JAYCEE PULLEYS for Type II Bus Single Cab 1960

Renew your existing pulleys with these steel acid etched degree rings. Uses a high grade epoxy already applied to attach to pulley face

This attractive drag pulley is made of 6061 billet aluminum, anodized for a long lasting finish, then re-machined for the complete 360 degrees of timing marks. No more degree rings to disappear or fade! The pulley is then mounted to a steel hub with 8 counter sunk Allen bolts, making this pulley clean, lightweight yet strong! Available in red, black, blue or silver. Comes in 4 1/2 & 5 1/4 diameters. The 4 1/2 pulley will clear all dry-sump oil pumps.

This attractive drag pulley is made of 6061 billet aluminum, anodized for a long lasting finish, then re-machined for the complete 360 degrees of timing marks. No more degree rings to disappear or fade! The pulley is then mounted to a steel hub with 8 counter sunk Allen bolts, making this pulley clean, lightweight yet strong! Available in red, black, blue or silver. Comes in 4 1/2 & 5 1/4 diameters. The 4 1/2 pulley will clear all dry-sump oil pumps.

This attractive drag pulley is made of 6061 billet aluminum, anodized for a long lasting finish, then re-machined for the complete 360 degrees of timing marks. No more degree rings to disappear or fade! The pulley is then mounted to a steel hub with 8 counter sunk Allen bolts, making this pulley clean, lightweight yet strong! Available in red, black, blue or silver. Comes in 4 1/2 & 5 1/4 diameters. The 4 1/2 pulley will clear all dry-sump oil pumps.

This attractive drag pulley is made of 6061 billet aluminum, anodized for a long lasting finish, then re-machined for the complete 360 degrees of timing marks. No more degree rings to disappear or fade! The pulley is then mounted to a steel hub with 8 counter sunk Allen bolts, making this pulley clean, lightweight yet strong! Available in red, black, blue or silver. Comes in 4 1/2 & 5 1/4 diameters. The 4 1/2 pulley will clear all dry-sump oil pumps.

Our two-piece billet 7 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove is matched to the stock offset for proper alignment. After anodizing the pulleys are remachined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. Uses stock 9.5 x 905 belt.

JayCee s new Broached Pulley Nut with 6061 Billet Hat & Heavy Duty Washer. Nut comes broached for a 3/8 ratchet to make installation or removal a breeze. The head has a reverse thread that the hat screws on, so while your engine is running the hat will not spin off, while the hat has a 5/32 Allen broach in the center to make installation or removal also a snap! O-ring seal eliminates vibration & scratching your pulley. The broached Pulley Nut comes with a Black Oxide finish while the hats are available in Silver or anodized Black, Red or Blue.

JayCee s new Broached Pulley Nut with 6061 Billet Hat & Heavy Duty Washer. Nut comes broached for a 3/8 ratchet to make installation or removal a breeze. The head has a reverse thread that the hat screws on, so while your engine is running the hat will not spin off, while the hat has a 5/32 Allen broach in the center to make installation or removal also a snap! O-ring seal eliminates vibration & scratching your pulley. The broached Pulley Nut comes with a Black Oxide finish while the hats are available in Silver or anodized Black, Red or Blue.

Our two-piece billet 7 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

Our two-piece billet 7 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

This attractive drag pulley is made of 6061 billet aluminum, anodized for a long lasting finish, then remachined for the complete 360 degrees of timing marks. No more degree rings to disappear or fade! The pulley is then mounted to a steel hub with 8 counter sunk Allen bolts, making this pulley clean, lightweight yet strong! Available in Red, Black, Blue or Silver. Comes in 4 1/2 & 5 1/4 diameters. The 4 1/2 pulley will clear all dry-sump oil pumps.

Our two-piece billet 7 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

Our two-piece billet 7 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

Our two-piece billet 5 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove is matched to the stock offset for proper alignment. After anodizing the pulleys are remachined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. Uses stock 9.5 x 905 belt.

Jaycee s two-piece billet street 6 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

Jaycee s two-piece billet street 6 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

Jaycee s two-piece billet street 6 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

Our two-piece billet 6 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove is matched to the stock offset for proper alignment. After anodizing the pulleys are remachined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. Uses stock 9.5 x 905 belt.

Jaycee s two-piece billet street 6 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look.

Ultimate power pulley. The smaller diameter reduces fan speed and produces 5+ more horsepower. Jaycee s two-piece billet street 5 1/4 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. They come in Red, Black, Blue, or Silver anodized finish.

Our two-piece billet 6 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove is matched to the stock offset for proper alignment. After anodizing the pulleys are remachined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. Uses stock 9.5 x 905 belt.

Ultimate power pulley. The smaller diameter reduces fan speed and produces 5+ more horsepower. Jaycee s two-piece billet street 5 1/4 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. They come in Red, Black, Blue, or Silver anodized finish.

Ultimate power pulley. The smaller diameter reduces fan speed and produces 5+ more horsepower. Jaycee s two-piece billet street 5 1/4 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. They come in Red, Black, Blue, or Silver anodized finish.

Our two-piece billet 7 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove is matched to the stock offset for proper alignment. After anodizing the pulleys are remachined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. Uses stock 9.5 x 905 belt.

Ultimate power pulley. The smaller diameter reduces fan speed and produces 5+ more horsepower. Jaycee s two-piece billet street 5 1/4 Power Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove was matched to the stock offset for proper alignment. After anodizing, the pulleys are re machined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. They come in Red, Black, Blue, or Silver anodized finish.

Our two-piece billet 7 Street Car Pulley is made of 6061 T-6 aluminum and bolts to a steel hub to insure strength. The machining process includes the stock style thread to eliminate crank case blow by. The belt groove is matched to the stock offset for proper alignment. After anodizing the pulleys are remachined the 360 degrees of timing marks to eliminate the old style stickers. The two pieces are mated together buy 8 countersunk allens to cap off the quality look. Uses stock 9.5 x 905 belt.