MASTER CYLINDERS for Type 3 Squareback 1963

Replacement master cylinder for cnc, neal or latest rage pedals. 5/8 inches bore.
Round cylinders are best in situations were only 2 wheel brakes are needed.
These take a 1/8th NPT fitting for the brake line connection.
You will need to know if you are using either a 3/16 SAE line or a Metric 10mm and then purchase the correct adapter fitting from us.
Mounting holes are 2-1/4 inches on center and a 12 to 6 orientation
Length: 4 inches - 8-3/4 inches total
Bore: 5/8 inches

Replacement master cylinder for cnc, neal or latest rage pedals. 3/4 inches bore.
These take a 1/8th NPT for the brake line connection.
Bore: 3/4 inches

5/8 bore, master cylinder. Rectangular tall style. Fits most pedal kits. NOTE: Fitting size is 1/8 NPT (pipe fitting) and does require an adapter to connect the line. You will need to determine what type of line you will be using to order the proper adapter. Rectangular master cylinders are what is needed for a 4 wheel brake system. They will also work for 2 wheel. Mounting holes are 3 on center in a 12 to 6 configuration. USE WITH DOT 3 BRAKE FLUID ONLY. Sold Each Brand: Latest Rage Master Type: Rectangular, Tall Bore Size: 5/8

Replacement rectangular master cylinder for cnc, neal or latest rage pedals. 5/8 inches bore. Fitting size is 1/8 inches npt and does require an adapter to connect the line.
Rectangular master cylinders are what is needed for a 4 wheel brake system. They will also work for 2 wheel.
Mounting holes are 3 inches on center in a 12 to 6 configuration
Height: 4-1/2 inches
Bore: 5/8 inches

Replacement rectangular master cylinder for cnc, neal or latest rage pedals. 3/4 inches bore. Mounting holes are 2 1/4 on center in a 12 to 6 configuration. USE WITH DOT 3 BRAKE FLUID ONLY. Height: 4-1/2 inches Length: 9 inches Bore: 3/4 inches

7/8 inches master cylinder. Economy line. Rectangular tall style. Fits most pedal kits. Large version. Polished. Fitting size is 1/8 inches npt and does require an adapter to connect the line.
Bore Size: 7/8 inches

3/4 inches master cylinder. Economy line. Rectangular tall style. Fits most pedal kits. Large version. Fitting size is 1/8 inches npt and does require an adapter to connect the line.
Mounting holes are 3 inches on center in a 12 to 6 configuration. USE WITH DOT 3 FLUID ONLY.
Master Type: Rectangular Tall
Bore Size: 3/4 inches

Replacement rectangular master cylinder for cnc, neal or latest rage pedals. 7/8 inches bore.
Master has a 1/8 inches NPT outlet for a single brake line.
Mounting holes are 3 inches on center in a 12 to 6 configuration. USE WITH DOT 3 BRAKE FLUID ONLY.
Bore: 7/8 inches

7/8 inches master cylinder. Economy line. Rectangular tall style. Fits most pedal kits. Large version. Fitting size is 1/8 inches npt and does require an adapter to connect the line.
Bore Size: 7/8 inches

Replacement master cylinder for cnc, neal or latest rage pedals. 5/8 inches bore. Polished.


Round cylinders are best in situations were only 2 wheel brakes are needed.

These take a 1/8th NPT fitting for the brake line connection.


Mounting holes are 2-1/4 inches on center and a 12 to 6 orientation


Length: 4 inches - 8-3/4 inches total

Height: 3-1/2 inches
Bore: 5/8 inches
You will need to know if you are using either a 3/16 SAE line or a Metric 10mm and then purchase the correct adapter fitting from us.

Replacement master cylinder for cnc, neal or latest rage pedals. 3/4 inches bore. Polished.
Bore: 3/4 inches

Replacement rectangular master cylinder for cnc, neal or latest rage pedals. 5/8 bore. Polished. Fitting size is 1/8 npt and does require an adapter to connect the line. Mounting holes are 3 on center in a 12 to 6 configuration CLOSEOUT ITEM: ONCE INVENTORY IS GONE, THEY WILL NOT BE AVAILABLE ANY LONGER Height: 4-1/2 Length: 9 Bore: 5/8

5/8 inches master cylinder. Economy line. Rectangular tall style. Fits most pedal kits. Tall version. Polished.
Fitting size is 1/8 inches npt and does require an adapter to connect the line.



Rectangular master cylinders are what is needed for a 4 wheel brake system. They will also work for 2 wheel.

Master has a 1/8 inches NPT outlet for a single brake line.

Mounting holes are 3 inches on center in a 12 to 6 configuration

Master Type: Rectangular

Bore Size: 5/8 inches

Replacement rectangular master cylinder for cnc, neal or latest rage pedals. 3/4 inches bore. Polished.

Mounting holes are 3 inches on center in a 12 to 6 configuration




Height: 3-1/2 inches

Bore: 3/4 inches

3/4 inches master cylinder. Economy line. Rectangular tall style. Fits most pedal kits. Large version. Polished. Fitting size is 1/8 inches npt and does require an adapter to connect the line.
CLOSEOUT ITEM
Bore Size: 3/4 inches

Master Cylinder - High Volume - 3/4 in Bore - 1.430 in Stroke - Integral Reservoir - Aluminum - Natural - Kit

Master Cylinder - High Volume - 1 in Bore - 1.43 in Stroke - Integral Reservoir - Aluminum - Natural - Kit

Master Cylinder - GS Compact - 0.750 in Bore - 1.25 in Stroke - Integral Reservoir - Aluminum - Black Anodize - Kit

Master Cylinder - GS Compact - 0.625 in Bore - 1.25 in Stroke - Integral Reservoir - Aluminum - Black Anodize - Kit

Pressure bleed lid for round cnc master cylinders. Simplifies brake bleeding
Brand: CNC
Quantity: Sold Each

Quick fill top for cnc and latest rage rectangular master cylinders. Cap unscrews for easy fills. Comes complete with gaskets and cap
Pedals: CNC or EMPI
Material: Aluminum

Replacement boot for cnc short or tall master cylinders
Big End: 1.15
Small End; .255
Length: 2.38

Replacement boot for cnc master cylinder. Will also fit most slave cylinders
Large End ID: 1-1/8 inches
Small End ID: 5/16 inches
Length: 2-1/8 inches