OIL BREATHERS for Type 3 Squareback 1972

If you value your engine then the bugpack breather system is a must. It is designed to relieve engine crankcase pressure without spillage or loss of oil from the system EMPI s complete engine VW oil breather kit is made from cast aluminum and helps reduce crankcase pressure, eliminate blow-by and oil loss. High revving modified engines require more crankcase ventilation than the stock breather can supply. With the aluminum oil breather kit the blow-by oil is collected in the foam filter and the air vapors are vented to the atmosphere. The kit includes heavy duty breather hose, plus internal baffles that include a screen mesh shelf to elevate the foam filter element. The breather box kit includes 8 feet of 1/2 oil hose, 5 vent fittings and 5 hose clamps.

Breather Hose Kit for your VW

Billet breather system. Function and form. Finish off your sand car with these polished billet breathers. Measures 9-1/2 inches wide....
3/8 npt fittings

Compact micro breather will fit just about anywhere. Billet aluminum clamps fits 1-1/2 inches tubing.
Overall height: 3 5/8 inches
Overall width: 3 1/2 inches
Tubing Diameter: 1 1/2 inches
Fitting Size: 1/4 inches NPT
Thickness: .264 inches

Compact micro breather will fit just about anywhere. Billet aluminum clamps fits 1-3/4 inches tubing.
Tubing Diameter: 1 3/4 inches
Thickness: .264 inches

12mm ID oil breather hose. Comes in 5 Meter length. Best used for oil breather and fuel tank vapors. This is braided fabric for abrasion resistance, and has a clutch braided covering which is easy to grip in order to install or remove the hose.

Replaces stock oil fillers, works on any size engine. This is a easy way to add ventilation to your engine. Chrome finish for a custom look.
Hose nipples: 2 x 1/2 inches .
Length: 3.342 inches
Width: 2.48 inches
Height: 7-1/2 inches

The EMPI dual purpose oil filler & breather includes a system of internal baffles that seperate the oil from the hot air then returns the oil back into the engine. It mounts upright on the alternator stand making for easy oil filling and was designed to look like part of the engine. The billet aluminum filler cap seals with an o-ring seal and the button head allen top screws. Vent your valve covers, crankcase and air cleaners. Comes with attaching nut, o-rings, gaskets and instructions

Chrome canister breather is a easy way to vent your motor. 4 port hook-up allows for plenty of lines from the motor. 1-1/2 inches billet clamp makes for easy installation. Measures 5-1/4 inches tall
Height: 5-1/4 inches
Ports: 4

This breather will fit on the end of the alternator stand or any 3/8 pipe fitting. Works great for venting your motor. Chrome shield adds both a custom look and protection

This center mount breather will fit on the end of the alternator stand or any 1/2 inches hose barb. Works great for venting your motor
Height (Filter): 1 1/2 inches
Height (Overall): 2 1/8 inches

Gauze Element Breather With Chrome Top. Fits Breather Tube Or Other Universal Applications. 1/2 inches I.D
1/2 inches I.D.

Filter element to replace the elements in out tower style breather kits

Replacement breather element for our billet oil breather system. Chrome shield and washable gauze element to help keep the dirt out of your engine. Sold each

This breather hose from EMPI has a 1/2 inside diameter and comes in 8 foot lengths. This hose is not designed for high pressure applications and only fits stock VW motors as a crank case breather hose, which connects the oil filler neck to the air cleaner. This product fits Standard Beetle through 1977, Super Beetle through 1979, Karmann Ghia through 1974, all Type 3s through 1973, and all Thing models.

Empi pre-filters feature a patented inches micro mesh inches nylon filtration system that stops sand and dirt before it gets to your air cleaner element. Elastic base stretches over your air cleaner for a snug fit with no air restriction to speak of. It installs with virtually no carb adjustment. For p/n: 16-2049-0/16-2050-0 billet breathers, black

Extra large capacity for large high performance engines. All boxes are 8-3/4 inches long and 4-1/2 inches tall. Setup for #8 an fittings


Length: 8-3/4 inches
Height: 4-1/2 inches

Fitting Size: -8

Breather - Clamp-On - Round - 5/8 in OD Tube - Reusable - Rubber / Steel - Black / Chrome - Each

Aluminum breather tanks are 11-1/2 In x 3 In, include mounting bracket, clamp on breather element, drain, and one or two 3/8 InNPT bung(s). ALL36109 can vent two systems. Ideal for dry sumps and rear ends.

Aluminum breather tanks are 11-1/2 In x 3 In, include mounting bracket, clamp on breather element, drain, and one or two 3/8 In NPT bung(s). ALL36109 can vent two systems. Ideal for dry sumps and rear ends.

Small capacity, spun aluminum tank will vent dry sump tank, transmission or rear end. Tank has a 1/4 InNPT bung on bottom and a clamp style bracket for mounting to chassis tubing.

Small capacity, spun aluminum tank will vent dry sump tank, transmission or rear end. Tank has a 1/4 InNPT bung on bottom and a clamp style bracket for mounting to chassis tubing.

Small capacity, spun aluminum tank will vent dry sump tank, transmission or rear end. Tank has a 1/4 InNPT bung on bottom and a clamp style bracket for mounting to chassis tubing.

Breather Tank - 3 in Diameter x 11-1/2 in Tall - 3/8 in NPT Female Inlet - Aluminum - Natural - Each