BUMP STOPS for Type 3 Notchback 1962

Urethane Snubber (BLACK) To Replace The Factory Rubber Ones On a Stock King/Link Pin Front Suspension. Sold Each

OD: 1.572
Width: .600 inches
Quantity: Sold Each.

Rear suspension stop oem replacement

Sold Each
Fitment
Beetle Type 1: 60-79
Ghia: 60-74
Type 3: 64-73

Urethane Snubbers (RED) To Replace The Factory Rubber Ones On a Stock King Link Pin Front Suspension.

Do not run without these on your car or your shock will become your bump stop and damage the inner pistons and seals of the shock.

Sold as a pair.

Beetle Type 1: 56-65
Suspension: King Pin
Quantity: Pair

Rear suspension stop oem replacement
For Type 2 Bus

Sold Each
Fitment
Bus Type 2: 65-79

Prothane By BUGPACK
Rear suspension stop replacement
For Type 2 Bus

Sold as a PAIR
Fitment
Bus Type 2: 65-79

Urethane, Rear Bump Stops (RED)

Replaces The Factory Rear Rubber Bump Stops On Type 1 beetle I.R.S And Swing Axle Suspension.

These will work for all years bug.

Don't let your suspension bottom out on the shock, it will do damage to the internal pistons and seals. Make sure you have bump stops in place

Sold as a Pair.

Beetle Type 1: All Years
Location: Rear Suspension
Quantity: Sold as a Pair

BUGPACK BRAND

Urethane Rectangle Bump Stops.

Universal Design With Molded In Stud w/ Nut.

Don't let your suspension bottom out on the shock, it will do damage to the internal pistons and seals. Make sure you have bump stops in place

Fitment: Universal
Material: PROTHANE
Quantity: Sold as a Pair

Dimensions 7/8 x 1-7/8 x 1-3/8.

BUGPACK BRAND

Urethane Rectangle Bump Stops with curved buttom to bump a tube nicely

Universal Design With Molded In Stud w/ Nut.

Don't let your suspension bottom out on the shock, it will do damage to the internal pistons and seals. Make sure you have bump stops in place

Fitment: Universal
Material: PROTHANE
Quantity: Sold as a Pair

Dimensions 7/8 x 1-7/8 x 1-3/8.

BUGPACK BRAND

Urethane Rectangle Bump Stops with curved buttom to bump a tube nicely

Universal Design With Molded In Stud w/ Nut.

Don't let your suspension bottom out on the shock, it will do damage to the internal pistons and seals. Make sure you have bump stops in place

Fitment: Universal
Material: PROTHANE
Quantity: Sold as a Pair

Dimensions 7/8 x 1-7/8 x 1-3/8.

Red Urethane, Round, Stacked Bump Stops. Universal Design w/ Molded In Stud And Nut. These will mount anywhere that you can put either a tab or a tapped hole. 2 diameter at the base and about 2 high. uses 3/8 stud, 3/4 long with nylon lock nut. 2 Pack. Don t let your suspension bottom out on the shock, it will do damage to the internal pistons and seals. Make sure you have bump stops in place Material: Urethane Mounting: Threaded Bolt & Nut Quantity: Sold as a pair

Urethane Rectangle Bump Stops.

Universal Design With Molded In Stud w/ Nut.

Don't let your suspension bottom out on the shock, it will do damage to the internal pistons and seals. Make sure you have bump stops in place

Fitment: Universal
Material: Urethane
Quantity: Sold as a Pair

Weld on bump stop holders for Fox or Kings.

Fits 2 inch hydraulic stops

Bugpack Prothane, Rear Bump Stops (RED)

Replaces The Factory Rear Rubber Bump Stops On Type 1 beetle I.R.S And Swing Axle Suspension.

These will work for all years bug.

Don't let your suspension bottom out on the shock, it will do damage to the internal pistons and seals. Make sure you have bump stops in place

Sold as a Pair.

Beetle Type 1: All Years
Location: Rear Suspension
Quantity: Sold as a Pair