SHOCK MOUNTS for Beetle Sedan 1974

Quantity: Sold Each
Radius: 1 1/2 inches

Quantity: Sold Each
Radius: 1 1/2 inches

Allows you to install up to 6 shocks on your irs rear suspension. Requires welding. Works great with trailing arm beefing kit. It will be necessary to fabricate upper shock mounts

Quantity: Sold Each
Radius: 2 inches

Quantity: Sold Each
Gap: 1 5/8 inches

This weld on bracket replaces the old urethane and hose clamp method. For 2 inches reservoirs.
Sold: Each

Weld in shock boss. 12mm tapped hole.
Sold: Each

Shock tab made from 1/8 thick chromoly. Fits 1 5/8 tubing and features a 1/2 hole. Quantity: Sold Each Hole Diameter: 1/2 Thickness: 1/8 Radius: 1 5/8 inches

Quantity: Sold Each
Length: 7 inches

Quantity: Sold Each
Quantity: Sold Each

Mild steel shock bracket with bushings (2). For 1/2 inches bolt 1-1/4 inches flat mt.
Height: 1 5/8 inches

Weld in shock boss. 1-3/4 inches long, each.
Hole Diameter: 12mm
Sold: Each

Quantity: Sold Each
Quantity: Sold Each

Quantity: Sold Each
Quantity: Sold Each

Weld in shock boss. 1/2 inches Inside Diameter, 1 inches Outside Diameter and 1 3/4 inches long. Sold Each.
Quantity: Sold each
Sold: Each

Quantity: Sold Each
Height: 2 5/8 inches

Mild steel shock bracket with bushings (2). For 1/2 inches bolt 1-7/8 inches flat mt.
Height: 1.687 inches

For multi shock
Sold: Sold Each

Weld in shock boss. 1/2 inches american tapped.
Sold: Each

Quantity: Sold Each
Quantity: Sold Each

Mild steel shock bracket with bushings (2). For 1/2 inches bolt fits 1-1/2 inches tube dia. Radius mt (right).
Radius: 1 1/2 inches
Height: 1 7/8 inches

Shock Mount, Passenger Side, Weld-On, Notched, Steel, Natural, Universal, Each

Brackets are notched for 1-1/2 In - 1-3/4 In round tubing to create a gusset style mount that welds on three sides. Notched design positions the bracket perpendicular to the tubing at a 90 degree angle and includes 1/2 In shock mounting hardware.

Weld-on shock brackets mount standard and coil-over shocks with 1/2 In I.D. inner bushing or 1/2 In rod end to chassis as well as many other uses. 1/8 In thick mild steel brackets include 1/2 In bolt, spacer and locknut.

Weld-on shock brackets mount standard and coil-over shocks with 1/2 In I.D. inner bushing or 1/2 In rod end to chassis as well as many other uses. 1/8 In thick mild steel brackets include 1/2 In bolt, spacer and locknut.

Brackets are notched for 1-1/2 In - 1-3/4 In round tubing to create a gusset style mount that welds on three sides. Notched design positions the bracket perpendicular to the tubing at a 90 degree angle and includes 1/2 In shock mounting hardware.

Clamp-on shock brackets mount standard and coil-over shocks with 1/2 In I.D. inner bushings to round tubing without welding. Easily add additional mount or pivot mount as needed when experimenting or trying different set-ups. Standard brackets position the shock approximately 1 In below the chassis tubing. Drop mount brackets position the shock approximately 2-1/2 In below the chassis tubing. Brackets include mounting hardware with nyloc locking nuts.

Bracket welds parallel onto round tubing. Bracket is typically mounted above or below tubing and includes 1/2 In shock mounting hardware. Mounting positions are on 1 In centers.

Weld-on shock brackets mount standard and coil-over shocks with 1/2 In I.D. inner bushing or 1/2 In rod end to chassis as well as many other uses. 1/8 In thick mild steel brackets include 1/2 In bolt, spacer and locknut.

Quantity: Sold Each
Hole Diameter: 10mm
Radius: 1 inches

Quantity: Sold Each
Quantity: Sold Each

Quantity: Sold Each
Quantity: Sold Each

Quantity: Sold Each
Hole Diameter: 2 inches Square
Quantity: Sold Each

Quantity: Sold Each
Quantity: Sold Each

Quantity: Sold Each
Hole Diameter: 2 inches
Quantity: Sold Each

Bracket welds parallel onto tubing. Typically mounted above or below tubing and includes 1/2 In shock mounting hardware. Mounting positions are on 1 In centers.