STEERING SHAFTS & ACCESSORIES for Beetle Sedan 1968

3/4 in .120 wall raw steering shaft.

3 bolt flange for fitting almost any steering wheel. This flange will accept most 3 bolt wheels. If you have anothing other than a 3 bolt flange, you will just need to pick out one of our adapters

Length: 59 inches
Diameter: 3/4 inches
Finish: Raw

Steering shaft. 7/8 inches diameter.

3 bolt flange for fitting almost any steering wheel. This flange will accept most 3 bolt wheels. If you have anothing other than a 3 bolt flange, you will just need to pick out one of our adapters

Length: 59 inches
Diameter: 7/8 inches
Finish: Raw

3/4 in .120 wall steering shaft.

Chrome finish. 3 bolt flange for fitting almost any steering wheel. This flange will accept most 3 bolt wheels. If you have anothing other than a 3 bolt flange, you will just need to pick out one of our adapters

Length: 59 inches
Diameter: 3/4 inches
Finish: Chrome

Chrome steering shaft. 7/8 inches diameter .120 wall.

3 bolt flange for fitting almost any steering wheel. This flange will accept most 3 bolt wheels. If you have anothing other than a 3 bolt flange, you will just need to pick out one of our adapters

Length: 59 inches
Diameter: 7/8 inches
Finish: Chrome

Black

Use this shaft mount to couple your steering shaft to a stock vw gearbox. Use the urethane steering couple in between the halves to make the connection. This kit uses O.E. VW splines

Use this shaft mount to couple your steering shaft to a stock vw gearbox. Use the urethane steering couple in between the halves to make the connection. This kit uses O.E. VW splines

Urethane Steering Coupler.

Take the slop out of your steering with these new urethane units.

Replaces The Factory Coupler Between the Steering Box and Steering Shaft

Beetle Type 1: All Years
Material: Urethane
Quantity: 1 Piece

Urethane Steering Coupler.

Take the slop out of your steering with these new urethane units.

Replaces The Factory Coupler Between the Steering Box and Steering Shaft

Beetle Type 1: All Years
Material: Urethane
Quantity: 1 Piece

Stock vw steering coupler. Replace your old worn out coupler with a new high quality rubber one. These get worn out over time and give a loose steering feel. Replace these as soon as you notice a problem to prevent a steering disaster

Beetle Type 1: 46-77
Ghia: 56-74
Type 3: 62-74

These machined aluminum clamps are perfect for eliminating steering shaft movement and play

Steering shaft clamp nut. Split style for 3/4 inches shaft

These machined aluminum clamps are perfect for eliminating steering shaft movement and play.

This holds the shaft from sliding back and forth on the bearing. A must for U-joint steering systems.

Made from aluminum

ID: 7/8 inches
OD: 1-5/8 inches
Quantity: Sold Each

Steering shaft clamp nut. Split style for 7/8 inches shaft. This holds the shaft from sliding back and forth on the bearing. A must for u-joint steering systems

ID: 7/8 inches
OD: 1-5/8 inches
Quantity: Sold Each

Steering shaft for super beetle. Type 1 75-79

Super Beetle: 75-79
Quantity: Sold Each

Steering shaft for super beetle. Type 1 71-74

Super Beetle: 71-74
Quantity: Sold Each

Steering Coupler.

Take the slop out of your steering with these new urethane units.

Replaces The Factory Coupler Between the Steering Box and Steering Shaft

Bus Type 2: 68-89
Material: Rubber
Quantity: 1 Piece

Stock vw steering coupler. Replace your old worn out coupler with a new high quality rubber one. These get worn out over time and give a loose steering feel. Replace these as soon as you notice a problem to prevent a steering disaster

GERMAN QUALITY

Beetle Type 1: 46-77
Ghia: 56-74
Type 3: 62-74