PUSHROD TUBES & SEALS for Type 3 Squareback 1964

Change damaged or leaking push rod tubes in minutes without removing the engine or heads.
Quantity: 8 Pieces

This style eliminates the need for jam nuts by using a strong spring to provide tension on the seal.
Made of tough aluminum and anodized for long life.
The spring loaded design also allows you to quickly change damaged or leaking push rod tubes with the engine in the car. The heavy duty spring keeps a constant tension for a positive seal. Made from heavy duty aluminum and fully blue anodized for good looks and protection from the elements. Fits 1200-1600cc.
Quantity: 8 Pieces

The heat resistant high impact design nylon is an economical alternative to the aluminum self-adjusting push rod tube and offers the same benefits.
Black, fits all 12-1600cc.
INCLUDES SEALS
Quantity: 8 pieces

JayCee's famous leak-proof pushrod tubes. Our tubes are installed on air cooled engines all over the world! With a larger inside than stock, they help clear pushrods from interferance. Made from 6061 extruded aluminum and CNC machined in house our tubes are the finest made. The kit includes 8 complete two piece tubes, 8 double ground springs, an internal buna o-ring kit and 8 retainer washers.

JayCee's famous leak-proof pushrod tubes. Our tubes are installed on air cooled engines all over the world! With a larger inside than stock, they help clear pushrods from interferance. Made from 6061 extruded aluminum and CNC machined in house our tubes are the finest made. The kit includes 8 complete two piece tubes, 8 double ground springs, an internal buna o-ring kit and 8 retainer washers.

JayCee's famous leak-proof pushrod tubes. Our tubes are installed on air cooled engines all over the world! With a larger inside than stock, they help clear pushrods from interferance. Made from 6061 extruded aluminum and CNC machined in house our tubes are the finest made. The kit includes 8 complete two piece tubes, 8 double ground springs, an internal buna o-ring kit and 8 retainer washers.

JayCee's famous leak-proof pushrod tubes. Our tubes are installed on air cooled engines all over the world! With a larger inside than stock, they help clear pushrods from interferance. Made from 6061 extruded aluminum and CNC machined in house our tubes are the finest made. The kit includes 8 complete two piece tubes, 8 double ground springs, an internal buna o-ring kit and 8 retainer washers.

Replacement stock style stainless steel pushrod tubes. Set of 8.
Fits 1300-1600cc.
Quantity: 8 Pieces

Made by Scat enterprises. These larger diameter spring loaded tubes are perfect for any larger stroker engine with or without hi-lift rocker arms. They adjust to any width engine and with there dual o-ring design, provide the best sealing of any adjust tube on the market.;Eliminates pushrod rubbing against tube walls;Spring loaded for sealing tension + easy installation;6061-T6 sleeves are sealed together with Viton O-rings;Clearanced for high lift camshafts and rockers;20% Bigger in diameter than stock;We offer a wide variety of adjustable and spring loaded push rod tubs set from a number of suppliers.;Click here to view all options.

EMPI's Stainless Steel VW Windage Pushrod Tube Set is made with a longer reaching portion that sticks further into the engine case. The longer windage tube helps to prevent oil from pouring into the valve cover during hard cornering or off roading. The stainless steel tubes will resist rust and corrosion and fit 1300 through 1600cc engines which were original in 1966 through 1977 Standard Beetles, 1971 through 1979 Super Beetles, 1966 through 1974 Karmann Ghias, 1963 through 1971 Type 2 Bus models, 1962 through 1973 Type 3s and 1973 through 1974 Things. The stainless steel windage tubes are sold as a complete set of 8.
Complete set of 8.
Material:
Quantity: 8 Pieces

Stock replacement steel pushrod tube.
Fits 25-36hp vw engines. Sold each.
Type: Stock Style 25-36hp
Quantity: Sold Each

Push Rod Tube, 40hp (1200cc), 113-109-335 is a nice quality push rod tube. These should be expanded prior to installation, so they put outward pressure on the seals for a dry engine. ONLY use Genuine Silicone Push rod Tube Seals for longest leak-free life
Be sure to install these with the welded seam inches UP inches .
You can also use these 40hp tubes on 1600cc based engines that are narrower than stock due to fly cutting and more compression since 40hp tubes are shorter than 1300-1600cc tubes!
SOLD EACH

Replacement pushrod tube. Windage style. This keeps the oil out of the tubes during cornering. Works on all Type 1 VW engines 1300cc and up.
SOLD EACH

Stock replacement steel pushrod tube.
Fits 1300-1600cc. Sold each.
Quantity: Sold Each

Stock replacement steel pushrod tube.
For Type 2. Sold each.
Type 2 Bus: 72-79
Vanagon: 80-83
Quantity: Sold Each

Change damaged or leaking push rod tubes in minutes without removing the engine or heads.
Great for emergency repairs or permanent installation.
The center o-ring seal stops oil leaks.
Made from heavy duty aluminum for strength and anodized for good looks.
Fits 1200-1600cc.
INCLUDE SEALS
Type: Threaded
Quantity: Sold Each

These heat resistant material pushrod tubes are high impact resistant and will not interfere or restrict pushrod movement. Ideal for off road.
Economical enough to install on entire engine from the start.
Spring loaded fit insures leak proof seal.
Includes Seals
311-109-335ADJ
Material: Nylon
Type: Spring Loaded
Quantity: Sold Each

Eliminates pushrod rubbing against tube walls. Spring loaded for sealing tension plus easy installation. 6061-t6 sleeves are sealed together with viton o-rings. Clearanced for high lift cams and rockers. Each

This style eliminates the need for jam nuts by using a strong spring to provide tension on the seal.
Made of tough aluminum and anodized for long life.
Supplied with seals
If you are looking to keep the engine in the car while doing a simple repair this Aluminum Quick Change Push Rod Tube by EMPI will do the job. Fitted with a heavy duty spring to keep a constant seal
Quantity: Sold Each

Replacement stock style pushrod tube made from high quality stainless steel.
Fits 1300-1600cc..
DOES NOT INCLUDE SEALS
Type: Stock Style
Quantity: Sold Each

EMPI's Stainless Steel VW Windage Pushrod Tubes are made with a longer reaching portion that sticks further into the engine case. The longer windage tubes help to prevent oil from pouring into the valve cover during hard cornering or off roading. The stainless steel tubes will resist rust and corrosion and fit 1300 through 1600cc engines which were original in 1966 through 1977 Standard Beetles, 1971 through 1979 Super Beetles, 1966 through 1974 Karmann Ghias, 1963 through 1971 Type 2 Bus models, 1962 through 1973 Type 3s and 1973 through 1974 Things. The stainless steel windage tubes are sold individually.
Made of high quality stainless steel.
Quantity: Sold Each

Stock replacement pushrod tube seals. A must when taking off the heads.
This is one of the most common places the motor will leak at.
High temps will start to dry these out and they will begin cracking over time.
Enough for one complete engine
Quantity: 16 Pieces

Replacement seals for adjustable pushrod tubes.
Use these 8 seals to replace worn out or torn ones that come in a 4011 or 4012 threaded pushrod tube sets
Quantity: 8 Pieces

These o-rings replace the o-rings in our hi performance pushrod tube sets number 00-4108-0 & 00-4109-0.
Replacement O-Rings for the center of the pushrod tubes
Material: Rubber
Fits: 00-4108-0 & 00-4109-0
Quantity: 16 Pieces

High quaility pushrod tube seal for VW Type 2 Bus. Engine Case Side
Quantity: Sold Each.

High quaility pushrod tube seal for VW Type 2 Bus. Head Side
Quantity: Sold Each.

Replacement pushrod tube for 1300-1600cc vw aircooled engine.
This tube features a wide end for high lift cams and a windage end on the other side to help prevent oil leaks

Adjustable double O-ring sealed solid gold aluminum pushrod tubes

Replace all the seals and washers in your JayCee Pushrod Tubes. Complete Set

JayCee's famous leak-proof pushrod tubes. Our tubes are installed on air cooled engines all over the world! With a larger inside than stock, they help clear pushrods from interferance. Made from 6061 extruded aluminum and CNC machined in house our tubes are the finest made.
Single Pushrod Tube

JayCee's famous leak-proof pushrod tubes. Our tubes are installed on air cooled engines all over the world! With a larger inside than stock, they help clear pushrods from interferance. Made from 6061 extruded aluminum and CNC machined in house our tubes are the finest made.
Single Pushrod Tube