TRAILING ARMS FRONT for Type II Bus Bus 1979

This heavy duty link pin is required when installing aftermarket front trailing arms. They are extra long to clear the extra material on the arms.
SOLD QNT 4

5/8 inches Diameter
116.7mm Long

This heavy duty link pin is required when installing aftermarket front trailing arms. They are extra long to clear the extra material on the arms. 4 pieces

7/8 inches Diameter
125mm Long.

Forged extended length trailing arms. For use with thru rods only
for remote mounted shocks

Forged extended length front trailing arms. For use with torsion bars or thru rods.


Will use original shock mount but requires 5/8 spacer

Forged extended length trailing arms. For use with thru rods only
for remote mounted shocks

The EMPI Ball Joint Trailing Arms are new, not rebuilt, and are forged just like the OEM models. Available as a set of 4 without Ball Joints or Complete with European Made Ball Joints installed. Complete with grub screws and caps.

Cap off the arms with these end caps.

Revitalize your steering feel and ride quality with new forged trailing arms for Link-King Pin beam applications. It’s never been easier to replace bent trailing arms with new forged OE quality arms. EMPI product engineers have created highly accurate reproductions of the OE forged trailing arms for pre-65 Beetles using 3D modeling and SolidWorks CAD for a perfect fit and trouble-free installation

Forged in alloy steel like the OE part, these trailing arms are finished in black

Please consult VW link pin shim chart for guidance, these trailing arms include the recess for O ring seal

EMPI is offering these forged trailing arms as a set of 4, please use part number 98-4570-B (Left and Right Upper & Lower Arms, one complete front axle)

OE Reference Numbers:
111-405-151C and 111-405-105D

EMPI is also offering these forged trailing arms individually for accident repair

Lower Control Arm, use part number
98-4571-B OE Reference Number 111-405-151C

Upper Control Arm, use part number
98-4572-B OE Reference Number 111-405-105D

Revitalize your steering feel and ride quality with new forged trailing arms for Link-King Pin beam applications. It’s never been easier to replace bent trailing arms with new forged OE quality arms. EMPI product engineers have created highly accurate reproductions of the OE forged trailing arms for pre-65 Beetles using 3D modeling and SolidWorks CAD for a perfect fit and trouble-free installation

Forged in alloy steel like the OE part, these trailing arms are finished in black

Please consult VW link pin shim chart for guidance, these trailing arms include the recess for O ring seal

OE Reference Number 111-405-151C

Revitalize your steering feel and ride quality with new forged trailing arms for Link-King Pin beam applications. It’s never been easier to replace bent trailing arms with new forged OE quality arms. EMPI product engineers have created highly accurate reproductions of the OE forged trailing arms for pre-65 Beetles using 3D modeling and SolidWorks CAD for a perfect fit and trouble-free installation

Forged in alloy steel like the OE part, these trailing arms are finished in black

Please consult VW link pin shim chart for guidance, these trailing arms include the recess for O ring seal

OE Reference Number 111-405-105D