SPRING PLATES, IRS for Type 3 Notchback 1968

Stock replacement IRS spring plates. Made for 24-11/16 inches torsion bars. Requires 1 3/4 inches I.D. inner bushings & 1 7/8 inches I.D. outer bushings. SOLD IN PAIRS.

Spring plate lengths are determined by the length of the torsion bar that they are attaching to. If you look at the torsion housing and the cap at the end is solid, then you need 21-3/4. If the cap has a hole in the middle with a stub protruding, you will want to measure the bar

Transmission Style: IRS
Torsion Bar Length: 24-11/16 inches
Quantity: 2 Pieces

Stock replacement IRS spring plates. Made for 21-3/4 inches torsion bars. Requires 1 3/4 inches I.D. inner bushings & 1 7/8 inches I.D. outer bushings. SOLD IN PAIRS.

Spring plate lengths are determined by the length of the torsion bar that they are attaching to. If you look at the torsion housing and the cap at the end is solid, then you need 21-3/4. If the cap has a hole in the middle with a stub protruding, you will want to measure the bar

Transmission Style: IRS
Torsion Bar Length: 21-3/4 inches
Quantity: 2 Pieces

Stock replacement irs spring plates. Made for 26-9/16 inches torsion bars. Requires 1 3/4 inches i.D. Inner bushings & 1 7/8 inches i.D. Outer bushings. SOLD IN PAIRS.

Spring plate lengths are determined by the length of the torsion bar that they are attaching to. If you look at the torsion housing and the cap at the end is solid, then you need 21-3/4. If the cap has a hole in the middle with a stub protruding, you will want to measure the bar

Transmission Style: IRS
Torsion Bar Length: 26-9/16 inches
Quantity: 2 Pieces

Stock replacement irs spring plates. Made for 24-11/16 inches torsion bars. Requires 1 3/4 inches i.D. Inner bushings & 1 7/8 inches i.D. Outer bushings. SOLD IN PAIRS.

Spring plate lengths are determined by the length of the torsion bar that they are attaching to. If you look at the torsion housing and the cap at the end is solid, then you need 21-3/4. If the cap has a hole in the middle with a stub protruding, you will want to measure the bar

Transmission Type: IRS
Torsion Bar Length: 24-11/16 inches
Quantity: 2 Pieces

Heavy Duty IRS, spring plates to replace single spring plate models, Type 1 1972 and above)

Made for 26-9/16 inches torsion bars. Requires 1 3/4 inches I.D. Inner bushings & 1 7/8 inches I.D. Outer bushings. SOLD IN PAIRS.

Spring plate lengths are determined by the length of the torsion bar that they are attaching to. If you look at the torsion housing and the cap at the end is solid, then you need 21-3/4. If the cap has a hole in the middle with a stub protruding, you will want to measure the bar

Transmission Style: IRS
Torsion Bar Length: 26-9/16 inches
Quantity: 2 Pieces

Fitment
Beetle Type 1: 1972 & above