OIL COOLERS STOCK for Type 3 Fastback 1969

Oil cooler for early vw. This cooler fits inside the fan shroud next to the fan. If your oil cool sits in a small housing on the front side of the shroud, we call that a inches doghouse inches and you will need to get the late style cooler
Beetle Type 1: 61-70
Bus Type 2: 60-70
Ghia: 61-70

Oil Cooler for doghouse style upright engines.
This was used on 1971+ Type 1s, and 1971 Type 2s. This cools the oil a lot better than the inches In Shroud inches earlier model cooler, because it doesn't block the fans air flow to the jugs.
To use this cooler you need the oil cooler adapter, which moves the cooler to the front side of the shroud. This is standard on later models. Also the fan shroud MUST be a inches doghouse inches style and have a small tin area attached to the shroud the houses the cooler
Ghia: 71-74

Late style oil cooler for Type 2 & 4 VW with 1700-2000cc engines
The VW Oil Cooler fits 1972 through 1979 Type 2 Bus models and 1980 through 1983 Vanagon air cooled engines. The oil cooler bolts to the engine case next to the number 4 cylinder.
Aluminum version

The do-it-yourselfer is provided all the parts required to block off the stock oil cooler system and reroute oil to a cooler or filter of his choice. Kit includes precision die cast block adapter and mounting hardware. For dog house.
113-117-303

8x10mm Stepped OD, Required for Replacement Oil Cooler 111-117-021 E on 1945 thru 1969 models with ORIGINAL Single Relief Crankcase
This specialty kit was developed for those applications where an early Type 1 is converted to a doghouse-style oil cooler and vice-verse. Because of the tapered seal design, these seals can perform double duty for both applications. The washer/spacers insure against crushing the seals beyond their capacity
Beetle Type 1: 45-70
Bus Type 2: 50-70
Ghia: 56-70

High quality replacement seals for use with stock oil cooler or bypass adapter.
Step Style oil cooler seals are used when running a late oil cooler on and early case or an early oil cooler on a late case. The seals have the late model 10mm size ring on one side, and the early 8mm ring size on the other allowing the conversion.
111-117-151B

High quality replacement seals for use with stock oil cooler or bypass adapter.
111-117-151B.

Oil Cooler Seal, 8x8 mm, Non-Doghouse Upright Engines, 111-117-151. Oil cooler seals are confusing. This is the seal used on in the shroud non-doghouse coolers, up through the 1970 models in the USA. If you use the wrong seal you might disable the cooler! You need 2 of these to do one cooler
Engine: 1500-1600cc 40 hp VW
Year Range: 1961-1970
Size: 8mm

Oil cooler seal for aircoole vw engines. This seal fits the late style offset coolers
The Late Model VW Oil Cooler Seal is a stepped seal with 16mm OD rings on either side of the seal and are used on late model, dual relief engine cases. The oil cooler seal mounts between the oil cooler and the case adapter and the adapted and the case on 1971 through 1977 Standard Beetles, 1971 through 1979 Super Beetles and 1971 Type 2 Bus models which will use a total of 4 seals. The oil cooler seal mounts between the oil cooler and the case on 1971 through 1973 Type 3s, 1972 through 1979 Type 2 Bus models and 1980 through 1983 Vanagons which will use 2 seals.
Beetle Type 1: 71-79
Quantity: Sold Each