BALL JOINT FRONT END PARTS for Type II Bus Bus 1977

Ball joint. Fits Bus 68-79
Quantity: Sold Each

Ball Joint Camber Adjusters. For Use When Lowering Your Ball Joint Front Suspension To Provide The Proper Camber. Sold In Pairs. Fits Ball Joint Front Ends Only.

Type 3 Lower Ball Joint
Quantity: Sold Each

Ball joint. Fits super beetle type 1 73-1/2 - 79.
Super Beetle: 73-1/2 - 79
Quantity: Sold Each

Ball joint. Fits Thing 73-74
VW Thing: 73-74
Quantity: Sold Each

Ball joint. Fits Thing 73-74
Quantity: Sold Each

Replacement spindle nut for your Type 2 Bus 1964-1967
27mm Hex
18 x 1.5 thread
Sold Each

Replacement spindle nut for your Type 2 Bus.
Spindle Clamp Nut Style
18mm x 1.0 thread
Left Hand
Sold Each.

Replacement spindle nut for your Type 2 Bus 1964-1967
Sold Each

Replacement spindle nut for your Type 2 Bus.
32mm Hex
22 x 1.5 thread
Sold Each

Replacement spindle nut for your Type 2 Bus.
Sold Each

Replacement spindle nut for your Type 2 Bus.
Right Hand
Sold Each.

Have a bent or damaged spindle? Here is a set of brand new ball joint spindles to get you back on the road. Let side is drilled for speedometer cable.

Available for ball joint only.
Machining required.
Sold in pairs.
Right and left hand thread.
Front Beam: Ball Joint
Quantity: 2 Pieces

Ball Joint Camber Adjusters. For Use When Lowering Your Ball Joint Front Suspension To Provide The Proper Camber. Sold In Pairs. Fits Ball Joint Front Ends Only

Replacement left side spindle nut for Type 1 66-79, Ghia 66-74 and Type 3 66-73. Application year: 66-79
Type 3: 66-73

Replacemant right side spindle nut fits Type 1 66-79, Ghia 66-74 and Type 3 66-73. Application year: 66-79
Type 3: 66-73

Replacement inner front wheel bearing fits type 1 66-68, ghia 66-68 and type 3 66-68. Application year: 65,66,67,68.
Inner diameter: 1.058 inches
Outer diameter 1.982 inches
Thickness: .420 inches

Replacemant inner front wheel bearing, fits type 1 69-79, ghia 69-74 and type 3 69-73. Application year: 68,69,70,71,72,73,74,75,76,77,78,79...
Inner diameter: 1.138 inches
Outer diameter: 1.982 inches
Thickness: .420 inches

Application year: 65,66,67,68,69,70,71,72,73,74,75,76,77,78,79

Replacement ball joint boot. Replace worn out or damaged boots with these new ones. Small end is just over 1/2 inches dia. Large end is just under 1 1/4 inches dia. These boots appear smaller but will fit a standard ball joint
Quantity: Sold Each

Premium replacemant inner front wheel bearing, fits type 1 69-79, ghia 69-74 and type 3 69-73. Application year: 68,69,70,71,72,73,74,75,76,77,78,79...
Thickness: .420 inches

Lower ball joints for vw beetle. Replace worn out and noisey joints with these new ones. Boots included. Must be pressed in and out. Will not work on Super Beetle
Quantity: Sold Each

Application year: 65,66,67,68,69,70,71,72,73,74,75,76,77,78,79...
Inner diameter: .685 inches
Outer diameter: 1.570 inches
Thickness: .420 inches

PREMIUM VERSION
Lower ball joints for vw beetle. Replace worn out and noisey joints with these new ones. Boots included. Must be pressed in and out. Will not work on Super Beetle
Quantity: Sold Each

Upper ball joints for vw beetle. Replace worn out and noisey joints with these new ones. Boots included. Must be pressed in and out. Will not work on Super Beetles
Quanitity: Sold Each

Front wheel bearing for 64-79 Type 2 Bus.
Location: Front Inner

PREMIUM VERSION
Upper ball joints for vw beetle. Replace worn out and noisey joints with these new ones. Boots included. Must be pressed in and out. Will not work on Super Beetles
Quanitity: Sold Each

Front wheel bearing for 64-79 Type 2 Bus
Location: Front Outer

Radiused lower ball joint, modified to allow more suepension travel for lowered or raised cars

Radiused upper ball joint, specially modified to allow more suspension travel for lowered or rased cars

Needle bearing for King pin front beams.
Beetle Type 1: 60-65 Upper/Lower
Ghia: 60-65 Upper/Lower
Beetle Type 1: 66-78 Upper
Ghia: 66-74 Upper

Outer Urethane Beam Bushing Kit for Ball Joint Beam.
These bushings will replace the seal and the outer needle bearing on your ball joint front suspension
Suspension: Ball Joints
Quantity: 4 Pieces

Needle bearing for Ball Joint front beams.
Beetle Type 1: 66-78 Lower
Type 3: 61-73 Lower
Ghia: 66-74 Lower

Inner and Outer Urethane Beam Bushing Kit For Ball Joint Beam.
This kit will replace the inner and outer needle bearings on your ball joint front suspension. It will also replace the seal. Great alternative to pressing in new needle bearings
Large Size
1.75 inches OD
1.42 inches ID
6.313 inches Long
Small Size
1.45 inches ID
6 inches Long
Replaces: Needle Bearings
Quantity: 4 Pieces

Replace your worn out stock torsion seal with these new oem replacements. Upper replacement. These go in between the trailing arm and the beam and prevent dirt from entering the beam cross tube.
Quantity: Sold Each

Replace your worn out stock torsion seal with these new oem replacements. Lower replacement These go between the front trailing arm and the beam to prevent dirt from getting into the beam cross tube
Ghia: 66-77
Quantity: Sold Each

Urethane Axle Beam Tube Seals for Ball Joint Beam.
These go between the trailing arm and the beam to keep out harmfull particles. A must when offroading
Suspension: Ball Joint
Quantity: 4 Pieces

Application year: 66-77. These are sold each so you will need 2 sets to complete a beam
Sold: Each

Ball joint. Fits super beetle type 1 71-5/73.
If you can lift your car up and the wheel can be moved in and out by pressing on the top or bottom of the tire, then it is time for new ball joints. Also squicking and creeking is a indicator that these are worn.
Super Beetle: 71-73-1/2
Quantity: Sold Each

PREMIUM VERSION
Ball joint. Fits super beetle type 1 71-5/73.
Quantity: Sold Each