BATTERY DISCONNECTS for Type II Bus Bus 1977

Sealed battery isolator

Heavy duty switch mounts in a 3/4 In hole in a panel up to 1/4 In thick and include a decal to indicate On/Off position. Switch has 1/2 In-20 terminals, is rated at 300 amp continuous duty and is sealed to resist weather and help prevent internal corrosion. Double pole switch also has 10-32 studs rated at 20amp continuous duty.

Heavy duty switch mounts in a 3/4 In hole in a panel up to 1/4 In thick and include a decal to indicate On/Off position. Switch has 1/2 In-20 terminals, is rated at 300 amp continuous duty and is sealed to resist weather and help prevent internal corrosion. Double pole switch also has 10-32 studs rated at 20amp continuous duty.

Shut down the electrical and charging system with a quick twist of the knob. Switches are available with brightly screen printed aluminum mounting panel, or on/off decal for mounting through body panel.

Shut down the electrical and charging system with a quick twist of the knob. Switches are available with brightly screen printed aluminum mounting panel, or on/off decal for mounting through body panel.

The Little Switch is rated at 100 amps continuous service and 500 amps for 10 second surges making it ideal for street rods, classics and passenger cars. In addition to preventing battery drain, this unique switch is also a cost effective anti-theft device. A rubber boot seals the neck from moisture and dirt. Competition approved by IMSA, ARCA, and SCCA.;Inexpensive Anti-theft Device;Prevents Battery Drain;Water Resistant;Removable Key

The Dual Battery Disconnect Switch allows for two batteries to operate independent of one another, or for both to be in the ON or OFF position at the same time. The FR1050 is rated for 300 Amps of continuous operation and 1000 Amps for 5 second surges. Designed for 12V and 24V systems.;12 or 24 Volts;IP 54 Rating;300 Amps Continuous @12V;150 Amps Continuous @ 24V;1000 Amps Surge for 5 Seconds @ 12v;500 Amps Surge for 5 Seconds @ 24V;Part No.;FR1050;Max Continuous Current;300 Amps;Max Surge Current;1,000 Amps (5 seconds);Environmental Protection Rating;IP54;Water Resistant;No;Operating Temperature Range;-40C to +50C / -40F to +122F;Contact Terminals;Copper;Contact Hardware;Brass;Available Stud Length;0.50;Extension Handle/Lever;No;LED On/Off Indicator;No;Lock-Out Capability;No;Max Tightening Torque;11-13 ft. lbs.;Mounting Bracket Included;No;Stud Diameter;M10;Switch Modes;4 Modes: #1 On, #2 On, Both On, Both Off;Terminal Covers Included;No;Voltage;12V/24V

Combination Battery and Alternator Kill Switch is designed to completely shut down the battery and charging system in an emergency situation. Designed to work with 12V systems and 120 Amp alternators. Ideal for racing, vehicle storage, marine, or RV applications. The main and auxiliary contacts are both controlled by the red knob. To operate, simply twist the switch knob clockwise to turn the switch on and push to turn it off. Easily mounts onto flat surfaces and panels.;Ideal for racing, vehicle storage, marine and RV applications;Prevents battery drain, theft, and reduces the risk of electrical fire;PushOff for emergency shut-down and color-coded to indicate operating position- ON or OFF, with a durable spring-loaded design;Meets IHRA, NHRA and SCCA sanctioning body requirements;Battery - 2000 Amp Surge;150 Amp Continuous;Alternator - 120 Amp;Part No.;FR1013;Max Continuous Current;150 Amps (battery) / 120 Amps (alternator);Max Surge Current;1,200 Amps (5 seconds);Environmental Protection Rating;IP65;Water Resistant;Yes;Operating Temperature Range;-30C to +60C / -22F to +140F;Contact Terminals;Silver-Plated Copper;Contact Hardware;Brass;Additional Notes;Approved for IHRA, NHRA, SCCA competition use;Available Stud Length;0.813 (approx. 13/16 in.);Extension Handle/Lever;No;LED On/Off Indicator;No;Lock-Out Capability;No;Max Tightening Torque;11-13 ft. lbs.;Mounting Bracket Included;No;Stud Diameter;M10;Terminal Covers Included;No;Voltage;12V/24V

The Big Switch with removable laser cut, stainless steel key enhances the security and safety features available with the Big Switch. This unit is rated at 250 amps continuous service and 2500 amps for 5 second intervals (12V / 24V) It is a heavy duty, waterproof switch. The removable key feature is ideal for construction, farm equipment and passenger cars. An absolutely essential theft deterrent.;Part No.;FR1009;Max Continuous Current;250 Amps;Max Surge Current;2,500 Amps (5 seconds);Environmental Protection Rating;IP65;Water Resistant;Yes;Operating Temperature Range;-40C to +80C / -40F to +176F;Contact Terminals;Silver-Plated Copper;Contact Hardware;Nickel-Plated Brass;Note: Terminals on battery disconnect switch are a live part of the electrical system and should be treated just like battery terminals. Covers are recommended, but not included. Contact vehicle manufacturer to determine proper placement and suitability to your application.

The Big Switch 500 is a heavy-duty switch which boasts a 500 Amp continuous rating due to its unique internal silver tin oxide pads and silver-plated terminals. The rugged body is made from glass-filled nylon for impact resistance and extreme temperature resistance. The Big Switch 500 can withstand extreme vibration, making it ideal for both the racing and heavy-duty trucking markets. The FR1046 comes with our standard lock-out bracket for compliance with OSHA lock-out/tag-out regulation 1910.147.;Part No.;FR1046;Max Continuous Current;500 Amps;Water Resistant;Yes;Operating Temperature Range;-40C to +80C / -40F to +176F;Contact Terminals;Silver-Tin Oxide Plated Copper;Available Stud Length;1.18 (approx. 1-3/16 in);LED On/Off Indicator;No;Lock-Out Capability;Yes;Max Tightening Torque;11-13 ft. lbs.;Mounting Bracket Included;Yes;Stud Diameter;M10;Voltage;12/24V

Battery Disconnect - Big Switch - Rotary Switch - Panel Mount - 250 amp - Lock Out Bracket - 12-24V - Kit

Battery Relocation Kit - Cable Ends / Hardware / Heat Shrink Sleeves / Zip Ties Included - 2 Gauge Cables - 20 ft Red / 8 in Black - Kit

Quickcar 55-004 Replacement Key for 55-003 Replacement key for Master Disconnect Switch with removable key (55-003)

Quickcar Plastic MDS With Removable Key 55-003 This QuickCar Battery Master Disconnect Switch is the lowest priced battery switch they offer. Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. The plastic casing makes it the lightest master disconnect carried by QuickCar, and with the capability to run on 350 continual amps @ 12V, it is still ideal for most racing applications. It features a red removable key and is designed for 3/8 In ring terminals.

Quickcar 55-55 Replacement Handle & Screw for Master Disconnect Switch Battery Disconnect Handle - Aluminum - Red - Each

Quickcar 55-002 Master Disconnect Switch w/ Alternator Posts & No Plate This QuickCar Battery Master Disconnect Switch is designed for cars using an alternator, comes without a mounting Panel, and is designed to mounted by user in the location of their choice. Includes hardware to be installed in a 3/4 In hole. Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switches have a bright red epoxy coated handle and accept 3/8 In ring terminals for battery posts, and #10 ring terminals on alternator posts. QuickCar Pt.# 55-120 is recommended for jumping current from the alternator to the battery post.

Quickcar 55-001 Battery Disconnect Switch No Plate This QuickCar Battery Master Disconnect Switch comes without a mounting Panel and is designed to mounted by user in the location of their choice. Includes hardware to be installed in a 3/4 In hole. Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switches have a bright red epoxy coated handle and accept 3/8 In ring terminals.

Quickcar 55-008 High Current Alternator Master Disconnect Switch with Flag Plate This QuickCar Battery Master Disconnect Switch comes with a checkered flag square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals for battery posts and 3/8 ring terminals on alternator posts. The heavy-duty alternator posts meet the needs for alternators producing up to 125 Amps. QuickCar Pt.# 55-121 is recommended for jumping current from the alternator to the battery post.

Quickcar 55-013 High Current Alternator Master Disconnect Switch with Black Plate QuickCar Pt.# 55-120 is recommended for jumping current from the alternator to the battery post.

Battery Disconnect - Rotary Switch - Panel Mount - 125 amp - 12V - Alternator Posts - Aluminum On / Off Panel - Silver - Each

Quickcar 55-011 Alternator Master Disconnect Switch with Black Plate This QuickCar Battery Master Disconnect Switch comes with a black square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals for battery posts and #10 ring terminals on alternator posts. QuickCar Pt.# 55-120 is recommended for jumping current from the alternator to the battery post.

Quickcar 55-012 Alternator Master Disconnect Switch with Flag Plate This QuickCar Battery Master Disconnect Switch comes with a checkered flag square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals for battery posts and #10 ring terminals on alternator posts. QuickCar Pt.# 55-120 is recommended for jumping current from the alternator to the battery post.

Quickcar 55-022 Alternator Master Disconnect Switch w/ Silver Plate This QuickCar Battery Master Disconnect Switch comes with a silver square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals for battery posts and #10 ring terminals on alternator posts. QuickCar Pt.# 55-120 is recommended for jumping current from the alternator to the battery post.

Battery Disconnect - Rotary Switch - Panel Mount - 125 amp - 12V - Removable Key - Red - Each

Quickcar 55-031 Master Disconnect Switch w/ Removable Silver Key QuickCar s newest and most advanced master disconnect switch has a lightweight black anodized aluminum casing, black mounting plate, and removable red epoxy-coated handle. The 3 stud design allows a battery, electrical system, and alternator to all be connected or disconnected so no back feeding of the electrical system occurs. All studs on this switch are designed for heavy duty 3/8 In ring terminals, and no additional jumper wires are necessary. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects, and other reproductive harm. For more information, go to www.p65warnings.ca.gov.r wiring an alternator.

Quickcar 55-021 Master Disconnect Switch with Silver Plate This QuickCar Battery Master Disconnect Switch comes with a silver square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals for battery posts.

Quickcar 55-009 Master Disconnect Switch with Flag Plate This QuickCar Battery Master Disconnect Switch comes with a checkered flag square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals.

Quickcar 55-010 Master Disconnect Switch with Black Plate This QuickCar Battery Master Disconnect Switch comes with a black square mounting Panel that measures 2-1/2x2-1/2 Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals.

Quickcar 55-005 High Current Alternator Master Disconnect Switch without Plate This QuickCar Battery Master Disconnect Switch is used for high Amp alternators, comes without a mounting Panel, and is designed to mounted by user in the location of their choice. Includes hardware to be installed in a 3/4 In hole. Most racing organizations and sanctioning bodies require these for an emergency cut-off switch. QuickCar s master disconnect switch has a bright red epoxy coated handle and accepts 3/8 In ring terminals for battery posts and 3/8 ring terminals on alternator posts. The heavy-duty alternator posts fits the needs for alternators producing up to 125 Amps. QuickCar Pt.# 55-121 is recommended for jumping current from the alternator to the battery post.

Battery Disconnect - Rotary Switch - Terminal Mount - 100 amp - 12-24V - Top Post Batteries - Each

Battery Disconnect - Battery / Magneto - Rotary Switch - Panel Mount - 250 amp - Bracket - 12-24V - Kit

The versatility of Flaming Rivers FR1052 Disconnect Switch allows for multiple installation options based upon user need and vehicle application.;Options include positive or negative electrical disconnection, positive or negative switching, continuous operator controlled remote on, and passive disconnect via vehicles ignition off. The addition of the FR1053 Time Delay Relay makes the switch suitable for vehicles requiring a Selective Catalytic Reduction cleaning cycle or other custom features.;12 Volt Electronic Battery Disconnect Switch. 24V system available upon request.;Passive Magnetic Solenoid Operation;250 Amps Continuous / 2500 Amp Surge;IP 65 Rating;Sealed Waterproof Design - Can withstand the most severe operating conditions;Ideal Protection For;Construction, & Farm Equipment / Mining & Off-Highway Vehicles;Heavy-Duty Trucks;Automotive/Racing;Marine;Momentary Push Button Switches sold separately;Part No.;FR1052;Max Continuous Current;250 Amps;Max Surge Current;2,500 Amps (3 seconds);Environmental Protection Rating;IP65;Water Resistant;Yes;Operating Temperature Range;-40C to +85C / -40F to +185F;Contact Terminals;Tin-Plated Brass;Contact Hardware;Brass;Accessories;FR1053 (3 min time delay relay)/FR1055 (6 min time delay relay);Automatic Shut-Off;Yes;Battery Disconnect Mode;Positive and Negative;Corrosion Resistance;Salt Spray Test: 300h;Internal Contacts;Silver-Plated Copper;Manual Emergency Shut-Off;No;Terminal Covers Included;Yes;Terminal Diameter;M10;Terminal Length;0.89 (approx. 57/64 in.);Tightening Torque (M10 Nuts);14.75 ft. lbs. / 20 NM;Tightening Torque (M5 Nuts);1.18 ft. lbs. / 1.6 NM;Time Delay;Yes, with Timer Relay3 minute and 6 minute (not included);Voltage;12V;Please contact us at 1-800-648-8022 before ordering to ensure proper suitability.

Top racers realize that using a low amp switch creates resistance and actually reduces power. Flaming Rivers heavy duty battery disconnect switch is top of the line designed for complex electrical systems and 16 Volt batteries.;Rated at 250 amps continuous service (12/16/24V) and 2500 amps for 5 second surges.;Spring-loaded, vibration resistant, waterproof design.;Accepted by most sanctioning bodies including IHRA/NHRA.;Furnished with an easy-grip T-handle, anodized aluminum bracket and zinc plated mounting hardware.

The lever kit allows for remote actuation of the Big Switch. The kit includes an 18 long, aluminum threaded rod, T-handle, mounting bracket and necessary hardware. A push off decal is included. The Big Switch is a heavy-duty battery disconnect switch rated at 250 Amps of continuous service in 12V, 16, and 24V systems. The Big Switch is manufactured with silver plated electrical contacts and a sealed, water resistant design that is able to withstand the most severe operating conditions.;Part No.;FR1003-2;Max Continuous Current;250 Amps;Max Surge Current;2,500 Amps (5 seconds);Environmental Protection Rating;IP65;Water Resistant;Yes;Operating Temperature Range;-40C to +80C / -40F to +176F;Contact Terminals;Silver-Plated Copper;Contact Hardware;Nickel-Plated Brass;Additional Notes;Approved for NHRA/IHRA competition use;Available Stud Length;0.775 (approx. 25/32 in.);Extension Handle/Lever;Yes;Extension Part No.;FR1006;LED On/Off Indicator;No;Lock-Out Capability;No;Max Tightening Torque;11-13 ft. lbs.;Mounting Bracket Included;Yes;Mounting Bracket Part No.;FR1007;Stud Diameter;M10;Terminal Covers Included;No;Terminal Covers Part No.;FR1003TM (pair);Voltage;12V/24V

The lever kit allows for remote actuation of the Big Switch. The kit includes an 18 long, aluminum threaded rod, T-handle, mounting bracket and necessary hardware. A push off decal is included. Accepted for IHRA/NHRA competition use.