ELECTRIC FANS for Karmann Ghia Coupe 1957

9 inches replacement fan can be used for custom applications.
These fit our 72 and 92 plate oil coolers..
Patented skewed blade design results in high efficiency with lower noise.
Can be run as a pusher of puller be reversing the fan blade assembly. 570 max cfm at 5.4 amps
Diameter: 9 inches
CFM: 570
Fits: 72 & 92 Plate

Rubber mounts for oil coolers. Helps absorb the shock of driving offroad. Sold as a set of 4
Height: 1 inches
Stud Size: .225
Quantity: 4 Pieces.

No worries about cooking your engine with this thermo switch. Can be spliced into existing 1/2 inches oil hose or connected using -8 AN fittings.
Designed to be mounted in-line or adapter directly to the mesa style oil coolers, this in line thermostat automatically operates the oil cooler fan.
Switches at 180 degrees
Activation Temp: 180 F
Fittings -8 AN or 1/2

Mounts inline and bypasses the oil cooler until oil temp reaches the right temp. This unit insures quick warm-ups when and where required. Designed to remain partially open at all times to keep oil in the lines eliminates dry starts. Will open at 175 degrees

Quickcar 60-032 Fan Mounting Kit Fan Mounting Kit uses 4 black nylon ties to secure a electric fan onto a radiator. Sold individually as a complete kit.

Quickcar 60-039 Electric Fan Relay Kit 40 Amp Relay and 200F sending unit both included with this kit that will activate an electric fan (not included) when the temperature of the motor rises above 200F. Sending unit must be placed in water jacket and has 3/4-NPT threads. Sender is NOT ADJUSTABLE Replacement relay part number is 57-750, call 1-800-997-7333 toll free for details.

Quickcar 61-740 235 Water Temperature Switch This switch is commonly used to activate warning lights on QuickCar gauge panels and Quick-Light kits. It has a 235F pre-set activation point. Unit has 1/2 In NPT threads to install in the water system, typically in the intake before the hottest water goes into the radiator. Sold each. *Please contact QuickCar sales/tech team to assure proper sending unit and gauge compatibility.*

Quickcar 61-748 3/8 In NPT 235 Water Temp Switch This switch is commonly used to activate warning lights on QuickCar gauge panels and Quick-Light kits. It has a 235F pre-set activation point. Unit has 3/8 In NPT threads to install in the water system, typically in the intake before the hottest water goes into the radiator. Sold each. *Please contact QuickCar sales/tech team to assure proper sending unit and gauge compatibility.*