BODY BOLTS for Beetle Sedan 1966

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface arear preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

Kit allows the clip to stay fastened to body panel or angle bracing when removing body panels for maintenance or cleaning. 1/4"-20 thread bolts are 1-1/8" UHL and have a built-in captured washer.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface arear preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4" O.D. aluminum washers work with most body bolts to increase the surface area preventing pull through while providing a smooth finished look. Washers are 1/8" thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4" in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4" O.D. aluminum washers work with most body bolts to increase the surface area preventing pull through while providing a smooth finished look. Washers are 1/8" thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4" in diameter.

Kit allows the clip to stay fastened to body panel or angle bracing when removing body panels for maintenance or cleaning. 1/4"-20 thread bolts are 1-1/8" UHL and have a built-in captured washer.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

Bolts are designed for easy installation and removal, have 1/4"-20 thread and a built-in captured washer. Body bolts are commonly used to fasten body panels and side skirts for easy removal but may be used any-where a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

Clips stay fastened to body panel or angle bracing when removing body panels for maintenance or cleaning.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

Bolts are designed for easy installation and removal, have 1/4"-20 thread and a built-in captured washer. Body bolts are commonly used to fasten body panels and side skirts for easy removal but may be used any-where a bolt with a captured washer is needed.

1-1/4 In O.D. aluminum washers work with most body bolts to increase the surface area preventing pull through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

Steel clips have built-in In-20 threads making them ideal for often removed panels or when the backside is not easily accessible. Clips feature a friction tab to hold clips firmly in place on panels up to 3/16 In thick. Dimension listed is center of hole to edge of clip (depth).

Nuts have a built-in washer with a serrated face to lock nut tight against panels. 1/4 In-20 nuts are perfect to use as a backer nut with Allstar body bolts, nose bolts, and body stud kits.

1-1/4 In O.D. aluminum washers work with most body bolts to increase the surface area preventing pull through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface arear preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

Nuts have a built-in washer with a serrated face to lock nut tight against panels. 1/4"-20 nuts are perfect to use as a backer nut with Allstar body bolts, nose bolts, and body stud kits.

Kit allows the clip to stay fastened to body panel or angle bracing when removing body panels for maintenance or cleaning. 1/4 In-20 thread bolts are 1-1/8 In UHL and have a built-in captured washer.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

These bolts are the same bolts found in our body bolt kits but without nuts. Bolts have 1/4 In-20 threads and a built-in captured washer. Bolts are commonly used to fasten body panels and side skirts for easy removal, used anywhere a bolt with a captured washer is needed.

Clips stay fastened to body panel or angle bracing when removing body panels for maintenance or cleaning.

Bolts are designed for easy installation and removal, have 1/4"-20 thread and a built-in captured washer. Body bolts are commonly used to fasten body panels and side skirts for easy removal but may be used any-where a bolt with a captured washer is needed.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface arear preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

Kit allows the clip to stay fastened to body panel or angle bracing when removing body panels for maintenance or cleaning. 1/4 In-20 thread bolts are 1-1/8 In UHL and have a built-in captured washer.

Nuts have a built-in washer with a serrated face to lock nut tight against panels. 1/4 In-20 nuts are perfect to use as a backer nut with Allstar body bolts, nose bolts, and body stud kits.

Bolts are designed for easy installation and removal, have 1/4 In-20 thread and a built-in captured washer. Body bolts are commonly used to fasten body panels and side skirts for easy removal but may be used any-where a bolt with a captured washer is needed.

Steel clips have built-in In-20 threads making them ideal for often removed panels or when the backside is not easily accessible. Clips feature a friction tab to hold clips firmly in place on panels up to 3/16 In thick. Dimension listed is center of hole to edge of clip (depth).

Bolts are designed for easy installation and removal, have 1/4 In-20 thread and a built-in captured washer. Body bolts are commonly used to fasten body panels and side skirts for easy removal but may be used any-where a bolt with a captured washer is needed.

Nuts have a built-in washer with a serrated face to lock nut tight against panels. 1/4 In-20 nuts are perfect to use as a backer nut with Allstar body bolts, nose bolts, and body stud kits.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface area preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.

Bolts are designed for easy installation and removal, have 1/4 In-20 thread and a built-in captured washer. Body bolts are commonly used to fasten body panels and side skirts for easy removal but may be used any-where a bolt with a captured washer is needed.

1-1/4 In O.D. plastic washers work with most body bolts to increase the surface arear preventing pull-through while providing a smooth finished look. Washers are 1/8 In thick and have a built-in pocket to accept most body bolts or other washer headed fasteners up to 3/4 In in diameter.