CAMSHAFTS for Super Beetle Convertible 1971

Engle cams feature billet strength and reliability.
Lift (1.1): .420 inches
Duration: 276
Lift: .420 inches
Application: Street/Dunes

Engle cams feature billet strength and reliability. Engle offers the widest choice of performance cam grinds available.
Lift (1.1): .430 inches
Duration: 284
Cam Lift: .392 inches
Duration @ .050: 247
Lift: .430 inches
Application: Hot Street/OFF-Road

Engle cams feature billet strength and reliability. Engle offers the widest choice of performance cam grinds available.
Application: Drag/Off-Road

Engle cams feature billet strength and reliability.
Lift (1.1): .465 inches
Cam Lift: .424 inches
Application: Comp. Drag/Off-Road

Brand new stock replacement camshaft.
Must be used with late style oil pumps.
Dished gear is included.
New lifters must be used with a new cam.
113-109-021G
Super Beetle: 72-79
Ghia: 72-74

Brand new stock replacement camshaft. This will fit early style oil pumps only.
Flat gear included.
New lifters must be used with a new cam.
113-109-021D
Ghia: 62-71

Race proven in some of the fastest VW's in the world. EMPI cams feature billet strength and reliability. EMPI offers the widest choice of performance cam grinds available.
Lift (1.1): .460 inches
Duration: 308
Cam Lift: .419 inches
Duration @ .050: 267
Lift: .460 inches
Application: Drag/Off-Road

Must be installed using new cam lifters and requires a bolt on cam gear.
Lift (1.1): .380 inches
Duration: 233
Lobe Center: 108

Must be installed using new cam lifters and requires a bolt on cam gear.
Lift (1.1): .394 inches
Duration: 244
Lobe Center: 108

Must be installed using new cam lifters and requires a bolt on cam gear.
Lift (1.1): .400 inches
Duration: 257
Lobe Center: 108

Tremendous performance and maximum value for your build or rebuild
Produced from new Chilled Cast Iron Billets to EMPIs specifications
Medium Displacement/Mid Range Power/Fair Idle
Street & Off-Road
Valve Lift: .427"@1.1:1
Cam Lift: .388"
Duration: 282
EMPI recommends installing EMPI lifters part number 21-4300-0 with every new EMPI camshaft

Produced from new Chilled Cast Iron Billets to EMPIs specifications
All GT Series Camshafts are Parkerized for trouble-free break-in and Stroker Clearanced
New Grade 8 hardware and assembly lube included, please install with New EMPI Lifters for maximum performance
Cam Card specs included
Small Displacement/Lower Range Power/Smooth Idle
Street, Dune Buggy, Sand Rail & Bus
Valve Lift: .422"@1.1:1
Cam Lift: .384"
Duration: 275
EMPI recommends installing EMPI lifters part number 21-4300-0 with every new EMPI camshaft

Tremendous performance and maximum value for your build or rebuild
Drag Racing & Off-Road Competition
Valve Lift: .455"@1.1:1
Cam Lift: .414"
Duration: 300
EMPI recommends installing EMPI lifters part number 21-4300-0 with every new EMPI camshaft

Tremendous performance and maximum value for your build or rebuild
Large Displacement/High Range Power
Hot Street, Strip & Off-Road Competition
Valve Lift: .430"@1.1:1
Cam Lift: .391"
Duration: 291
EMPI recommends installing EMPI lifters part number 21-4300-0 with every new EMPI camshaft