BODY GASKETS for Type II Bus Single Cab 1969

This is the seal between the body and the chassis.
Vw restorers appreciate the water tight seal provided by the custom molded rubber design. Packaged in 19 foot length for complete installation.

OEM NUMBER:
113-701-605

Fits all standard bug & super beetle.
Slips into the metal crimp channel on the body and pinches the seal to hold it into place.

stock replacement seals

Beetle Type 1: 61-77
Super Beetle: 71-72
Material: Rubber

Fits 73-79 super beetle

stock replacement seals

Super Beetle: 73-79

Set of 2.

OEM NUMBER:
113-823-579A

Replacement handle seal for the engine compartment handle.

stock replacement seals
Fitment:
Beetle Type 1: 65-71
Bus Type 2: 66-67

Deck Lid Seal for All beetles

Stock replacement seals

Replacement handle seal for the engine compartment handle.

stock replacement seals
Fitment:
Beetle Type 1: 72-79
Bus Type 2: 67-79
Thing: 73-74

Shock Pad, Body to Frame, Rear, 17mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, 2 Pieces, These sit between the pan and body, and dampen road vibration. Typically there are 2 thicknesses used, 10mm and 17mm, these are the 17mm. Ideally you'd buy 2 sets of the 10mm thick, and 1 set of the thicker ones. Put the thin ones on all 4s, and IF there is a gap at one of the locations (typically the rear one in the rear wheel well), swap them out for the thicker ones, then bolt it down

Beetle Type 1: 50-79
Super Beetle: 56-74
Ghia: 56-74

Shock Pad, Body to Frame, Rear, 10mm Thick, 1956-77 Beetle, Super Beetle, Ghia, and THING, These sit between the pan and body, and dampen road vibration. Typically there are 2 thicknesses used, 10mm and 17mm, these are the 17mm. Put the thin ones on all 4s, and IF there is a gap at one of the locations (typically the rear one in the rear wheel well), swap them out for the thicker ones, then bolt it down

Beetle Type 1: 53-77

10MM Upper body mount for VW.

FITS
Type 1 53-77
Sold Each

With notches for bolts,
finish off your new paint job with new fender beading. This is for 1 fender.

Includes hardware

Beetle Type 1: All Years

Air vents for the rear of your beetle. Fits 72-77

6 pieces

White

Replacement molding kit.

CLIPS NOT INCLUDED.

Beetle Type 1: 67
Length: 37-1/4 inches Hood Strip
Quantity: 7 Pieces