keeps fire extinguisher secure and allows quick access by pulling pin. Bracket mounts most 2-1/2 lb. extinguishers with an O.D. up to 3-1/2 In to round tubing with supplied clamps or fastens to a flat panel including trailer or shop walls.

Fire Extinguisher Mount, Quick Release, Bolt On, Flat Mount, NHRA, Aluminum / Steel, Natural, 3-3/8 in Bottle, 2-1/2 lb Fire Extinguishers, Kit

Steel plate is useful for many building projects or fabricating brackets. 10 gauge (1/8 In thick) mild Steel plate is ideal for adding a protective cover to the drivers side floor or door bar area of circle track cars.

NHRA approved bracket keeps fire extinguisher secure and allows quick access by pulling pin. Bracket mounts most 2-1/2 lb. extinguishers with a 3 In O.D. to 1-1/2 In- 1-3/4 In round tubing with supplied 3/4 In wide stainless t-bolt bands or fastens to a flat panel.