AFTERMARKET MIRRORS for Beetle Sunroof 1972

Manx mirror mount in anodized black. Attaches to the windshield frame groove. Our bolt on billet mirrors will screw right in.
EA
Thickness (top): .766 inches
Thickness (bottom): .959 inches .

Height: 1.810 inches
Width: 1.300 inches
Hole Thread: 10mm x 1.25

Attaches to the windshield frame groove. Our bolt on billet mirrors will screw right in.
EA.
Thickness (top): .766 inches
Thickness (bottom): .959 inches .

Height: 1.810 inches
Width: 1.300 inches
Hole Thread: 10mm x 1.25

Polished billet aluminum clamp on mirror. Adds a great custom look to your rail. Easy clamp on installation. Fits 1-1/2 inches tube. Fits left and right sides

Polished billet aluminum clamp on mirror. Adds a great custom look to your rail. Easy clamp on installation. Fits 1-3/4 inches tube. Fits left and right sides.......loc-tite is recomended on set screws.

Beautiful black anodized billet mirror. Adds a custom look to you rail. This mirror can go on the left or right side. Simple bolt on installation.

Mounts with a 8mm 1.25 stud to 10mm 1.25.

Sold Each

Front Dimension: 4.5 inches x 2-25 inches
Thickness: 1-3/4 inches
Arm Length: 5 inches

Polished billet aluminum mirror adds a custom look to your rail. This mirror is oval shaped and will go on the left or right side.

Mounts with a 8mm 1.25 to 10mm threaded stud and nut adapter

Front Dimension: 5-1/8 inches x2-1/8 inches
Thickness: 1-5/8 inches
Arm Length: 5-7/8 inches

Black anodized billet aluminum mirror adds a custom look to your rail. This mirror is oval shaped and will go on the left or right side.

Mounts with a 8mm 1.25 to 10mm 1.25 adapter threaded nut and stud.

Sold Each

Front Dimension: 5-1/8 inches x2-5/8 inches
Thickness: 1-5/8 inches
Arm Length: 5-7/8 inches

Custom billet mirror. Harley Davidson style. Comes with hardware.
Mounts with a 10mm 1.25 stud and nut.

Sold as a pair

Front Dimension: 4.5 inches x 2.5 inches
Thickness: 2-1/4 inches
Arm Length: 5-7/8 inches

Beautiful billet mirror. Adds a custom look to you rail. This mirror can go on the left or right side. Simple bolt on installation.

Mounts with a 10mm 1.25 and 8mm 1.25 threaded nut adapter.

Sold Each

Front Dimension: 4.5 inches x 2.25 inches
Thickness: 1-3/4 inches
Arm Length: 5-7/8 inches

Side view, rectangular mirror. Mirror size is 2 inches x 3 inches . Radius mount for 1-1/2 inches tubing. Polished billet aluminum. Add a very custom look to your car. Center pin allows mirror to adjust

Side Mirror. Flat

Made of tough billet aluminum with rubber mounted mirror. Mounting surface can either be bolted down or mounted to a clamp (sold seperate) to hook to a tube.

NOTE: THE MIRROR THREADS INTO THE HOUSING, BE SURE TO CHECK TO MAKE SURE THE MIRROR IS THREADED IN TIGHT BEFORE USE.

Deluxe side view mirrors are great on sand rails and custom cars. These can be clamped on using special tube clamps and are fully adjustable and sealed.

Mounting clamps are sold seperatly and available in both black and polished as well as for 1.5 and 1.75 inches tubing.

NOTE: THE MIRROR THREADS INTO THE HOUSING, BE SURE TO CHECK TO MAKE SURE THE MIRROR IS THREADED IN TIGHT BEFORE USE.

Sold each

Diameter: 4-1/4 inches
Height: 6-3/8 inches
Thickness: 3 inches

Deluxe side view mirrors are great on sand rails and custom cars. These can be clamped on using special tube clamps and are fully adjustable and sealed.

Mounting clamps are sold seperatly and available in both black and polished as well as for 1.5 and 1.75 inches tubing...

NOTE: THE MIRROR THREADS INTO THE HOUSING, BE SURE TO CHECK TO MAKE SURE THE MIRROR IS THREADED IN TIGHT BEFORE USE.

Sold each

Diameter: 4-1/4 inches
Height: 6-3/8 inches
Thickness: 3 inches

BLACK Billet new school mirror, convex lens for added visibility. This is for the mirror only.

Mounting clamps are sold seperatly and available in both black and polished as well as for 1.5 and 1.75 inches tubing.

Clamp Part Numbers
AC857816b-1.5
AC857816b-1.75

Material: Billet Aluminum
Mirror Type: Convex
Finish: Black

Billet polished new school mirror, convex lens for added visibility.

4 inches x 2-3/4 inches face dimensions. 1-1/4 inches thick and 4-7/8 inches wide.

Mounting clamps are sold seperatly and available in both black and polished as well as for 1.5 and 1.75 inches tubing

Material: Billet Aluminum
Lens Type: Convex
Finish: Polished

Beautiful exterior rear view mirrors have a 4 In diameter stainless steel head and a 5 In long chrome arm. Mounting is blind with one bolt. Sold in pairs.

Chrome Peep mirrors have a 4 In stainless steel head and can be slipped over the top edge of driver and passenger side doors and secured with Allen head screws. Arm pivots 360 deg. to any position and has a crowned end to lock the desired position. Includes protective rubber pads. Sold in pairs.

Aerodynamic 3 In diameter mirror quickly and easily mounts to roll cage tubing and includes a 1-1/2 In stainless clamp. High strength, ABS plastic housing with a scratch resistant polycarbonate lens makes this mirror suitable for a variety of motorsports, but most commonly used on asphalt late models. Adjustable mirror lens pivots in the housing for optimum driver visibility.

EMPI and renowned designer Chip Foose have collaborated on a new rear view mirror mount and mirror to give your Dune Buggy a cleaner look and custom touch

Created using Chip’s concept sketches and SolidWorks CAD, the EMPI team has CNC machined these rear view mirror mounts with an engraved Foose Design logo in 6061 T-6 aluminum for a perfect fit with a polished finish for a long-lasting shine

Fits any Dune Buggy with an extruded aluminum windshield frame

Stainless Steel hex head fasteners included.

BLACK Billet clamp for new school mirror to bolt to 1-3/4 inches tubing.

Held together with 8mm bolts.

Sold Each

Tubing Size inches 1-3/4 inches
Width: .851 inches
Material: Aluminum

Billet clamp for new school mirror to bolt to 1-3/4 inches tubing

Polished

Perfect component for our 17-1003-0 billet mirror for rhinos. These clamps allow for easy attachment to 1.5 inches tubing.

Sold Each

Thickness: .476 inches
Hole Size: .277 inches
Length: 6-1/4 inches