CLEVISES for Super Beetle Convertible 1978

WELD IN SLOT CLEVIS INSERT
Sold: Pair

Quantity: Sold Each
slot width 3/4
Height: 1 11/16 inches

Mild steel bracket to mount to a heim joint. Useful for steering and suspension. 3/8 inches holes, 1/8 inches thick with 1/2 inches gap between sides. Hole measures 1-1/8 inches from bottom to hole center.
Quantity: Sold Each

Radiused clevis bracket sits down on 1-1/2 inches tubing. 1/4 inches holes, 1/8 inches thick, 1 inches gap between sides, 1 inches hole center from the bottom.
Radius: 1 1/2 inches

Heim joint clevis for 1/2 inches heim. 3/16 inches thick, 1/2 inches holes, 5/8 inches gap between sides.
Quantity: Sold Each
Height: 1 5/8 inches

Mild steel clevis link bracket. 1/2 inches side holes, 3/16 inches thick, 1 inches between sides, 5/8 inches bottom hole to add weld or thru bolt.
Thickness: 3/16 inches

Quantity: Sold Each
Thickness: 3/16 inches

Weld on mount for suspension limiting clevis. Sold as a pair

Quantity: Sold Each
Hole Diameter: 1 x 3/4 inches
Thickness: 1/8 inches

Quantity: Sold Each
Width: 1 9/16 inches

Clevises are commonly used with a ball joint holder when building upper control arm or with strut style lower control arm when attaching suspension tube for a strut rod.

Clevises are commonly used with a ball joint holder when building upper control arm or with strut style lower control arm when attaching suspension tube for a strut rod.