WIRE WRAP & HOLD DOWNS for Type 3 Notchback 1972

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

Split loom wrap is easily applied over existing hoses or wiring to conceal and protect against wear or abrasion. Wrap features a 25 percent overlap based on the nominal size listed, allowing the wrap to bend and flex without opening. Polyethylene material is heat resistant up to 250 degrees and easily cuts with a hot knife or a soldering iron with knife attachment.

Loom keeps wiring bundled together for a neat appearance and can be easily removed when adding or removing wires during wiring harness changes. Open design makes identifying or locating a wire simple and will not hold dirt and moisture like solid looms. Loom also provides provide abrasion resistance to protect wiring or hoses. High density polyethylene material is rated from -30 F to 165 F and sold in 10 ft. lengths.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

Split loom wrap is easily applied over existing hoses or wiring to conceal and protect against wear or abrasion. Wrap features a 25 percent overlap based on the nominal size listed, allowing the wrap to bend and flex without opening. Polyethylene material is heat resistant up to 250 degrees and easily cuts with a hot knife or a soldering iron with knife attachment.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Loom keeps wiring bundled together for a neat appearance and can be easily removed when adding or removing wires during wiring harness changes. Open design makes identifying or locating a wire simple and will not hold dirt and moisture like solid looms. Loom also provides provide abrasion resistance to protect wiring or hoses. High density polyethylene material is rated from -30 F to 165 F and sold in 10 ft. lengths.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

Split loom wrap is easily applied over existing hoses or wiring to conceal and protect against wear or abrasion. Wrap features a 25 percent overlap based on the nominal size listed, allowing the wrap to bend and flex without opening. Polyethylene material is heat resistant up to 250 degrees and easily cuts with a hot knife or a soldering iron with knife attachment.

Split loom wrap is easily applied over existing hoses or wiring to conceal and protect against wear or abrasion. Wrap features a 25 percent overlap based on the nominal size listed, allowing the wrap to bend and flex without opening. Polyethylene material is heat resistant up to 250 degrees and easily cuts with a hot knife or a soldering iron with knife attachment.

Split loom wrap is easily applied over existing hoses or wiring to conceal and protect against wear or abrasion. Wrap features a 25 percent overlap based on the nominal size listed, allowing the wrap to bend and flex without opening. Polyethylene material is heat resistant up to 250 degrees and easily cuts with a hot knife or a soldering iron with knife attachment.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

Loom keeps wiring bundled together for a neat appearance and can be easily removed when adding or removing wires during wiring harness changes. Open design makes identifying or locating a wire simple and will not hold dirt and moisture like solid looms. Loom also provides provide abrasion resistance to protect wiring or hoses. High density polyethylene material is rated from -30 F to 165 F and sold in 10 ft. lengths.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.

Aluminum clamps have a protective neoprene cushion to prevent abrasion and a 1/4 In mounting hole to secure electrical wiring, hoses or cables to a panel or frame.

High temperature silicone coated fiberglass sleeving is non-flammable and resists temperatures up to 500° F. An excellent choice for protection of fuel lines, wiring, cables and various similar uses. Sleeving is resistant to gasoline and many other chemicals. Sold in 3ft. lengths. Size referenced is sleeve I.D. or O.D. of hose to be covered.