AFTERMARKET MIRRORS for Beetle Sedan 1975

Manx mirror mount in anodized black. Attaches to the windshield frame groove. Our bolt on billet mirrors will screw right in.
EA
Hole Thread: 10mm x 1.25

Attaches to the windshield frame groove. Our bolt on billet mirrors will screw right in.
EA.
Thickness (top): .766 inches
Thickness (bottom): .959 inches .
Height: 1.810 inches
Width: 1.300 inches
Hole Thread: 10mm x 1.25

Polished billet aluminum clamp on mirror. Adds a great custom look to your rail. Easy clamp on installation. Fits 1-1/2 inches tube. Fits left and right sides

Polished billet aluminum clamp on mirror. Adds a great custom look to your rail. Easy clamp on installation. Fits 1-3/4 inches tube. Fits left and right sides.......loc-tite is recomended on set screws.

Beautiful black anodized billet mirror. Adds a custom look to you rail. This mirror can go on the left or right side. Simple bolt on installation.
Mounts with a 8mm 1.25 stud to 10mm 1.25.
Front Dimension: 4.5 inches x 2-25 inches
Arm Length: 5 inches

Polished billet aluminum mirror adds a custom look to your rail. This mirror is oval shaped and will go on the left or right side.
Mounts with a 8mm 1.25 to 10mm threaded stud and nut adapter
Front Dimension: 5-1/8 inches x2-1/8 inches
Arm Length: 5-7/8 inches

Black anodized billet aluminum mirror adds a custom look to your rail. This mirror is oval shaped and will go on the left or right side.
Mounts with a 8mm 1.25 to 10mm 1.25 adapter threaded nut and stud.
Front Dimension: 5-1/8 inches x2-5/8 inches
Arm Length: 5-7/8 inches

Custom billet mirror. Harley Davidson style. Comes with hardware.
Mounts with a 10mm 1.25 stud and nut.
Front Dimension: 4.5 inches x 2.5 inches
Thickness: 2-1/4 inches
Arm Length: 5-7/8 inches

Billet aluminum mirror with a streamline look. Highly polished.
Mounts with 10mm 1.25 stud and nut
Sold as pairs
Front Dimension: 6-125 inches x 2 inches
Arm Length: 5 inches

Beautiful billet mirror. Adds a custom look to you rail. This mirror can go on the left or right side. Simple bolt on installation.
Mounts with a 10mm 1.25 and 8mm 1.25 threaded nut adapter.
Front Dimension: 4.5 inches x 2.25 inches
Arm Length: 5-7/8 inches

Side view, rectangular mirror. Mirror size is 2 inches x 3 inches . Radius mount for 1-1/2 inches tubing. Polished billet aluminum. Add a very custom look to your car. Center pin allows mirror to adjust

Side Mirror. Flat
NOTE: THE MIRROR THREADS INTO THE HOUSING, BE SURE TO CHECK TO MAKE SURE THE MIRROR IS THREADED IN TIGHT BEFORE USE.

Deluxe side view mirrors are great on sand rails and custom cars. These can be clamped on using special tube clamps and are fully adjustable and sealed.
NOTE: THE MIRROR THREADS INTO THE HOUSING, BE SURE TO CHECK TO MAKE SURE THE MIRROR IS THREADED IN TIGHT BEFORE USE.
Diameter: 4-1/4 inches
Height: 6-3/8 inches
Thickness: 3 inches

Deluxe side view mirrors are great on sand rails and custom cars. These can be clamped on using special tube clamps and are fully adjustable and sealed.
Mounting clamps are sold seperatly and available in both black and polished as well as for 1.5 and 1.75 inches tubing...
Thickness: 3 inches

BLACK Billet new school mirror, convex lens for added visibility. This is for the mirror only.
Mounting clamps are sold seperatly and available in both black and polished as well as for 1.5 and 1.75 inches tubing.
Clamp Part Numbers
AC857816b-1.5
AC857816b-1.75
Mirror Type: Convex
Finish: Black

BLACK Billet new school mirror, flat glass.
Mounting clamps are sold seperatly and available in both black and polished as well as for 1.5 and 1.75 inches tubing
Lens Type: Flat
Finish: Black

Billet polished new school mirror, convex lens for added visibility.
4 inches x 2-3/4 inches face dimensions. 1-1/4 inches thick and 4-7/8 inches wide.
Lens Type: Convex
Finish: Polished

BLACK Billet clamp for new school mirror to bolt to 1-1/2 inches tubing.
Bolts together with 8mm bolt
Width: .851 inches
Material: Aluminum

Billet clamp for new school mirror to bolt to 1-1/2 inches tubing

Beautiful exterior rear view mirrors have a 4 In diameter stainless steel head and a 5 In long chrome arm. Mounting is blind with one bolt. Sold in pairs.

Chrome Peep mirrors have a 4 In stainless steel head and can be slipped over the top edge of driver and passenger side doors and secured with Allen head screws. Arm pivots 360 deg. to any position and has a crowned end to lock the desired position. Includes protective rubber pads. Sold in pairs.

Aerodynamic 3 In diameter mirror quickly and easily mounts to roll cage tubing and includes a 1-1/2 In stainless clamp. High strength, ABS plastic housing with a scratch resistant polycarbonate lens makes this mirror suitable for a variety of motorsports, but most commonly used on asphalt late models. Adjustable mirror lens pivots in the housing for optimum driver visibility.

BLACK Billet clamp for new school mirror to bolt to 1-3/4 inches tubing.
Held together with 8mm bolts.
Tubing Size inches 1-3/4 inches
Material: Aluminum

Billet clamp for new school mirror to bolt to 1-3/4 inches tubing

Polished
Length: 6-1/4 inches