THROW-OUT SHAFTS for Type II Bus Bus 1955

Clutch cable arm, Type 1 1961-1971 and all 002 Type 2 Transmission.
131-141-719HD
16mm cross shaft, 74.2mm center to center
Bus Type 2: All 002
Quantity: Sold Each

Clutch cable arm, Type 1 1974-79
111-141-719F
20mm cross shaft, 99.11mm center to center
Quantity: Sold Each

Clutch cable arm, Type 1 1972-74
20mm cross shaft, 86.3mm center to center
OEM NUMBER: 111-141-719HD
Quantity: Sold Each

Clutch cable arm, Type 1 1961-71
16mm cross shaft, 86.3mm center to center
Beetle Type 1: 61-71
All 002 bus transmission
Quantity: Sold Each

Clutch cable arm, FitsType 1 1976-1979 and all 091 Type 2 transmissions.
20mm cross shaft. 74.2mm center to center
361-141-719HD
Bus Type 2: All 091

Empi heavy duty cross shaftis fully welded at critical points for performance and stock applications.
Fits 1961-1970 type 1 (beetle) and type 2 (bus) up to 1967.
113-141-701CHD
Ghia: 61-70

Heavy duty cross shaft is fully welded at critical points for performance and stock applications. Fits 1971-1972 type 1 and type 3 tranmissions.
17mm Shaft size.
113-141-701E
Ghia: 71-72
Size: 17mm

All new racking throw out shafts are quanlity manufactured for direct replacement of worn, broken, or poor quality cross shafts.
15.9mm Diameter
Bus Type 2: 70-72
Quantity: Sold Each

All new racking throw out shafts are quanlity manufactured for direct replacement of worn, broken, or poor quality cross shafts.
Type 3: 71-72
Quantity: Sold Each

All new racking throw out shafts are quanlity manufactured for direct replacement of worn, broken, or poor quality cross shafts.
Quantity: Sold Each

All new racking throw out shafts are quanlity manufactured for direct replacement of worn, broken, or poor quality cross shafts.
Bus Type 2: 68-70
Quantity: Sold Each

Heavy duty cross shaft is fully welded at critical points for performance and stock applications. Fits 1968-1970 type 2 bus transmissions.
This is the shaft that your throw out bearing clips to and the clutch cable and arm twists to activate the cluch
002-141-701
Quantity: Sold Each

All new racking throw out shafts are quanlity manufactured for direct replacement of worn, broken, or poor quality cross shafts.
Bus Type 2: 71-75
Quantity: Sold Each

All new racking throw out shafts are quanlity manufactured for direct replacement of worn, broken, or poor quality cross shafts.
19.9mm Diameter
Quantity: Sold Each

Clutch operating lever spring for aircooled VW. Type 1 61-71, ghia 61-71, type 2 61-75.
This is the spring that helps keep your throw out bearing and clutch pedal were they belong. A worn out spring will cause a burnt up clutch and a pedal that doesn't allways return.
113-141-723
Bus Type 2: 60-75
Ghia: 61-72

Clutch operating lever spring for aircooled VW. Type 1 72-74, ghia 72-74.
113-141-723C
Super Beetle: 72-74
Ghia: 72-74

Clutch operating lever spring for aircooled vw. Type 1 74-79.
113-141-723D
Ghia: 74-74

Use this, 16mm, Cross Shaft Bushing kit when rebuilding your transmission or just when replacing your throw-out bearing cross shaft. Includes all nessesary pieces. The main bushing utlizes an aluminum bushing with a 16mm ID plastic insert.
113-198-026
043-198-026
Beetle Type 1: 61-72
Ghia: 61-70

This cross shaft repair kit will replace the bushing, springs, and return springs on your swing axle 15.9mm throw out shaft. Bushings will wear out and become loose causing a wobble of the shaft which will start wearing out the throw out bearing. Also the springs can become weak from over extending it.
Fits the following throw out arms
18-1041-0
18-1042-0
18-1043-0
18-1044-0
Ghia: 61-70

Dust shield for your vw throw out bearing arm.
Beetle Type 1: 68-75
Bus Type 2: 68-75

Stainless Steel Dust shield for your vw throw out bearing arm.
Bus Type 2: 68-75

Stainless Steel Dust shield for your vw throw out bearing arm.
Bus Type 2: 76-79

This cross shaft repair kit will replace the bushing, springs, and return springs on your swing axle 20mm throw out shaft. Bushings will wear out and become loose causing a wobble of the shaft which will start wearing out the throw out bearing. Also the springs can become weak from over extending it.
18-1055-0
18-1054-0
Beetle Type 1: 73 & Later
Bus Type 2: 76 & Later
Ghia: 61-70

Throw out arm repair kit. Comes with everything you need to replace a existing shaft.
Ghia: 61-70