SPRING PLATE GROMMETS for Type II Bus Bus 1958

These are designed to fit aftermarket spring plates that ARE NOT ADJUSTABLE. If you have standard style spring plates, these are your guys.

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

All Aftermarket Spring Plates
Inside Diameter: 1-3/4 inches
Quantity: 2 Pieces

BUGPACK BRAND
These are designed to fit aftermarket spring plates that ARE NOT ADJUSTABLE. If you have standard style spring plates, these are your guys.

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

All Aftermarket Spring Plates
Inside Diameter: 1-3/4 inches
Quantity: 2 Pieces

BUGPACK BRAND
Re-Designed spring plate grommets constructed of a softer Polyurethane compound. Less noise and better wear.

These are designed to fit aftermarket spring plates that ARE NOT ADJUSTABLE. If you have standard style spring plates, these are your guys.

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

All Aftermarket Spring Plates
Inside Diameter: 1-3/4 inches
Quantity: 2 Pieces

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

For Type 2 55-79
and Aftermarket Spring Plate

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

For Type 2 55-79
and Aftermarket Spring Plate

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

Beetle Type 1: 50-60 INNER
Beetle Type 1: 69-79 OUTER
Type 3: 69-79 OUTER

BUGPACK BRAND
Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do. 1 7/8 inches ID. Large OD

Sold as a Pair

Beetle Type 1: 50-60 INNER
Beetle Type 1: 69-79 OUTER
Type 3: 69-79 OUTER

BUGPACK BRAND
1-7/8 Inside Small OD for Early Swing Axle.
Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do. Small OD

Sold as a Pair

Beetle Type 1: 50-60 INNER
Beetle Type 1: 69-79 OUTER
Type 3: 69-79 OUTER

BUGPACK BRAND
Re-Designed spring plate grommets constructed of a softer Polyurethane compound. Less noise and better wear.

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

Beetle Type 1: 50-60 INNER
Beetle Type 1: 69-79 OUTER
Type 3: 69-79 OUTER

BUGPACK BRAND
Re-Designed spring plate grommets constructed of a softer Polyurethane compound. Less noise and better wear.

1-7/8 Inside
Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

Sold as a Pair

Beetle Type 1: 50-60 INNER
Beetle Type 1: 69-79 OUTER
Type 3: 69-79 OUTER

Rear spring plate grommets from empi designed not to crunch and bottom out as soft stock rubber grommets do.

These grommets go on your spring plate and hold it centered.

THIS IS THE OUTER GROMMET

Sold as a Pair

Type 1 Beetle: 61-68
Inside Diameter: 1-3/4 inches
Transmission Type: Swing Axle

BUGPACK BRAND
Rear spring plate grommets from empi designed not to crunch and bottom out as soft stock rubber grommets do.

These grommets go on your spring plate and hold it centered.

THIS IS THE OUTER GROMMET

Sold as a Pair

Type 1 Beetle: 61-68
Inside Diameter: 1-3/4 inches
Transmission Type: Swing Axle

BUGPACK BRAND
Re-Designed spring plate grommets constructed of a softer Polyurethane compound. Less noise and better wear.
Rear spring plate grommets from empi designed not to crunch and bottom out as soft stock rubber grommets do.

These grommets go on your spring plate and hold it centered.

THIS IS THE OUTER GROMMET

Sold as a Pair

Type 1 Beetle: 61-68
Inside Diameter: 1-3/4 inches
Transmission Type: Swing Axle

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

These go on your spring plates to hold them centered.

1-7/8 inches ID

Sold as a Pair

Beetle Type 1: 61-79 INNER
Beetle Type 1: 50-60 OUTER
Type 3: 65-68 OUTER

BUGPACK BRAND
Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

These go on your spring plates to hold them centered.

1-7/8 inches ID

Sold as a Pair

Beetle Type 1: 61-79 INNER
Beetle Type 1: 50-60 OUTER
Type 3: 65-68 OUTER

BUGPACK BRAND
Re-Designed spring plate grommets constructed of a softer Polyurethane compound. Less noise and better wear.

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

These go on your spring plates to hold them centered.

1-7/8 inches ID

Sold as a Pair

Beetle Type 1: 61-79 INNER
Beetle Type 1: 50-60 OUTER
Type 3: 65-68 OUTER

BUGPACK BRAND
These are the grommets you would use for the inner adjustable spring plates.

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

These are meant to hold your spring plates centered.

Sold as a Pair

Adjustable Spring Plates INNER
Inside Diameter: 2 inches
Quantity: 2 Pieces

These are the grommets you would use for the inner adjustable spring plates.

Rear spring plate grommets designed not to crunch and bottom out as soft stock rubber grommets do.

These are meant to hold your spring plates centered.

Sold as a Pair

Adjustable Spring Plates INNER
Inside Diameter: 2 inches
Quantity: 2 Pieces

Stock replacement knobby spring plate grommet. These are much softer than the urethane counterpart and do not make as much noice. Outer.

43.75 MM Inside Diameter

FITS
Type 1 69-79
Ghia 69-74
Type 3 68-73

SOLD EACH

Beetle Type 1: 68-79
Ghia: 68-74
Super Beetle: 71-79

Stock replacement knobby spring plate grommet.

46.50 MM Inside Diameter

FITS
Type 1 60-68
Ghia 60-68
Type 3 64-67

SOLD EACH

Stock replacement knobby spring plate grommet. Left/Inner, Right/Outer

46 MM Inside Diameter
FITS
Type 1 60-68
Ghia 60-68
Type 3 64-67

SOLD EACH

BUGPACK BRAND
These flanged grommets are designed to be used with custom torsion housings.

B658716 is used between the spring plate and the torsion housing and part numbers B658713, 14 ,15 respectively are used on the outboard side

Outside Dimension: 2-1/4
Inside Dimension: 1-3/4
Quantity: Pair

BUGPACK BRAND
These flanged grommets are designed to be used with custom torsion housings.

B658716 is used between the spring plate and the torsion housing and part numbers B658713, 14 ,15 respectively are used on the outboard side

Outside Dimension: 2-1/4
Inside Dimension: 1-7/8
Quantity: Pair

BUGPACK BRAND
Flange Washer Only
These flanged grommets are designed to be used with custom torsion housings.

B658716 is used between the spring plate and the torsion housing and part numbers B658713, 14 ,15 respectively are used on the outboard side

Outside Dimension: 1-7/8
Thickness: .187
Quantity: Pair

Replacement spring splate bushing for Type 2 Bus 50-79

Will work on the inner or outer side

Sold Each