FABRICATION TOOLS for Super Beetle Convertible 1976

Black anodized two-piece aluminum bracket clamps around tubing with 5/16 In hex head fasteners and has a 1/2 In-13 tapped hole on each side. Mounting stud and nut sold separately.

The Allstar quick turn fastener wrench fits slot head fasteners and reduces the risk of body or fastener damage when using screwdrivers for loosening or tightening. Non-slip handle.

Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4 In, 1 In, 1-1/8 In, 1-1/4 In, 1-1/2 In 1-5/8 In and 1-3/4 In.

Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4 In, 1 In, 1-1/8 In, 1-1/4 In, 1-1/2 In 1-5/8 In and 1-3/4 In.

A hundred uses in the shop or at the track. True Racers Tape.

Hole Diameter: 1/2 inches

Use when drilling is not an option. Smooth throat prevents paint damage, and spring exerts strong clamping pressure. Throat depth is 1 In with a maximum clamping range of 1/2 In.

Hole Diameter: 3/4 inches

Remove burrs from damaged or rusted external threads on bolts, spindles, axle tubes, threaded shaft, pipe, and pipe fittings. Choose from three different files, each 8-1/2 In long. Standard and metric sizes.

Hole Diameter: 1 inches

Flap discs for 4-1/2 In grinders with a 7/8 In arbor quickly remove rust and other coatings from a variety of metal, stainless and steel surfaces. Ideal for grinding welds or preparing materials for welding. Sold each.

Hole Diameter: 1 1/4 inches

Tungsten steel taps are titanium coated. Economy taps are available in right-hand and left-hand threads.

Hole Diameter: 1 1/2 inches

Specially hardened drill bit is required for drilling spring steel. The 17/64 In size simplifies installation of 1/4 In hardware. Sold each.

Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4 In, 1 In, 1-1/8 In, 1-1/4 In, 1-1/2 In 1-5/8 In and 1-3/4 In.

Tungsten steel taps are titanium coated. Economy taps are available in right-hand and left-hand threads.

2 In O.D. twist lock discs are great for cleaning gasket material or paint from parts and surfaces. Use with ALL12100 twist lock backing pad (sold separately). Package of 5

Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4 In, 1 In, 1-1/8 In, 1-1/4 In, 1-1/2 In 1-5/8 In and 1-3/4 In.

Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4 In, 1 In, 1-1/8 In, 1-1/4 In, 1-1/2 In 1-5/8 In and 1-3/4 In.

Tungsten steel taps are titanium coated. Economy taps are available in right-hand and left-hand threads.

Tungsten steel taps are titanium coated. Economy taps are available in right-hand and left-hand threads.

Black anodized two-piece aluminum bracket clamps around tubing with 5/16 In hex head fasteners and has a 1/2 In-13 tapped hole on each side. Mounting stud and nut sold separately.

For use with quick turn fasteners, place transfer punch in a weld plate or body panel. Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled.

These tools provide the professional quality dimple necessary for flat head button applications

Cleco Fasteners are reusable and easily make a temporary connection between pieces of sheet metal during fitting.

These tools provide the professional quality dimple necessary for flat head button applications

Twist lock backing pad accepts 2 In twist lock style cleaning or sanding discs and features a 1/4 In arbor to work with most drills or 90 degree die grinders. Pad is rated up to 30,000 rpm.

Transfer your hole location to your work surface with this handy tool. simply slip this into the tab hole and lay your work material on top. With a light tap, your hole location will be transfered

Flap discs for 4-1/2 In grinders with a 7/8 In arbor quickly remove rust and other coatings from a variety of metal, stainless and steel surfaces. Ideal for grinding welds or preparing materials for welding. Sold each.

Tungsten steel taps are titanium coated. Economy taps are available in right-hand and left-hand threads.

Alloy steel taps work well for chasing and cleaning threads before installing fittings and plugs.

Double ended bits are basically two bits in one. Convenient bit can be flipped around for a fresh sharp bit when drilling panels for Cleco fasteners or rivets. Package of 6.

Durable air riveter speeds up assembly and quickly fastens steel or aluminum rivets into various materials. Includes nose pieces for 3/32 In, 1/8 In, 5/32 In and 3/16 In rivets.

Spring steel punches place a 1/4 In diameter hole 1/2 In from the end of Allstar 1 In x.062 In thick spring steel material. Built-in stop positions material for accurate hole placement. ALL23116, placed on a hard surface, can be struck lightly with a 3 to 4lb. hammer. ALL23117 may be placed in a vise, or handheld and impact driven, using a 3/4 In socket to punch spring steel mounted to race car.

Spring steel punches place a 1/4 In diameter hole 1/2 In from the end of Allstar 1 In x.062 In thick spring steel material. Built-in stop positions material for accurate hole placement. ALL23116, placed on a hard surface, can be struck lightly with a 3 to 4lb. hammer. ALL23117 may be placed in a vise, or handheld and impact driven, using a 3/4 In socket to punch spring steel mounted to race car.

Digital level with magnetic base measures the angle of a single straight surface or the angle of a joint between two straight surfaces. Displayed value on the LCD screen rotates to right side up when digital level is in an upside down position. Powered by three 3V CR2032 batteries (included). 2 In x 2 In x 1 In.

Make smooth radius curves and con-tours with Allstar fts shrinker/stretcher combo. Shrinker creates inside curves and stretcher expands for outside curves. Each completely assembled tool includes a handle and mounting hardware for securing to a work bench. Tools are capable of forming 8 gauge mild steel, 16 gauge aluminum and 20 gauge stainless. Kit is great for forming fenders, radiator shrouds, or any item needing a smooth radius curve.

Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359 In) steel or 18 gauge (.0403 In) aluminum. Hole size is increased about 1/8 In when hole is flared.

Adapter is for reversible cordless drills and greatly speeds up the installation of Inblind In rivets commonly used when building race car bodies. Tool is a real hand and time saver compared to hand operated rivet guns and is designed for use with all rivets up to 3/16 In including 3/16 In aluminum mandrel rivets but not recommended for 3/16 In steel mandrel rivets. Adapter includes nose pieces for installing 3/32 In, 1/8 In, 5/32 In and 3/16 In rivets.

Make smooth radius curves and con-tours with Allstar fts shrinker/stretcher combo. Shrinker creates inside curves and stretcher expands for outside curves. Each completely assembled tool includes a handle and mounting hardware for securing to a work bench. Tools are capable of forming 8 gauge mild steel, 16 gauge aluminum and 20 gauge stainless. Kit is great for forming fenders, radiator shrouds, or any item needing a smooth radius curve.

This handy highside body roller will allow you straighten body and deck panels while still on your car! Must have item for at track repairs.

Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4 In, 1 In, 1-1/8 In, 1-1/4 In, 1-1/2 In 1-5/8 In and 1-3/4 In.

Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359 In) steel or 18 gauge (.0403 In) aluminum. Hole size is increased about 1/8 In when hole is flared.

Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359 In) steel or 18 gauge (.0403 In) aluminum. Hole size is increased about 1/8 In when hole is flared.

Replacement jaws for the Allstar Pneumatic Rivet Gun

Includes interchangeable nose pieces for 3/32 In, 1/8 In, 5/32 In, and 3/16 In dia. rivets.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact, deburr and chamfer while drilling and do not require a center punch. Titanium nitride coated high speed steel. 1/4 In shank.

Cleco Pins are temporary fasteners that can easily be installed or removed in 1/4 In holes when fitting sheet metal or chassis tabs using the ALL18220 Cleco Pliers. 1/4 In size pin is ideal to use in place of body bolts or other 1/4 In fasteners. Package of 10

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

Never lose another race because of loose bolts. Rugged pliers have an end bearing for smoother, faster twisting, especially in tight areas where a second pull is needed.

Cleco pins are reusable and easily make a temporary connection between pieces of sheet metal during fitting. Pins will work with thicknesses up to 1/4 In. Kits include 10pcs.

Level base simplifies notching and bending of round tubing and helps ensure accuracy. Base fastens to standard ballast or weight brackets and clamps to the tube as a reference point when creating parallel, perpendicular, any angle of opposing notches or bends during fabrication. Base accepts most digital levels including ALL10113, ALL10742 and ALL10744 or standard bubble levels.

Bolt to trailer or garage wall to hold cans up to 3 In in diameter. Sturdy steel construction is pre-painted white.

Cleco pins are reusable and easily make a temporary connection between pieces of sheet metal during fitting. Pins will work with thicknesses up to 1/4 In. Kits include 10pcs.

Bolt to trailer or garage wall to hold cans up to 3 In in diameter. Sturdy steel construction is pre-painted white.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

A hundred uses in the shop or at the track. True Racers Tape.

Stainless steel wire is.032 In dia., 1 lb. spool.

Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359 In) steel or 18 gauge (.0403 In) aluminum. Hole size is increased about 1/8 In when hole is flared.

Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359 In) steel or 18 gauge (.0403 In) aluminum. Hole size is increased about 1/8 In when hole is flared.

Cleco pins permit quick, easy installation and removal of sheet metal during fitting. Pins work with thicknesses up to 1/4 In.

Ensure that chassis tubing is level and plumb when building roll cages or checking driveshaft angles. Also works on trailing arms and suspension tubes when used with ALL10740 Smart Tool Tray. A Inhold In button freezes and unfreezes readings which can be displayed as degrees, percentages, or in./ft. at the push of a button. Plus and minus signs indicate when pitch is more or less than that shown on the display. Pitch reads in 1/8 in./ft. increments. Listen and level emits an audible Inbeep In at level and plumb. The tool shuts off automatically if idle for more than six minutes. Powered by a standard 9 volt battery.

Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359 In) steel or 18 gauge (.0403 In) aluminum. Hole size is increased about 1/8 In when hole is flared.

Quickly set steel and aluminum rivets anywhere without the need of an air compressor. Kit includes 3/32 In, 1/8 In, 5/32 In and 3/16 In nose pieces, 3 in 2 spanner wrench, (2) 14.4 volt li-ion batteries, charger and plastic carrying case.

Digital level with powerful magnetic base measures the angle of a single straight surface or the angle of a joint between two straight surfaces. Displayed value on the LCD screen rotates to right side up when level is in an upside down position. Powered by three 3V CR2032 batteries (included). 6 In x 2.25 In x 1.25 In.