STUD KITS & SEALED BEARINGS for Type II Bus Single Cab 1960

Bearing kit for spindle mount king pin/link pin rims.
-2 outer bearings

Bearing kit for ball joint front spindle mount wheels. ONLY TO BE USED WITH ALUMINUM SPINDLE MOUNT WHEELS.
-2 bearing spacers

A must for installing aftermarket Douglas or CMS aluminum wheels.
-10 12mm studs
-10 aluminum washers
-10 chrome acorn lug nuts
Length 1.5 inches
Quantity: 10

A must for installing aftermarket Douglas or CMS aluminum wheels.
-8 14mm studs
-8 aluminum washers
-8 chrome acorn lug nuts
Thread: 14mm 1.5
Length: 1 3/4 inches
Quantity: Set of 8

Replacement 12mm stud for our 5 bolt stud kits

12mm lug nut with 60 degree taper. This is the same lug nut we use in our 12mm stud kit. Chrome finish

14mm lug nut with 60 degree taper. This is the same lug nut we use in our 14mm stud kit. Chrome finish
Quantity: Sold Each

Spindle mount bearing for king pin wheel. These bearings are sealed for extra protections. Outer bearing. Fits aluminum spindle mount wheels only. Steel wheels will use stock bearings

Raw finished lug bolt with VW ball seat. Lug bolts have 12mm x 1.5mm standard 15mm length threading.
Beetle: 46-67
Type 3: 62-65
Bus: 50-55
Size: 12mm 1.5mm
Quantity: Sold Each.

Sealed king pin inner bearing. Replacement for aluminum spindle mounts only. Not to be used on stock or steel wheels

Replacement 14mm lug bolt for VW. Sold each.
14mm x 1.5mm x 32mm
Ghia: 67-74

This spacer is needed to install ball joint spindle mount rims.
Sold Each

Wheels with spacers add up to the need for longer wheel studs. These 12mm studs give you a extra 3/16 inches on the wheel side to help compensate.
They are 1/2 inches longer then our standard stud.
Thread: 12mm 1.5.

Wheels with spacers add up to the need for longer wheel studs. These 14mm studs give you a extra 3/16 inches on the wheel side to help compensate.
Thread: 14mm 1.5.
5 Studs

Wheels with spacers add up to the need for longer wheel studs. These 14mm studs give you a extra 3/16 inches on the wheel side to help compensate.
They are 1/2 inche longer then our standard stud.
Thread 2: 1/2-20.

Chrome wheel locks to protect your wheels. All locks are the socket type which helps limit stripping out. Supplied with tool.
Thread 1: 14mm 1.5
Ball Seat.

Chrome wheel locks to protect your wheels. All locks are the socket type which helps limit stripping out. Supplied with tool.
Thread 1: 12mm 1.5.

Chrome wheel locks to protect your wheels. All locks are the socket type which helps limit stripping out. Supplied with tool.
Thread 1: 14mm 1.5

14mm lug nut with Ball Seat This is the same lug nut we use in our 14mm stud kit.
Quantity: Sold Each.

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 12mm
Quantity: Set of 5

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 12mm
Quantity: Set of 5

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 14mm
Quantity: Set of 5

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 14mm
Quantity: Set of 5

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 14mm
Quantity: Set of 5

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 14mm
Quantity: Set of 5

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 14mm
Finish: Raw
Quantity: Set of 5

These open end lug nuts are made from high quality aluminum alloy. They are 12 point 14mm
Quantity: Set of 5