BRAKE DRUMS for VW for Karmann Ghia Coupe 1964

Includes:
Beetle Type I: 58-64

Includes:
Beetle Type I: 65

Includes:
Beetle Type I: 66
NOTE: This is a 2 year spread on this axle beam. The best thing to do is measure your inner wheel bearing ID to know for sure which version you have.

Type 1 Beetle
Beetle Type I: 58-64

Type 1 Beetle
Beetle Type I: 68-79

Replacement 5 on 205mm front brake drum. Fits VW king pin front ends.
12mm 1.5 threaded lug stud holes.
Location: Front

PREMIUM VERSION
Replacement 5 on 205mm front brake drum. Fits VW king pin front ends.
Location: Front

Replacement front drum for your VW aircooled beetle. High quaility casting.
This is a 5 bolt for a Ball Joint
Make sure to check your front end application before ordering these.
This is a small inner bearing diameter, where the later model uses a large ID bearing.
Application year: 65,66,67
Bolt Pattern: 5 Bolt 205mm

VW Beetle ball joint 4 lug front brake drum. This front brake drum fits 1968-1977 VW beetles. It is a factory 4 x 130 bolt pattern. 14mm 1.5 threaded holes. These are compatible with all standard beetles. They will NOT fit Super Beetles
Ghia: 68-74
Quantity: Sold Each

Fits VW Super Beetle. 4 on 130mm pattern. Contains 14mm 1.5 threaded lug bolt holes
Pattern: 4 x 130mm
Quantity: Sold Each

Brake drum for swing axle. This is a 5 on 205mm VW pattern and has 12mm 1.5 threaded lug nut holes
Because of the interchangability on a lot of these brake parts it is very important to look over your old parts before ordering. We will have specific questions that will help us make sure you get the correct part.
Quantity: Sold Each

Rear brake drum for IRS VW. This is a 4 on 130mm bolt pattern and has 14mm 1.5 threaded lug stud holes. This is considered a long spline hub.
Ghia: 67-74

Rear brake drum for type 3.
Fits type 3 63-35.
Sold each. Solid 1 piece design
Type 3 VW: 64-67
Quantity: 1 Piece

Rear brake drum for type 3.
The type 3 hubs of this year are a split design and will not come with a splined center.
The hub is sold seperately as part 311-501-581
Quantity: Sold Each

This brake drum allows the conversion from 4 lug VW to 5 Lug without sacrificing to the narrow brake shoes. This would offset your beetle 5/8 Each Side Rear brake drum for VW Thing also fits 69-79 Type 1 Beetle and Super Beetle. 12x1.5 threaded holes Sold each. Solid 1 piece design VW Thing: 69-79 Bolt Pattern: 5 on 205mm Quantity: 1 Piece

Replacement rear brake drum for 64-67 VW Bus. 12mm threaded lug holes. The high quality units are a great replacement. Make sure you tighten the axle nut to 365 ft lb to ensure long life. Anything less can result in spline failure
Quantity: Sold Each

Replacement front brake drum for 64-70 VW Bus. 14mm threaded lug holes. The high quality units are a great replacement.
64-67 applications use seal 211-405-641B
68-70 applications use seal 98-4630-B
Quantity: Sold Each

Replacement rear brake drum for 68-70 VW Bus. 12mm threaded lug holes. The high quality units are a great replacement. Make sure you tighten the axle nut to 365 ft lb to ensure long life. Anything less can result in spline failure
Quantity: Sold Each

Replacement rear brake drum for 71-79 VW Bus. 12mm threaded lug holes. The high quality units are a great replacement. Make sure you tighten the axle nut to 365 ft lb to ensure long life. Anything less can result in spline failure
Quantity: Sold Each.

Replacement backing plate for empi ball joint front brake kit
Fits Kit
22-2850-0
22-2981-0
113-407-075 Rotor
Quantity: Sold Each

Type 1 king pin 50-65
Hardware to mount drums on both sides includes:
-2 thrust washers
-2 lock tabs
-4 spindle nuts (right & left side)
Beetle Type I: 50-65

Type 1 ball joint 66-79
-2 clamp nuts (right & left side)
Beetle Type I: 66-79

Type 1 Beetle
-2 drums
-set of 4 shoes
-2 wheel cylinders
-hardware/spring kit
Beetle Type I: 68-79

New JP Brand backing plate for rear on Type 1
Right Side

New JP Brand backing plate for rear on Type 1
Right Side